Gtw485asjw3s Parts

The Washer Hub is an OEM replacement part for GE washing machines. It is a central component located inside the washing machine basket that the inner tub, drive motor, and suspension springs connect to. The washer hub rotates the washing basket during agitation and spinning cycles to clean clothes thoroughly.

Constant rotational motion and vibration placed on the hub can potentially cause cracks or weakness over an extended time. Improper load balancing causing excessive shaking may also damage the hub.

Symptoms of a bad washer hub include: 

• The washing machine basket fails to spin or agitate properly
• Loud grinding or clicking noises coming from inside the machine  
• Vibrations felt through the cabinets or floor during cycles
• Misalignment or wobbling of the inner washing tub

This OEM GE replacement part is compatible with some Hotpoint, RCA, and Kenmore.

The Lid Lock Wiring Harness is an OEM part for GE washing machines. It connects the lid lock mechanism to the washing machine’s control board, ensuring proper communication and functionality. This wiring harness is crucial for the safe operation of the washer, as it ensures the lid remains locked during certain cycles to prevent accidental openings and maintain safety.

You should replace the lid lock wiring harness if it becomes faulty. Causes of a bad wiring harness can include regular wear and tear, electrical faults, or damage from impacts or pinching. A damaged wiring harness can lead to communication errors between the lid lock and control board, resulting in improper functioning of the lid lock mechanism.

Symptoms of a bad lid lock wiring harness include:

• The washing machine not starting or stopping mid-cycle
• The lid not locking or unlocking properly
• Error codes related to the lid lock mechanism
• The washer not responding to control inputs

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fabric Softener Dispenser is an OEM part for GE washing machines. This dispenser ensures the accurate distribution of fabric softener into the wash cycle, allowing for even softening of your laundry. It releases fabric softener at the appropriate time, enhancing the washing process and leaving clothes feeling soft and fresh.

Causes of a bad dispenser can include clogs or blockages from fabric softener residue, wear and tear from frequent use, or mechanical failure within the dispenser components.

Symptoms of a bad fabric softener dispenser include:

• Fabric softener not dispensing during the wash cycle
• Residue or buildup in the dispenser compartment
• Leaks or drips from the dispenser area
• Clothes not feeling as soft as usual after washing

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Lock Bezel is an OEM replacement part for GE washing machines. It is a component that surrounds and secures the lid or door lock mechanism of the washer.

Symptoms of a bad lid lock bezel include:

• Difficulty in opening or closing the washer lid
• Washer lid not locking properly or feeling loose
• Cracks or damage to the bezel, affecting its ability to secure the lock mechanism
• Water leaks or moisture around the lid area

Causes of a bad washer lid lock bezel can include physical impact or mishandling, wear and tear over extended use, or issues with the locking mechanism itself.  

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore washer models.

The Hub Nut Washer is an OEM part for GE washing machines. It functions to secure the hub and ensure that the drum remains properly aligned during wash and spin cycles, contributing to the smooth operation of the washing machine.

Causes of a bad hub nut washer can include wear and tear over time, excessive vibration or movement, or exposure to harsh detergents. A damaged or worn-out hub nut washer can lead to issues with the drum's stability, affecting the overall performance of the washing machine.

Symptoms of a bad Hub Nut Washer include:

• Excessive noise or vibration during wash cycles
• The drum not spinning correctly or being misaligned
• Leaks around the drum area
• Loose or wobbly drum

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump Seal is an OEM part for GE washing machines. This seal ensures a watertight connection between the drain pump and the washer tub, preventing leaks during the draining process. It plays a critical role in maintaining the efficiency and cleanliness of the wash cycle by keeping water contained within the system.

Causes of a bad drain pump seal can include wear and tear from regular use, degradation due to exposure to harsh detergents or chemicals, or physical damage such as cracks or tears. A compromised seal can lead to water leakage and potentially damage other components of the washing machine.

Symptoms of a bad drain pump seal include:

• Water leaking from the bottom of the washer
• Unusual noises during the draining cycle
• The washer not draining properly
• Visible cracks or damage to the seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Thermistor is an OEM part for GE washers. This thermistor monitors and regulates the temperature inside your GE washer during the different cycles.

The thermistor ensures accurate temperature sensing by measuring the temperature of the water or air inside the washer and sends this information to the control board, allowing it to adjust the heating elements or cooling mechanisms accordingly.

A bad thermistor can occur due to wear and tear, exposure to extreme temperatures, or electrical malfunctions. If you notice symptoms such as the washer not heating or cooling properly, error codes indicating a faulty thermistor, or inconsistent temperature readings, it may be time to replace the component.

Symptoms of a bad thermistor include:

• Washer not heating or cooling properly
• Error codes indicating a faulty thermistor
• Inconsistent temperature readings

Restore accurate temperature control by replacing the faulty thermistor with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This washer drain hose carries used water from the drain pump to your home standpipe or laundry sink. Replacing a cracked, kinked, or leaking hose restores proper draining and helps prevent puddles and water damage.

• Directs wastewater from the washer during drain and spin cycles
• Replaces a hose that is split, brittle, kinked, or clogged
• Symptoms can include slow or no draining, water leaks during drain, or water left in the tub
• Visible wear or punctures on the hose indicate replacement is needed

• Unplug the washer and turn off water; pull the unit forward for access
• Expect residual water—use towels or a shallow pan
• Move the hose at the drain pump outlet and route to the standpipe or sink; secure with existing clamp/retainer
• Ensure a smooth, unkinked run with a proper high loop; test a drain cycle and check for leaks

The Internal Drain Hose Asm is an OEM part for GE washers. It is the hose located inside the washer that channels drained water from the tub out to the external drain system. 

Proper drainage is essential for washer operation. Causes of a bad internal hose can include cracks, kinks, or holes developing over time, especially in hoses made of brittle plastic material. Mineral buildup can also obstruct flow.  

Symptoms of a bad Internal Drain Hose Asm include:

• Puddling or pooling of water inside the washer tub after cycles
• Water not fully draining or draining slowly from the tub  
• Leaks or wet surroundings near the back of the washer

This GE replacement hose ensures your washer continues draining efficiently. This is also compatible with Hotpoint, RCA, and some Kenmore models.

The anti-siphon clip secures the washer's drain hose to a standpipe or laundry tub, maintaining the proper air gap to prevent siphoning and backflow. It keeps the hose stable so the washer fills and drains as intended.

• Maintains an air break at the drain to help stop unintended siphoning
• Holds the drain hose securely to a standpipe or sink/tub
• Helps prevent "filling and draining at the same time" or low water levels
• Helps keep the hose from vibrating loose or popping out during cycles

• Unplug the appliance and shut off water before starting
• Route the drain hose per the installation manual; avoid kinks or submerging the hose end
• Snap the clip onto the hose and fasten it to the standpipe or tub edge
• Run a quick test to verify no leaks and correct hose position

This button tree is the group of selector buttons behind the control panel. It restores reliable button action so you can choose cycles and options when keys stick, feel mushy, or stop responding.

• Provides the push-button interface for cycle and option selections on the control panel
• Helps address unresponsive or intermittent keys
• Resolves sticking or jammed buttons
• Restores proper alignment and tactile feel

• Disconnect power to the appliance before servicing
• Remove the console/control panel to access the button tree
• Seat the new button tree so each button aligns with the control board switch positions and the overlay
• Handle the user interface board and wiring gently; do not force clips or tabs

The 1/2 HP Motor and Nut is an OEM washing machine component specifically designed for GE top-load washers. It provides the primary power source for agitation and spinning motions. 

Centrally located inside the washer base, the sturdy universal motor efficiently rotates the drive shaft through a coupling and rear axle assembly. A large hexagonal nut secures this drive hub connection with the tub.

Symptoms of a bad motor include:  

• Failure to start or complete agitation/spin cycles
• Abnormal noises such as grinding or knocking sounds  
• Motor overheating or burnt smells detected

Causes relate to normal motor coil degradation from continuous load cycling. Replacing with this authentic GE OEM part restores optimized power and torque transmission for thorough cleaning. Compatible units include select Hotpoint, RCA, or Kenmore top-load models.
 

The Selector Switch is an OEM component specifically designed for GE washers. This switch is responsible for selecting the desired cycle and option settings on the washer control panel. 

The selector switch allows the user to choose from various wash cycles like normal, heavy duty, gentle, and sanitize. It also enables cycle customizations like soil level, water temperature, and spin speed. The switch works together with the control board to accurately coordinate all washer functions based on the selected settings.

Symptoms of a bad selector switch include:

• Unable to select any wash cycles or options
• Wash cycles not functioning as intended  
• Switch getting stuck or not responding properly
• Control panel lights/display not working correctly

Replace yours with this genuine GE OEM part to ensure your washer control interface works dependably. This replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Includes 4 selector switches and wiring harnesses

This pulley nut secures the washer's drive pulley to the shaft to keep the belt aligned and power transfer reliable. Replacing a worn or missing nut restores stable spin performance and helps prevent belt slippage and noise.

• Locks the drive pulley to the shaft for proper belt alignment and consistent power transfer
• A loose or stripped nut can cause pulley wobble, belt squeal, slippage, or the belt coming off
• Replace if the original nut is damaged, missing, or will not stay tight after adjustment

• Disconnect power and water supply; safely tip or elevate the washer for bottom access
• Remove the drive belt; hold the pulley while loosening the nut (verify thread direction—do not force)
• Hand-start the new nut to avoid cross-threading; tighten securely per service information and confirm pulley runs true
• Reinstall the belt, verify alignment, and rotate by hand before restoring power

The Platform Bearing Retainer & Fasteners is an OEM part for GE washers. It serves as a backing plate that secures the suspension assembly bearing in place on the washing machine tub. The retainer helps manage stress and distribute weight evenly across the bearing. 

Causes of a bad retainer and fasteners include worn threads, stripped holes, or loose mounting from repeated vibration and load shifting during the spin cycle.

Symptoms of a bad Platform Bearing Retainer and fasteners include:

• Excessive vibration or shaking of the washing machine tub 
• Noise or grinding sounds from the suspension assembly
• The tub not sitting level or wobbling during the operation
• Leaks caused by stress on the tub seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Size: 10-32 GXTT FLP.595 S