We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This locking clip secures a mating part—often a control knob—onto its shaft on select laundry appliances. Replacing a worn or missing clip restores a tight fit so controls stay in place and operate as intended during use.
Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more
Most orders arrive by Wednesday, November 25
Original OEM Phillips wafer head screw 8 - 18 X 3/8 inch
Adjustable leveling leg threads into washer base to stabilize cabinet and reduce vibration. Replace if cracked, broken, or missing for proper support.
Replace the Washer tub Dampening straps helped to reduce the vibration noise.The Video was great too. Read more
Fix leaks or loose connections in your washer with this clamp. Secures hoses, sensors, and wiring harnesses. Simple installation takes minutes.
Cushions where the washer lid meets the top panel to soften closure and protect the finish. Replace worn, cracked, or missing bumpers to reduce noise.
The problem was most likely the evaporator fan motor but it could have been a bad blade, loose parts or bad motor mounts. Hard to tell without taking everything apart and inspecting. Since fridge was 17 years old I decided to order the entire evaporator fan assembly as shown in the parts diagram including fan blade, motor brackets, motor, motor mounts, screws, etc. Getting to the assembly involved removing the ice maker unit plus the entire rear inside of the freezer section. Parts cost around... Read more
Replaces a cracked or leaking wash tub to restore water containment and drum support. Fixes leaks, rubbing noises, and vibration. Confirm fit by model.
I ordered a new mode selector and new tub bearing. Upon disassembly, I noticed that the plastic outer tub had actually heated up around the tub bearing and tub seal area, such that the new tub seal did not fit tightly. I ordered a replacement outer tub, and reassembled all the new parts. During assembly, I installed the new tub seal upside down, but recognized it while re-watching the how-to video. I pulled the assembly back off and flipped the seal over, then reassembled it again. I also put... Read more
A small mounting support that provides a stable anchor point for screws used to secure panels or internal assemblies. Replacing a damaged screw platform restores proper fastener engagement and reduces panel movement and vibration. What it does:
Washer not filling with water or filling slowly? This 2-valve wire harness connects your control board to water valves, restoring proper fill and rinse cycles.
Refrigerator not cooling or humming without starting? The compressor pumps refrigerant to cool your fridge. Requires EPA certification for install.
Replace a cracked or damaged washer top cover to restore your machine's appearance and protect internal components from dirt and debris intrusion.
Nonmetal shim that maintains proper spacing and alignment in refrigerator hinge assemblies. Replace if worn, missing, or cracked to prevent vibration.
I pried the cover off top freezer hinge with my fingers. Used nut driver to remove 3 screws. Lifted freezer door up and off. Used screwdriver to remove 3 screws at top of frig door hinge. Lifted frig door up and off. Added the Shim-Non nylon washer to bottom of frig door pin to lift the door up slightly. Set door back on pin, replaced pin assembly (3 screws) holding the top of the frig door, set freezer door back on pin, replaced top freezer hinge. The entire repair only took a few minutes.... Read more
Refrigerator not defrosting or icing up excessively? A failed defrost timer won't cycle between cooling and defrost modes. Moderately easy repair restores function.
Tested for faulty defrost timer, replaced it Read more
Fix a refrigerator that won't cool or runs constantly with this compressor. Essential sealed system component. Professional installation recommended.
Secures and organizes wiring harness in top-load washers. Replace if broken, missing, or worn to keep wires properly routed and prevent chafing.
Central control knob for washer control panel. Selects wash cycles, temperatures, and options. Replace if cracked, broken, or difficult to turn.
Plastic bushing that fits inside your washer's lid hinge for smooth pivoting. Replace if worn, cracked, or causing lid misalignment and squeaking.
Not hard when you have videos and a mechanical background....piece of cake.... Read more