Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gtwn4560lows Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Agitator Coupler
Genuine Ge part
By: Ge
Part Number: WH43X10032

Washer won't agitate or spins but doesn't clean clothes? The agitator coupler connects the agitator to the drive shaft. Easy DIY repair with video guide.

Do-It-Yourself Stories from Customers like You My 10 year old ge washing machine's agitator stopped spinning suddenly   Alicia B. • El Mirage , AZ • August 28, 2015

Before buying a new ($1200) washer, I found the trouble shooting guide and decided to check if my problem was a simple fix or a complicated procedure... turns out it was the simple fix. Removing the agitator was the hardest part, it lifted straight up, but took some muscle and a belt for leverage. Then I had to remove one bolt, lift off the damaged part, and put the new part on with the one bolt. Done. Works perfectly. Read more

More
$22.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Drain Hose Clip
Genuine Ge part
By: Ge
Part Number: WH16X513

The Drain Hose Clip is an OEM part for GE washing machines. It secures the drain hose to the back of the washer, preventing it from becoming dislodged during operation. This ensures that water is properly directed out of the washer and into the household drain system, preventing leaks and water damage.

Causes of a bad drain hose clip can include wear and tear from regular use, damage from improper handling during installation or maintenance, or breakage due to repeated stress and movement of the washer.

Symptoms of a bad drain hose clip include:

  • Water leaking from the back of the washer
  • Drain hose detaching or becoming loose during operation
  • Difficulty securing the drain hose in place
  • Visible damage or cracking on the clip

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: For the entire drain hose, use part number WH41X10096.

Do-It-Yourself Stories from Customers like You Discharge hose for 15 year old hot point washer   Edith P. • Shelton , CT • October 06, 2014

The fix was so easy 2 screws and done, the part i ordered came the following day, i didnt expect it to arrive for another 3 to 4 days, excellent service , shipping, recieved the correct parts, and they have everything in stock, i would recommend Appliance Parts Pros to everyone, you wont be let down, believe me, thank you for the fast service, i give them 10 stars, Read more

More
$11.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Switch Assembly With Wire Harness
Genuine Ge part
By: Ge
Part Number: WH12X10334

Washer won't spin or agitate? This lid switch assembly detects if the lid is closed. Moderate DIY repair—front panel removal required. Video available.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Would not spin or agitate   Jason F. • Lebanon , CT • October 11, 2014

Replaced lid switch assembly Read more

More
$35.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Pressure Switch Hose
Genuine Ge part
By: Ge
Part Number: WH41X365

Connects the pressure switch to the tub in top-load washers. Replace if cracked, punctured, or brittle to restore proper water level monitoring.

This part fixes the following symptoms
  • Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You Water level shutoff switch did didn't work allowing the washer tub to overfill   William H. • Papillion , NE • March 22, 2015

I replaced the water level switch and hose. After removing the hose, I found that it was clogged, and did not allow the water level to be sensed by the switch. A test after the replacement of the parts was successful. While filling the tub, the water shut off at the small, medium, and large levels as indicated by the switch. Read more

More
$17.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Main Control Board
Genuine Ge part
By: Ge
Part Number: WH12X10614C

Washer won't start or stops mid-cycle? This main control board restores cycle selection and timing. Common DIY fix, takes about 10-20 minutes to install.

Do-It-Yourself Stories from Customers like You Washer would not fully drain   Lawrence R. • Bremen , AL • June 25, 2019

I replaced the belt and the pump. It now works like it is new again! I am glad that I purchased the belt installation tool. It made replacing the belt very easy. I also purchased the Control Assembly which I did not install. It wasn't needed to repair the washer but I will keep it in case it is needed for future repairs. Of the 3 different web sites I looked at, AppliancePartsPros was the best price and the parts were at my house in 2 days. I will use AppliancePartsPros again if and when I need... Read more

More
$187.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Compression Ring
Genuine Ge part
By: Ge
Part Number: WH02X10093

The Compression Ring is an OEM part for GE washing machines. This ring is essential for securing the tub within the washing machine, ensuring it remains in place during the wash and spin cycles. It helps maintain the stability and proper function of the washing machine.

You should replace the compression ring if it becomes worn, cracked, or damaged. Causes of a bad compression ring can include frequent use, high-stress loads during wash cycles, or physical damage, which can lead to instability and poor washing performance.

Symptoms of a bad compression ring include:

  • Excessive shaking or movement of the washing machine during cycles
  • Unusual noises during operation
  • The washing machine tub appearing misaligned or loose
  • Ineffective washing due to instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The timer switch came detached from the bracket and the dial slot slipped out of the shaft until i saw the repair video i did not know about the clip that locks the dial to the shaft   Jeffery B. • Donalsonville , GA • September 04, 2015

I removed the dial knob and plate as instructed by the video, removed the front panel of the washer to access the switch. I found the plastic molded bracket that the timer rests on to be broken and the tab on the timer where it is attached by a screw to be broken. I ordered a replacement switch, dial and knob. When it arrived I replaced the parts as instructed, but I had to use super glue to hold the new switch in place due to the support tab on the washer panel being broken off. After letting... Read more

More
$18.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Rod & Spring Assembly
Genuine Ge part
By: Ge
Part Number: WH16X10158

Suspension rod and spring assembly that supports and stabilizes the washer tub. Replace if rod is broken, spring is worn, or assembly is damaged or missing.

Do-It-Yourself Stories from Customers like You The washer was not staying balanced in the spin cycle   Angela W. • Manawa , WI • February 07, 2016

I replaced the suspension rods -- I am NOT particularly experienced with machines of any type, so it took me longer than it might have someone else, but once I figured out what I needed to do, everything went very smoothly. The washer spins like a dream now! Read more

More
$37.68

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Start Stop Switch Button
Genuine Ge part
By: Ge
Part Number: WH01X10088

The washer start stop switch button is the physical push button on your washing machine's control panel that signals the machine to begin or pause a cycle. It connects to the underlying switch mechanism that sends an electrical signal to the control system. Replace this part when pressing the button does nothing, the button feels mushy or broken, or the washer will not start or stop responding to that control.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You The posh button was gone   Steven B. • Ute , IA • April 17, 2015

All I had to do was remove 3, 1/4" screws from the back and take the front off. Two 5/16th screws hold the circuit board in place, remove them and press the button into the hole from the back. Replace the circuit board, slide the front back on and install the three 1/4" screws. Always unplug the washer first! Read more

More
$21.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Drain Pump Inlet Hose
Genuine Ge part
By: Ge
Part Number: WH41X22935

Drain pump inlet hose for top-load washers. Connects the tub to the pump assembly. Replace if cracked, leaking, or has holes causing water on the floor.

Do-It-Yourself Stories from Customers like You Drain hose was leaking   Haide H. • Chatham Township , NJ • May 01, 2017

The video was very helpful. the hardest part is getting off old rusted parts. I had to use a hacksaw to remove one of the old clamps. I had to open the bottom of the washing machine to remove of the other clamp. Putting the new parts on was easy. Getting everything apart was a challenge. Putting the new parts on was an easy 5 minute job. Read more

More
$20.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Rod And Spring Assembly
Genuine Ge part
By: Ge
Part Number: WH16X10159

Suspension rod and spring assembly for top-load washers. Mounts between tub and cabinet to absorb vibration. Replace if cracked, broken, or corroded.

Do-It-Yourself Stories from Customers like You The washer was not staying balanced in the spin cycle   Angela W. • Manawa , WI • February 07, 2016

I replaced the suspension rods -- I am NOT particularly experienced with machines of any type, so it took me longer than it might have someone else, but once I figured out what I needed to do, everything went very smoothly. The washer spins like a dream now! Read more

More
$91.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Fabric Softener Dispenser Cup
Genuine Ge part
By: Ge
Part Number: WH43X139

Fabric softener not dispensing or agitator loose? This washer dispenser cup sits atop the agitator. Simple DIY fix—twist off and replace in minutes.

Do-It-Yourself Stories from Customers like You Agitator not agitating no softener dispenser   Raymond S. • Haslet , TX • August 17, 2015

Planning to spend hundreds on a new washer and was pleased to discover the agitator coupling was the only thing wrong. Very easy repair. The only additional feature we would have liked was a softener dispenser. Located a GE model of the same genre that used the same coupler and took the leap to get the agitator and dispenser cup for this model (WJRR4170). Replaced the old agitator with new one and dispenser cup. Worked perfectly! We now have a washer with dispenser that works great and saved... Read more

More
$31.34

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Rod And Spring Assembly
Genuine Ge part
By: Ge
Part Number: WH16X10057

Suspension rod and spring assembly for washer drum stability. Replaces worn, broken, or weakened suspension components causing drum movement or sagging.

Do-It-Yourself Stories from Customers like You Agitation and spin cycle completely stopped   Tonya G. • Philadelphia , PA • September 02, 2020

I have a 14 year old GE washing machine that had been making a lot of noise while running but had eventually just stopped flat. The agitator and spin cycle would not run. I found this site and made excellent use of all the repair videos to study about my issue. I put in my machine model number and I Immediately was able to start honing in on what my problem could be from website advice about popular repair parts, stories others had shared about their similar machine issues and watching videos,... Read more

More
$34.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Suspension Rod And Spring Assembly
Genuine Ge part
By: Ge
Part Number: WH16X544

Supports the washer tub and absorbs vibration during cycles. Replace if corroded, worn, or broken to prevent drum sagging and banging during operation.

Do-It-Yourself Stories from Customers like You Agitation and spin cycle completely stopped   Tonya G. • Philadelphia , PA • September 02, 2020

I have a 14 year old GE washing machine that had been making a lot of noise while running but had eventually just stopped flat. The agitator and spin cycle would not run. I found this site and made excellent use of all the repair videos to study about my issue. I put in my machine model number and I Immediately was able to start honing in on what my problem could be from website advice about popular repair parts, stories others had shared about their similar machine issues and watching videos,... Read more

More
$48.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Inlet Valve
Genuine Ge part
By: Ge
Part Number: WH13X10037

Fix no hot water, leaking when washer is off, or weak water pressure. This triple water inlet valve controls hot, cold, and warm water flow. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Dripping water when not running   John S. • Richardson , TX • January 13, 2015

Replaced solenoid valve. Repair summary: Turn off H/C water supply, disconnect hoses. Unscrew 3 screws rear of main panel. Slide front panel laterally then pull up to remove. Unscrew 2 screws on solenoid valve part. Disconnect spade electrical connectors and remove defective part. Insert new part and do everything I just said in reverse. It was so easy a drunken monkey could have done it. Read more

More
$72.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Mode Shifter & Shaft Assembly
Genuine Ge part
By: Ge
Part Number: WH38X10017

The Mode Shifter & Shaft Assembly is an OEM replacement part for GE washing machines. It is a mechanical component located inside the washer tub that allows for shifting between agitation, spin, and other cycles. The mode shifter and shaft assembly receive input from the control system to precisely change the operational mode at designated points in the cycle.

Causes of a bad mode shifter & shaft assembly include worn out or damaged internal gears, stripped or broken shafts, or a loss of integrity in components that restrict smooth shifting between modes.

Symptoms of a bad mode shifter & shaft assembly include:

  • Inability to start or change wash cycles
  • The washer getting stuck in one mode of operation
  • Grinding noises and vibrations during cycle shifts
  • Premature ending of cycles

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washer would not spin nor adgitate   Jeff A. • Stow , OH • June 28, 2015

Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more

More
$272.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Switch Magnet
Genuine Ge part
By: Ge
Part Number: WH12X10276

Washer won't spin or agitate? A faulty lid switch magnet may be the cause. This part signals the switch that the lid is closed. Easy 20-minute DIY fix.

Do-It-Yourself Stories from Customers like You Bad lid switch on a ge washer wouldn't agitate or spin   David C. • Saline , MI • October 26, 2015

Replaced lid switch and lid magnet. Took just a little longer then 20 minutes as I had to splice in the new lid switch as it wasn't one that was a clip in, it was hard wired in. Read more

More
$19.31

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google