Gud24essmww Parts

The Drive Belt is an OEM replacement part for GE laundry centers. The belt is specifically designed to fit and function optimally in the compact design of GE laundry centers.

Causes for a malfunctioning Drive Belt can include wear and tear from regular use, overloading the dryer, causing strain on the belt, or the belt becoming misaligned or dislodged from its track.

Symptoms of a bad Drive Belt include:

• The dryer drum failing to turn even though the motor is active
• A thumping or squealing noise during the dryer's operation
• The dryer not starting or failing to produce heat
• Clothes remaining damp after the cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer is an OEM part for GE electric dryers. It serves as the critical control module that monitors and regulates dryer cycle times during functions like regular, wrinkle guard, fluff and more.

Causes of a bad timer include failure of internal electronic components or wiring connections due to prolonged exposure to heat and vibration inside the dryer cylinder. Mechanical wear of buttons or dials used to program cycles may occur as well over time.

Symptoms of a bad Timer include:

• Inability to set or change desired drying times accurately
• Premature stopping or starting of cycles without user input
• Faulty time or status display windows during use
• Complete shut down requiring manual override or reset

The GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.

The Dual Coil Water Valve is an OEM replacement part for GE washing machines. It is a solenoid valve that controls the flow of hot and cold water to the washer.

Symptoms of a faulty valve include: 

• Failure to adequately fill or drain the wash tub
• Imprecise washing from too much or too little water  
• Oversudsing or excess vibration due to unbalanced levels

Causes can be worn seals or mineral buildup impeding proper valve movement after extended use.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Board & Support Assembly is an OEM replacement part for GE washer/dryer combination laundry centers. This assembly features both the control board and its supporting structure. The control board is responsible for managing a variety of functions for both the washing machine and dryer, including cycle selection and timing, while the support secures the board in its proper position.

Causes for a malfunctioning Board & Support Assembly can include electrical issues like short circuits or power surges, as well as physical damage from impact or mishandling.

Symptoms of a bad Board & Support Assembly include:

• Difficulty in selecting or initiating wash or dry cycles
• Unresponsive or malfunctioning buttons on the control panel
• Error messages appearing on the display
• Inconsistent performance in either the washer or dryer

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lint Trap Assembly is an OEM part for GE dryers. It is responsible for capturing lint and debris from the dryer exhaust, preventing it from clogging the venting system and causing potential fire hazards.

A bad lint trap assembly can be caused by regular use, accumulation of lint, or damage to the trap itself. If the lint trap becomes clogged, torn, or worn out, it can lead to reduced airflow, longer drying times, or even overheating of the dryer.

Symptoms of a bad lint trap assembly include:

• Excessive lint buildup on clothing after drying.
• Longer drying times than usual.
• Overheating of the dryer.
• Visible damage or tears on the lint trap.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Cycling Thermostat is an OEM replacement part for GE dryers. It regulates heating element output and drum temperature during drying cycles. Maintaining proper air and drum temperatures is key to achieving thorough moisture removal from fabrics within targeted cycle times.

Causes of failure typically involve defects developing over many heat exposure and cool-down cycles. Mineral deposits accumulating on the thermostat head can also impact heat-sensing precision over extended use. 

Symptoms of a bad cycling thermostat include:

• Slow or inadequate drying times
• Excessively long cycles for normal loads  
• The dryer turning on/off irregularly while operating
• Unpredictable or fluctuating drum temperatures

This OEM replacement thermostat is compatible with GE, Hotpoint, and some Kenmore models.

The Power Terminal Block is an OEM part for GE dryers. This component serves as the connection point for the dryer's power cord, distributing electrical power to the various internal components of the dryer. It ensures that the dryer receives the proper electrical supply needed for its operation.

Causes of a bad power terminal block can include electrical overloads, corrosion from moisture exposure, and loose or frayed wiring connections. These issues can lead to improper power distribution or complete loss of power to the dryer.

Symptoms of a bad power terminal block include:

• The dryer not starting or losing power during a cycle
• Intermittent electrical issues or power surges
• Visible signs of damage such as burn marks or melted plastic
• Electrical arcing or sparking from the terminal block area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The UI Board Assembly is an OEM part for GE electric and gas laundry centers. Located inside the combined washer/dryer cabinet, the UI board directs all washing and drying functions through a centralized control interface. Coordinating two appliances requires a robust control system.

Causes for replacement can include circuit failure from accumulated moisture exposure over many years of use. The humid environment inside a laundry center puts a greater strain on electronic parts.

Symptoms of a faulty UI board include:

• Inoperable or unresponsive control panel  
• Failure to start wash or dry cycles
• Inability to adjust settings for either appliance
• Random starting or stopping during operation

This genuine GE part restores full customized functionality for both the washer and dryer. Whether drying laundry efficiently or completing extra large loads, dependable controls are crucial. Compatible with most GE electric and gas laundry center models, this replacement maintains long-term reliability.
 

This small replacement magnet works with the washer's lid/door lock sensor to ensure the lid or door is closed. Restores proper safety interlock operation so cycles can start and spinning is allowed. What it does:

• Triggers the lock/switch sensor so the control knows the lid/door is closed
• Helps prevent operation with an open lid/door
• Common symptoms of a failed/missing magnet: won't start or spin; "lid/door open" indications; intermittent pausing
• Replacing a weak, cracked, or missing magnet restores reliable closure sensing

• One magnet

• Disconnect power before servicing
• Access the magnet location in the lid/door area; note the original orientation
• Seat the new magnet fully in its holder; reuse any existing clip or fastener
• Reassemble and test that the lock engages and the lid/door-closed indicator is recognized

This shifter spring helps engage and return the transmission shifter mechanism in select top-load washers, allowing smooth changes between agitation and spin for reliable wash performance.

• Maintains proper tension on the shift mechanism between agitate and spin
• A worn or broken spring can cause no spin, no agitate, or loud shifting noises
• May also lead to intermittent shifting or incomplete cycles
• Restores consistent mechanical engagement of the drive system

• Unplug the washer and shut off water supply before servicing
• Access is typically from the cabinet/rear; support the tub to prevent movement
• Note spring orientation and attachment points before removal
• Use needle-nose pliers or a spring tool; replace any severely worn mating parts

The Speed Sensor is an OEM replacement part for GE washing machines. It regulates the rotation speed of the wash basket during various cycles like agitation, spin, and rinse modes. Precise speed control allows the washer to thoroughly clean laundry efficiently while preventing damage.

Causes of a bad speed sensor can include wear and tear of internal components from heavy or unbalanced loads over time. Improper installation during manufacturing may also lead to unexpected failures.

Symptoms of a bad speed sensor include:

• The washer failed to agitate, spin, or rotate the basket
• Inconsistent or fluctuating basket speeds
• Vibration and noise during operation
• Inability to complete full cycles

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This lid actuator engages the washer's lid switch or lock when the lid closes, signaling the control that it's safe to run. Replacing a worn or broken actuator restores reliable lid detection for wash and spin cycles.

• Engages the lid switch/lock when the lid is closed
• Signals the control to allow the washer to start and spin
• A damaged or missing actuator can lead to "lid open" errors
• Common symptoms include won't start, won't spin, or lid lock light flashing

• Disconnect power before servicing
• Access the lid switch/lock area; remove the failed actuator
• Install the new actuator, aligning it to the original mounting points; reuse existing hardware
• Close up and test lid detection before running a full cycle

This drain hose assembly carries wastewater from the washer to the household standpipe or laundry tub. Replacing a cracked, kinked, or leaking hose helps restore proper draining and reduces the risk of water on the floor. What it does

• Routes drain water from the pump to the standpipe or laundry tub
• Helps maintain proper flow during drain/spin cycles
• Addresses leaks behind or under the washer caused by a damaged or loose hose
• Can help resolve slow or incomplete draining due to kinks, splits, or blockages

• Includes 1 drain hose assembly

• Unplug the washer and turn off water supply; have towels or a pan ready for residual water
• Move the appliance for access; note original hose routing and connection points
• Transfer and securely tighten any existing clamps/connectors; push hose fully onto fittings
• Route without sharp bends; secure outlet in the standpipe or sink and test for leaks

The GE Transmission Platform Asm & Nut is an OEM component specially designed for GE stackable laundry pairs. This kit includes the transmission platform assembly and nut, which connect the transmission to the tub and drive the wash basket during the wash cycle. 

Causes of a bad transmission platform assembly and nut can include wear and tear over time, cracks or breaks due to repeated impacts during washing, or stripped threads on the nut from overtightening.

Symptoms of issues include: 

• The wash basket not spinning or agitating during the cycle
• Grinding or rubbing noises coming from the drive train 
• Excessive vibration felt through the washer cabinet
• Off-balance loads or laundry not fully extracting

This OEM GE replacement kit is also compatible with some Hotpoint and RCA washers. 

This safety thermostat mounts on the left side of the dryer's heater/air duct. It helps protect the dryer by opening the heat circuit if temperatures climb too high, preventing overheating and enabling safe operation.

• Monitors dryer temperature and opens the circuit when excessive heat is detected
• Helps prevent overheating that could damage components or fabrics
• Typical failure symptoms: no heat, long dry times, very hot cabinet, or a burning smell
• Location-specific part: installs on the left side of the heater housing/exhaust duct

• Disconnect power; for gas dryers, also shut off gas supply
• Access the heater housing/exhaust duct; note left-side location and take a photo of wire positions
• Transfer wires one at a time and secure the thermostat with existing hardware
• Clean lint paths and verify venting/airflow to prevent repeat overheating

The Basket Kit is an OEM part for GE washing machines. It includes the inner wash basket, which holds the clothes during the wash and spin cycles. This basket is designed to withstand the rigors of heavy loads and constant use, ensuring efficient and effective cleaning while maintaining the integrity of the clothes being washed.

Causes of a bad Basket Kit can include prolonged exposure to harsh detergents, physical damage from overloading or sharp objects, and general wear and tear from frequent use. 

Symptoms of a bad Basket Kit include:

• Unusual noises during the wash or spin cycles, such as banging or rattling
• Visible cracks, breaks, or rust spots on the basket
• Clothes coming out torn or snagged after washing
• The washer not spinning or draining properly due to basket issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.