Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Door Latch is an OEM part for GE dryers. This part ensures the dryer door stays securely closed during operation, activating the safety switch to allow the dryer to operate. The latch mechanism engages with the door strike to lock the door, preventing it from opening while the dryer is running, which is essential for both safety and proper functioning of the appliance.
Causes for replacement can include normal wear and tear, accidental damage, or a misalignment that prevents the door from securely latching.
Symptoms of a bad Door Latch include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ... Read more
Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.
Ordered a new compressor and repaired by 3rd party. Read more
The Board & Support Assembly is an OEM replacement part for GE washer/dryer combination laundry centers. This assembly features both the control board and its supporting structure. The control board is responsible for managing a variety of functions for both the washing machine and dryer, including cycle selection and timing, while the support secures the board in its proper position. Causes for a malfunctioning Board & Support Assembly can include electrical issues like short circuits or power surges, as well as physical damage from impact or mishandling. Symptoms of a bad Board & Support Assembly include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
After a power surge due to a panel miss-wire, I burned up the board on a washer/dryer combo. I had an electrician fix the panel and ordered a new board from Appliance Parts Pros. Installation took about 30 minutes and after that, everything worked fine. Read more
The Dual Coil Water Valve is an OEM replacement part for GE washing machines. It is a solenoid valve that controls the flow of hot and cold water to the washer.
Symptoms of a faulty valve include:
Causes can be worn seals or mineral buildup impeding proper valve movement after extended use.
Replaced the water fill water valve. Read more
Internal lint filter that traps fabric dust and protects dryer components. Replace if damaged, lost, or clogged. Verify fit with your model number.
Replaced it Read more
The Timer is an OEM part for GE electric dryers. It serves as the critical control module that monitors and regulates dryer cycle times during functions like regular, wrinkle guard, fluff and more. Causes of a bad timer include failure of internal electronic components or wiring connections due to prolonged exposure to heat and vibration inside the dryer cylinder. Mechanical wear of buttons or dials used to program cycles may occur as well over time. Symptoms of a bad Timer include:
The GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models.
Replaced the timer switch and knob. Read more
Fix a washer that won't drain or leaves standing water. This drain pump removes water from the drum during drain and spin cycles. Moderate DIY repair.
Great Read more
The bearing mechanism located at the top of the dryer drum that supports the drum's rotation and reduces friction during operation. Replace when you hear grinding or squealing noises, the drum wobbles, or clothes don't tumble properly.
Initially I replaced the rear drum bearing assembly. I searched all over for a good how-to video and came across the Appliance Pros tutorial on YouTube. It was by far the easiest to understand with the added bonus that AP had the parts I needed. I had never done this before, but using the video as my guide I was able to replace the rear bearing assembly in about an hour and a half. It would've taken a little less time if I hadn't had to run to the hardware store for a T25 bit. I also could... Read more
Fix excessive vibration and banging during spin cycles. This suspension rod stabilizes the tub in your washer dryer combo. Moderate DIY repair—4 rods total.
The Agitator Kit is an OEM part for GE washing machines. It contains the agitator shaft and center bolt. These agitator components play an important role in the washing process, generating powerful motion to loosen and remove stain-causing residues from clothing loads.
Causes of a faulty agitator include excessive wear and tear over repeated usage, accidental damage from overloading or foreign objects, or corrosion from mineral buildup.
Symptoms of agitator issues consist of:
This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
It was super easy- Pop off the top where the fabric softener goes- undid bolt pop out the agitator ( the hardest part getting this out and the new one in). Got the new one lined up push in place use a rubber mallet to secure put in bolt and good to go May I say this company is excellent- great customer service and delivers as said 5 stars all the way. Read more
Control board failed and washer or dryer won't start? This UI board assembly manages all washing and drying functions in your laundry center unit.
I put the part on. It matched correctly. The washing machine is working better than ever! Read more
Dryer won't heat, overheats, or shuts off mid-cycle? A faulty cycling thermostat often causes these issues. Easy DIY fix with our video guide.
Tested the old t-stat with ohm meter. When shaken, the contacts would open. Replaced it with new t-stat and it works fine now. Thanks! Read more
Washer won't fill or advance past start? Mode shifter assembly controls transitions between wash, spin, and dry cycles. Moderate DIY repair, 1-2 hours.
I purchased a new mode shifter part and replaced the old one. It was difficult mostly because I did not remove the unit from the drum. I could not see underneath and so it took an hour removing the old one. Luckily Appliance Parts Pros had a good diagram of the part plus online help showed were it was located on my particular stacked GE washer dryer. I purchased the part from Appliance Parts Pros and it arrived within a few days and was the OEM as they described. A very honest and dependable... Read more
Fix washer dancing or walking across the floor with this suspension rod assembly. Replaces worn rods that no longer cushion drum movement. Moderate DIY.
This shifter spring helps engage and return the transmission shifter mechanism in select top-load washers, allowing smooth changes between agitation and spin for reliable wash performance.
Fix a washer that won't spin or stops after a few seconds. This speed sensor regulates wash basket rotation for proper cleaning. Moderate difficulty repair.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.