Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gudz4essmww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Washer Tub And Basket Service Kit
Genuine Ge part
By: Ge
Part Number: WH45X24614

Complete service kit for washer tub and basket assembly. Replace when you notice leaks, unusual noise, or poor spin performance. Verify fit with your model.

Do-It-Yourself Stories from Customers like You Tub seal was compromised and water was leaking every where   James M. • Hermosa Beach , CA • October 08, 2018

We ordered the whole tub assembly from your company and installed it ourselves. Read more

More
$529.69

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Fabric Softener Dispenser Cap Funnel
Genuine Ge part
By: Ge
Part Number: WH03X27184

Fix fabric softener leaks and splashing with this dispenser cap funnel. Replaces cracked or missing caps to restore proper dispensing during rinse cycles.

More
$8.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Run Capacitor (Washer Motor)
Genuine Ge part
By: Ge
Part Number: WH12X10513

This washer motor run capacitor stores and releases electrical energy to help the drive motor start and run smoothly. Replacing a weak capacitor can help restore consistent agitation and spin and reduce motor humming or stalling under load.

  • Provides the phase shift and torque assist the drive motor needs to start and stay running
  • Can address: washer won't start, no agitate or spin, motor only hums/buzzes, or stops under load
  • Visible clues of failure can include a swollen, cracked, or leaking capacitor case
Includes: 1 run capacitor Install notes:
  • Unplug the appliance before servicing; capacitors can retain a charge even when power is off
  • Discharge the capacitor safely before handling
  • Note wire positions; move leads to the same terminals and secure the capacitor in the original bracket/orientation
  • Inspect connectors and replace any burnt or loose terminals to ensure a tight fit

Do-It-Yourself Stories from Customers like You Drum would not rotate intermittently.   Robert L. • Cary , NC • May 24, 2019

The Dryer is 10 years old GE Front Load DPVH890JEMG. The drum would intermittently not rotate at the beginning of a cycle and occasionally would rotate but then start and stop throughout the cycle. I did not check error codes, but the windings on the motor were black. So it seemed reasonable that the motor was overheating and sending a signal to the control board to stop. There is one screw under the knob and 9 screws on the front to get inside. I decided to replace the bearings, capacitor,... Read more

More
$37.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Dryer Trap Duct And Felt Kit
Genuine Ge part
By: Ge
Part Number: WE02X25500

Restores the dryer's front airflow path and drum seal. Replace if the duct is damaged, cracked, or the felt seal is worn, compressed, or missing.

Do-It-Yourself Stories from Customers like You Dryer noisy and snagging clothes.   Larry S. • Millsboro , DE • June 20, 2020

I replaced the KIT TRAP DUCT AND FELT (WE02X25500) and Dryer Bearing Kit (WE49X20697). That took care of the issues with the dryer. Read more

More
$105.74

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Dryer Combo Control Board Assembly
Genuine Ge part
By: Ge
Part Number: WH12X22744

Fix washer not draining, unresponsive controls, or cycle issues. This control board manages timing, sensors, and displays. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You The washer was not draining.   Iraj R. • Potomac , MD • October 19, 2021

I changed the circuit board. Read more

More
$398.23

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Agitator Assembly
Genuine Ge part
By: Ge
Part Number: WH43X10056

Washer not cleaning clothes properly? This agitator assembly creates the wash action that moves laundry through water. Moderately difficult replacement.

More
$108.40

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Kit Gas Conversion 24"
Genuine Ge part
By: Ge
Part Number: WE25M73

 

More
$131.69

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Tub Cover Asm
Genuine Ge part
By: Ge
Part Number: WH44X27617

The Tub Cover Assembly is an OEM part for GE top-load washing machines. It covers and protects the agitator and inner tub inside the washer.

Causes of a bad tub cover can include damage such as cracks or ruptures over time from repeated use, or warping due to exposure to high heat or moisture. 

Symptoms of a defective tub cover assembly include:

  • Water leaks inside or outside the washer during operation  
  • Increased noise levels from an unsecured or poorly fitted cover
  • Inability to fully close or lock the washer door or lid

This genuine GE replacement is also compatible with Hotpoint, RCA, and select Kenmore units. 

More
$45.50

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Gearcase Assembly
Genuine Ge part
By: Ge
Part Number: WH49X22795

This is the transmission or gearcase assembly that drives the washer's agitator and spin basket. It converts motor rotation into the agitation and spin cycles needed to wash and extract water from clothes. Replace this assembly if the washer makes loud grinding noises during agitation, fails to spin properly, or leaks oil from beneath the tub.

More
$173.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Motor And Pulley Kit
Genuine Ge part
By: Ge
Part Number: WH49X27318

Washer won't spin or agitate? This motor and pulley kit restores drum rotation. Requires socket set. Moderate difficulty repair for laundry centers.

More
$184.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Cup Funnel (Fabric Softener Dispenser)
Genuine Ge part
By: Ge
Part Number: WH03X27183

This cup funnel sits inside the fabric softener dispenser and channels softener into the wash basket during the rinse. Replacing a damaged or missing funnel helps stop leaks and ensures the softener empties as designed.

  • Directs fabric softener from the dispenser cup into the washer tub during the rinse cycle
  • Helps prevent spills and residue around the dispenser area
  • Restores proper flow through the softener cup for consistent dispensing
  • Common signs of failure: softener remains in the cup, slow or no dispensing, overflow/leaks, or a cracked/missing funnel
What's included: 1 cup funnel Install notes:
  • Disconnect power and turn off water supply before servicing
  • Remove the fabric softener dispenser cap/cup per your model's instructions
  • Lift out the old funnel; clean the seat, then fully press the new funnel into place, aligning any tabs
  • Reinstall the dispenser components and run a rinse cycle to flow

More
$7.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Water Inlet Valve Assembly
Genuine Ge part
By: Ge
Part Number: WH13X27418

Fix no water fill or slow filling in your laundry center with this water inlet valve assembly. Controls water flow to washer tub and dispenser.

More
$25.48

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Valve And Burner Assembly
Genuine Ge part
By: Ge
Part Number: WE03X27426

The Valve and Burner Assembly is an OEM part for GE dryers. As an integrated sub-assembly, it includes gas control valves, pilot components, and the main burner.  

Working together as a system, this assembly regulates gas flow to the heating elements. It provides consistent thermal output throughout drying cycles under control board direction.

Causes of failure can include normal wear over extended use. Mineral or debris buildup may also interfere with proper functioning over time. 

Symptoms of a faulty assembly comprise:  

  • Inability to properly ignite or maintain burner flames
  • Fluctuations in heating element output impacting dry times  
  • Potential gas leaks or unsafe unburned gas emissions
  • Issues fully completing designated drying cycles

This genuine GE replacement assembly ensures all gas components function reliably once more. Compatible with some Hotpoint, RCA, and select Kenmore models too, safety and performance are restored through precise thermal regulation.

More
$279.36

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Laundry Center Heating Element
Genuine Ge part
By: Ge
Part Number: WE11M61

Dryer not heating or taking too long to dry? This heating element generates heat to dry clothes. Common repair for no heat issues in laundry centers.

More
$247.23

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Safety Thermostat (Gas Dryer)
Genuine Ge part
By: Ge
Part Number: WE4M529

This safety thermostat is a temperature-sensitive cutoff for gas dryers. It monitors heat at the burner housing and opens the circuit if temperatures rise too high, helping protect the appliance and restore safe, reliable heating performance.

  • Monitors burner/heater housing temperature to prevent overheating
  • Opens the heat circuit when an over-temperature condition occurs
  • Common symptoms: no heat, burner won't ignite or stay lit, heat shuts off too soon, long dry times
  • Overheating or failure is often caused by restricted airflow; check venting and lint buildup
Install notes:
  • Disconnect power and shut off gas supply before servicing
  • Access the thermostat on the burner/heater housing; transfer wires one at a time and mount flush using the original hardware
  • Do not overtighten; ensure firm metal-to-metal contact for accurate sensing
  • After repair, clear lint and verify strong airflow at the exterior vent to prevent repeat issues

More
$34.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Spring Cover
Genuine Ge part
By: Ge
Part Number: WH01X10628

This spring cover protects and retains a mechanism spring inside your washer. Replacing a cracked or missing cover helps keep the spring seated, limits debris intrusion, and supports smooth, reliable movement of the associated control, latch, or linkage.

  • Shields the spring and helps keep it properly seated in its pocket
  • Reduces friction and wear that can lead to premature spring failure
  • Supports consistent return action for the related control, latch, or lever
  • Typical symptoms include a missing/broken cover, exposed spring, rattling, or erratic operation
What's included: Spring cover
  • Unplug the appliance and turn off water before servicing
  • Access point varies by model; photograph spring/cover orientation before removal
  • Control the spring during disassembly to prevent sudden release
  • Ensure the cover is fully seated; test operation before final reassembly

More
$12.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google