Gwe19jslnfss Parts

The Bypass Filter Plug is an OEM part for GE refrigerators. It is used when a water filter is not installed. The bypass plug is essential for maintaining the refrigerator's water flow system, allowing water to bypass the filtration process. This is particularly useful during times when a replacement water filter is not immediately available or in situations where the household water supply is already adequately purified and additional filtration is not necessary.

Common causes of issues with the bypass filter plug include physical damage from handling, wear and tear over time, or improper installation. A faulty bypass filter plug can disrupt the water flow and affect the performance of the water dispenser and ice maker.

Symptoms of a bad Bypass Filter Plug include:

• Leakage or dripping from the water dispenser area.
• Difficulty in installing or removing the plug from the filter housing.
• Decreased water flow rate through the dispenser, indicating a potential blockage or improper fit.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Defrost Heater Assembly is an OEM replacement part for GE refrigerators. It contains the heating element responsible for maintaining optimal temperatures within the refrigerator. As a crucial component, the heater works to keep stored food safely cooled and prevent freezing.

Causes of a bad defrost heater can include gradual wear over time, mineral buildup reducing heat transfer efficiency, and physical damage. 

Symptoms of failure are:

• Fluctuating temperatures inside the fridge
• Food spoiling more quickly 
• Compressor running excessively 
• Error codes indicating heating issues

This GE OEM part is also compatible with Hotpoint, RCA, and Kenmore models for simple cross-referencing.

This genuine OEM door handle kit manufactured by General Electric is intended to replace broken or detached door handles on refrigerators. This kit contains three handles.The door handles on the refrigerator can become broken over time, often due to bending, denting, corroding, or otherwise becoming detached. In such cases, the user may not be able to efficiently open or close the refrigerator doors. This replacement can be completed with standard household tools.This OEM part is sourced from the manufacturer and is compatible with refrigerators from General Electric, Hotpoint, RCA, and other brands. This part has been made from high-quality, durable, non-corrosive metal and is only sold individually.

This main control board is the refrigerator's central control, coordinating cooling, defrost, fans, and lights. Replacing a failed board can restore stable temperatures and proper operation when electronic faults prevent the unit from cooling correctly.

• Regulates compressor and fan operation to maintain set temperatures; failure may cause no cooling, warm sections, or constant running
• Controls automatic defrost timing; faults can lead to frost buildup and restricted airflow
• Distributes power and signals to sensors, lights, valves, and fans; issues may present as unresponsive controls or error codes
• Coordinates ice maker and dispenser logic on applicable models; failures may leave ice/water functions inoperative

• Disconnect power before servicing; use ESD precautions and handle the board by the edges
• Access the board behind the rear service panel; photograph wire/connector locations for reference
• Move connectors one at a time to the new board; secure the board and reinstall the cover
• Restore power and allow up to 24 hours for temperatures to stabilize

The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.

Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.

Symptoms of a bad Temperature Sensor Seal include:

• Inaccurate temperature readings.
• Condensation or frost near the sensor location.
• Frequent cycling or unusual patterns in the refrigerator's cooling process.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Tube is an OEM part for GE refrigerators. It is responsible for directing defrost water to the drain pan located beneath the appliance, where it can evaporate safely. 

Causes of a bad drain tube can include blockages from debris or ice, physical damage such as cracks or splits that allow water leakage, or a disconnection from its fitting points due to improper installation or material fatigue.

Symptoms of a bad Drain Tube include:

• Water pooling at the bottom of the refrigerator compartment
• Ice accumulation in or around the freezer area
• Leakage of water onto the kitchen floor beneath the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This compressor start device attaches to the compressor to help it start and protect it from overheating. Replacing a failed device can help restore reliable compressor starts and consistent cooling.

• Provides the initial boost to start the compressor, then disengages
• Protects the compressor by opening the circuit on overcurrent/overheat
• Common symptoms of failure: compressor won't start, repeated clicking or buzzing from the rear, warm temperatures, short cycling
• Often shows heat damage or a burnt odor at the connector when failed

• Disconnect power and remove the rear access panel to reach the compressor
• Note wire locations and compressor pin orientation; take a photo before removal
• Push the device straight onto the compressor terminals until fully seated; replace any burnt connectors
• Restore power and verify smooth compressor start without repeated clicking

The Temperature Sensor Grille is an OEM part for GE refrigerators. This grille covers and protects the temperature sensor, ensuring it accurately measures the internal temperature of the refrigerator.  

Causes of a bad grille can include physical damage from impacts, regular wear and tear, or the buildup of dust and debris that can obstruct airflow.  

Symptoms of a bad temperature sensor grille include:

• Inaccurate temperature readings
• The refrigerator running continuously or not cooling properly
• Visible damage or obstruction on the grille
• The sensor becoming loose or dislodged

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Freezer Drawer Gasket is an OEM part for GE refrigerators. This part is responsible for creating an airtight seal between the freezer door and the freezer compartment, preventing cold air from escaping the freezer, while also preventing warm air from entering. It helps maintain consistent temperatures inside the freezer, keeping your frozen foods fresh and preserved for longer.

A bad freezer drawer gasket can occur due to wear and tear, damage, or other factors. If you notice symptoms such as frost buildup, excessive condensation, or a decrease in freezer efficiency, it may be time to replace the gasket.

Symptoms of a bad freezer drawer gasket include:

• Frost buildup inside the freezer
• Excessive condensation on the gasket or freezer walls
• Decreased freezer efficiency

Restore your refrigerator's freezer drawer by replacing the faulty gasket with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This fan-mount grommet fits the evaporator or condenser fan assembly to isolate vibration and keep the motor aligned. Replacing a worn grommet can quiet rattles and prevent the fan blade from rubbing the housing. What it does:

• Isolates the fan motor from its bracket to reduce vibration and operating noise
• Helps maintain proper fan motor and blade alignment/clearance
• Replaces cracked, flattened, hardened, or missing grommets
• Typical symptoms: rattling, buzzing, or vibration sounds from the freezer or rear machine compartment

• 1 fan motor grommet

• Disconnect power before servicing; pull the refrigerator forward for rear access if needed
• Evaporator fan: remove the freezer's rear panel; condenser fan: remove the rear service panel
• Support the motor, remove the fan blade and mounting hardware as needed, replace the grommet, and reassemble
• Ensure the fan spins freely and does not contact the shroud before restoring power

This shelf support is the small rear rail clip that secures a refrigerator shelf or drawer rail in place. A worn or broken support can let the shelf tilt or drop, making storage unstable.

• Holds the rear of the shelf or rail securely to the cabinet wall
• Helps correct issues like a sagging, tilting, or loose shelf
• Replaces cracked, missing, or deformed supports causing poor fit
• Restores proper alignment so bins and shelves slide/seat correctly

• Unplug refrigerator before service
• Remove the shelf/bin to access the support
• Depress locking tabs and slide the old support out; snap the new one into the cabinet slot
• Ensure it's fully seated before reinstalling the shelf

The Tube Lead is an OEM part for GE refrigerators. It is responsible for routing water through the unit.

Causes of a bad tube lead can include mineral accumulation restricting flow, loosened compression fittings, or cracked/split tubing exposing water to air.

Symptoms of an issue with the water line tube lead include:

• Slow or inconsistent water and ice production
• Water pressure or temperature fluctuations at the dispenser
• Leaks in the refrigerator's exterior bottom panel

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator door gasket replaces a worn or damaged door seal to restore a tight closure. A proper seal helps keep cold air in, reduce moisture and frost, and maintain consistent temperatures for better food preservation.

• Forms an airtight seal between the door and cabinet to contain cold air
• Helps maintain stable internal temperatures and efficiency
• Can reduce condensation or frost around the door opening
• Helps with symptoms like a door not sealing, gaps, or warm spots inside

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Remove the old gasket and clean the door channel and mating surfaces
• Warm the new gasket in hot water to relax bends; press fully into the door channel starting at the corners
• After installation, ensure even contact all around; use low, controlled heat only if needed to smooth waves, and avoid overheating plastics

The Overload PTCR Combo is an OEM part for GE refrigerators. This assembly includes both the start relay and the overload. The start relay is responsible for providing an extra boost of power to kick-start the compressor, while the overload acts as a safety mechanism to protect the compressor from electrical overload. Together, they help maintain cooling and prevent damage to the compressor.

A bad start relay and overload combo can occur due to electrical malfunctions or wear and tear over time. If you notice symptoms such as the refrigerator not cooling properly, unusual noises coming from the compressor, or the compressor not starting at all, it may be time to replace the combo.

Symptoms of a bad start relay and overload combo include:

• Inadequate cooling in the refrigerator
• Unusual noises coming from the compressor
• Failure of the compressor to start

Restore the proper function of your GE refrigerator's compressor by replacing the faulty start relay and overload combo with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Manifold & Housing are OEM components specifically designed for GE refrigerators. This part includes both the manifold which distributes water and the outer housing that protects it. 

The manifold & housing work together to deliver filtered water to the refrigerator's dispenser and ice maker. It is responsible for efficiently directing water flow and ensuring reliable operation of components that require water. 

Symptoms of a bad manifold & housing include:

• Low water pressure at the dispenser 
• Streaking or staining around water line connections
• Ice maker or dispenser malfunctions due to lack of water
• Dripping or leaks from manifold or housing areas

This OEM GE part is specifically designed to fit your model fridge. It is also compatible with Hotpoint, RCA, and some Kenmore models for a factory fit and like-new performance.
 

The Damper Assembly is an OEM component specifically designed for GE refrigerators. This assembly is located within the fresh food compartment and functions to control airflow and temperature regulation. 

The damper works with the evaporator fan to carefully moderate circulating air, preventing cold spots and optimizing equal cooling. Consistent temperatures extend the shelf life of perishable goods. 

Causes of a faulty damper assembly can include failure of the plastic gears or axle that coordinate its movements over time. Improper air circulation disrupts the refrigerator's performance.

Symptoms include: 

• Formation of frost or ice buildup in problem areas  
• Inconsistent shelf temperatures from top to bottom
• Foods spoiling more quickly 

This replacement assembly from GE restores dependable temperature control. Upgrade today for continued fresh food preservation abilities matching OEM standards. It is also compatible with Hotpoint, RCA, and some Kenmore models.