Hbl8750/Uc12 Parts

Replace a cracked or missing shelf and restore a flat, easy-to-clean storage surface inside your refrigerator. This glass shelf fits the designated location in your unit to keep food level, visible, and organized. What it does:

• Provides a flat, stable storage surface inside the fresh food compartment
• Restores capacity when a shelf is broken or missing
• Helps prevent spills and tipping caused by uneven or sagging shelves
• Common signs: cracked/shattered glass, broken edge tabs, shelf won't seat securely, reduced storage space

• 1 refrigerator shelf

• Remove food items; carefully slide the old shelf straight out
• Handle glass with both hands; wear cut-resistant gloves
• Align front/rear edges with the side rails or locator tabs and push straight in until fully seated
• Do not force the shelf; re-align if it binds to avoid damage

This control module is the appliance's main electronic control board. It interprets inputs and energizes components to run the correct sequences, restoring reliable operation when the original board is unresponsive, intermittent, or damaged. What it does

• Coordinates timing and operation of motors, valves, heaters, and other loads
• Monitors inputs from switches and sensors to make decisions
• Distributes power and controls relays/outputs to components
• Common failure symptoms: won't start, controls unresponsive or erratic, stops mid-cycle, or shows error codes

• 1 control module

• Disconnect power before servicing; electronic boards can carry residual charge
• Use ESD precautions; handle the board by the edges and avoid touching components
• Document wiring; move connectors one at a time and ensure they are fully seated and keyed correctly
• Secure the board and any ground straps; reassemble, restore power, and run the model's service/diagnostic test if applicable

This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.

A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging. 

Symptoms of a defective Terminal Box may include:

• Inconsistent power supply to the oven
• Non-functional heating elements
• Sparks or electrical arcing within the terminal box area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This factory fixing kit provides the mounting hardware needed to secure the applicable component or panel on your appliance. Replacing worn or missing fasteners restores proper alignment and a solid, rattle-free installation.

• Secures panels, brackets, or trim to the appliance chassis or door
• Helps prevent shifting, vibration, and rattling during operation
• Restores correct alignment and fit when hardware is missing or stripped
• Useful during initial installation or when re-installing serviced parts

• Disconnect electrical power; if your appliance is plumbed, shut off water before servicing
• Follow your model's installation/service instructions for exact hardware locations and orientation
• Tighten hardware evenly; do not overtighten to avoid damaging plastic or sheet metal
• Verify alignment and smooth operation before restoring power and/or water

This door latch secures the appliance door and helps enable normal operation by keeping the door closed and latched during cycles. Replacing a worn or broken latch restores proper door engagement and reliable start/lock behavior. What it does:

• Secures the door closed so the appliance can run and complete cycles
• Engages with the strike to maintain a tight, consistent seal during operation
• Helps the control detect a closed/locked door and permit cycle start
• Commonly replaced when the door won't stay closed, won't lock, or the unit won't start

• One replacement door latch

• Disconnect power and water before beginning any repair
• Access may require removing the inner door panel or front trim—keep fasteners organized
• Verify alignment of the latch and strike before reassembly to ensure proper engagement
• If the latch has electrical connectors, reconnect securely and avoid pinching wires

This heating element restores proper water temperature and drying performance in your dishwasher. When the original fails, cycles may run long and dishes can come out wet; replacing it brings back consistent, efficient cleaning results. What it does:

• Heats wash and rinse water to help dissolve detergent and remove soils
• Raises final rinse temperature to improve drying performance
• Works with the control and sensors to maintain target temperatures
• Common symptoms include water not heating, poor drying, extended cycles, or a heating-related fault

• 1 heating element

• Disconnect power at the breaker and shut off water before servicing
• Pull the dishwasher and/or remove the toe panel as needed to access the heater wiring and mounts
• Note wire positions and make secure, clean terminal connections
• After reassembly, run a test cycle and inspect for leaks and proper heating

This replacement cover protects internal components and restores the proper fit and finish of the original assembly. It secures nearby parts and helps prevent debris from entering sensitive areas. What it does:

• Covers and shields internal components from dirt and loose debris
• Secures the assembly and helps reduce vibration or rattling
• Replaces cracked, broken or missing covers that cause poor fit or unsecured parts
• Restores original appearance where the factory cover is damaged or lost

• Power off and unplug the appliance (or shut off circuit) before starting work
• Remove necessary access panels or screws to reach the cover; retain hardware for reassembly
• Align cover before fastening; do not force or over-tighten screws to avoid damage

This socket is an electrical connector used to join wiring or plug-in components, restoring a secure connection for reliable appliance operation. It replaces a worn or damaged socket to help prevent intermittent power or component failure. What it does:

• Provides a secure electrical connection between wiring and the appliance component
• Restores proper contact when a loose, corroded, or broken socket causes intermittent operation
• Helps prevent arcing or poor connections that can lead to component failure
• Used where a plug-in or push-fit electrical connection is required

• One socket

• Disconnect power to the appliance before inspecting or replacing the socket
• Replace only with the exact socket type specified for your appliance

Replacement incandescent interior oven lamp that restores cooking-cavity illumination so you can check food without opening the door. Direct-fit replacement sold individually for compatible appliances. What it does:

• Restores interior oven lighting so you can monitor cooking without opening the door
• Replaces a burned-out or flickering bulb to eliminate dark or partially lit oven interiors
• Helps diagnose whether lack of light is due to the bulb
• Fits behind the oven light cover and provides general illumination of the cavity

• Turn off power and allow the oven to cool completely before replacing the lamp
• Remove the oven light cover or shield per your appliance instructions before swapping the bulb
• Avoid touching the glass with bare hands; use a clean cloth or gloves to prevent oils on the bulb
• Reinstall the cover securely and test the lamp; if it still does not light, check the fixture and power

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This halogen oven lamp provides bright, consistent interior lighting so you can easily check cooking progress without opening the door. It replaces a burned or dim oven bulb to restore full interior visibility. What it does:

• Illuminates the oven cavity for clear viewing of food during cooking and baking
• Replaces a burned-out or flickering oven lamp
• Helps you monitor doneness without repeatedly opening the oven door
• Fits into the oven lamp socket and powers with the oven's existing lighting circuit

• Disconnect power to the appliance before servicing to avoid shock
• Allow the oven to cool completely before replacing the lamp
• Avoid touching the bulb glass with bare fingers; use gloves or a clean cloth to prevent oil deposits that can shorten bulb life

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This metal mounting bracket secures internal components and panels to restore proper alignment and reduce rattling. It's a straightforward replacement part that helps keep appliance panels and assemblies firmly in place for reliable operation. What it does:

• Provides a secure attachment point for panels or internal assemblies to prevent movement and vibration
• Helps correct alignment issues that can cause rubbing, gaps, or noise
• Restores the original fit where a bent, cracked, or missing bracket caused loose parts
• Works with the appliance's existing fasteners and mounting points

• Remove power and, if applicable, disconnect the appliance from water before beginning work
• Use the factory fasteners or OEM replacement screws to secure the bracket in the original location
• Verify alignment of the attached panel or assembly before fully tightening fasteners

This cap is a direct-fit replacement closure used to protect and seal an exposed opening or component on compatible Bosch appliances, preventing dirt, moisture and damage for reliable operation. What it does:

• Covers and seals an exposed port or fastener to keep contaminants out
• Protects internal components from moisture and debris that can cause malfunctions
• Replaces cracked, warped or missing caps that allow leaks or debris intrusion
• Restores proper fit and appearance where a damaged cap leaves an opening

• Disconnect appliance power and water supply before starting any repair
• Verify the cap matches the damaged/original part before installation
• Press or snap the cap into place until fully seated; do not force or pry
• Inspect mating surfaces for damage or debris and clean before installing