Hblp451 Parts

The Heating Element is an OEM replacement part for Bosch electric wall ovens and ranges. It is responsible for providing precise heat control to oven cavities and cooking elements. 

Symptoms of an inadequate heating element include:

• Inability to reach or maintain proper oven temperatures  
• Fluctuating temperature readings inside oven cavities
• Slow or inadequate heating of elements for cooking 

Causes can be normal wear and tear after extended use. Exposure to splatters or residue over time may also reduce heating performance.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore wall ovens.

Fix oven overheating or temperature regulation issues with this temperature sensor. Common repair for wall ovens and ranges that won't heat accurately.

This shelf restores a level, secure storage surface inside your refrigerator. Replacing a broken or missing shelf helps keep items organized and maximizes usable space for everyday food storage. What it does:

• Provides a stable, flat surface to support food containers in the compartment
• Helps organize contents and optimize storage layout
• Replace if cracked, shattered, bowed, missing, or not seating correctly on its supports
• Symptoms of failure include instability, sagging, or frequent spills from uneven support

• One shelf

• Disconnect power before servicing
• Remove items, then lift and slide the old shelf out per your model's design
• Transfer any reusable trim or rails from the original shelf
• Ensure the new shelf is fully seated on its supports before loading

The Heating Element Oven is an OEM part compatible with Frigidaire and Electrolux wall ovens and ranges. It generates targeted heat through accurate temperature coils to provide consistent, reliable baking and broiling. The oven element ensures warm, golden finishes for any recipe.

Causes of a damaged element include mineral buildup impeding heat transfer. Physical bending or cracking of fragile coils can occur from accidental impact over years of use.

Symptoms of a failed element are:

• Uneven or insufficient heat for cooking/baking 
• Extended preheat or cook times to reach temperatures
• Hot and cold spots within the oven cavity
• Complete lack of heat requiring replacement

Replacing with this genuine OEM part restores optimal performance. Compatible with Kenmore, Gibson, and some Admiral wall ovens.
 

This dishwasher water sensor monitors wash-water conditions so the control can adjust cycle time, rinses, and heating for consistent performance. Replace a failed sensor to restore reliable cleaning results and proper automatic cycle adjustments. What it does

• Detects water conditions during the wash cycle and reports to the control
• Helps the dishwasher optimize cycle length, rinses, and energy use
• Common symptoms: unusually long or short cycles, inconsistent cleaning, or sensor-related error messages
• Trigger erratic cycle behavior when the sensor is faulty or contaminated

• One sensor assembly

• Disconnect power and turn off water before servicing
• Access is typically from the underside; place a towel or pan to catch residual water
• Transfer/seat the seal properly if present; fully engage the locking tabs and reconnect the harness
• After installation, run a quick cycle and check for leaks and proper operation

Oven won't heat after self-clean cycle? A failed temperature limiter (high-limit thermostat) cuts power to protect against overheating. Direct fix.

The Outer Door Panel is an OEM part for Bosch range doors. Crafted from durable stainless steel, it protects the inner workings of the oven door while providing an elegant and smooth surface for users.

Symptoms of a bad outer door panel include:

• Aesthetic issues like dents, scratches, or rusting of the surface
• Warping or sagging of the panel  
• Gaps or misalignment that compromise the door seal
• Looseness or inability to properly close the door

Causes of failure may include normal wear and tear over time from daily use or accidental impacts and dents. Exposure to heat could cause warping. 

Replacing this genuine Bosch OEM part restores the pristine look and feel of the oven door. Compatible with 300 series gas and electric range models, it ensures safe and reliable performance. This replacement panel is also compatible with Thermador and Gaggenau ranges.
 

Uneven baking or slow heating in convection mode? A failed convection fan motor stops hot air circulation. Moderate DIY repair restores even cooking.

This replacement refrigerator shelf restores a stable, level surface for storing food and beverages. Swap in a new shelf to recover lost space, keep items organized, and reduce spills caused by a damaged or missing shelf.

• Provides a sturdy surface to support containers and organize contents
• Fits into the factory shelf rails for a secure, level placement
• Helps improve visibility and access to items inside the compartment
• Common symptoms: cracked or broken shelf, won't sit level, missing shelf, items tipping or spilling

What's included: 1 shelf Install notes:

• Remove food from the area and lift the old shelf straight out of the side rails
• Wear cut-resistant gloves and handle edges carefully to avoid damage
• Align with the rails and slide/set the new shelf fully into position—do not force
• Reseat and check for obstructions in the rails

Oven overheats or shows E115 error? The temperature limiter (safety thermostat) may have failed. Moderate difficulty repair requiring careful disassembly.

Oven not heating evenly or baking properly? This heating element restores consistent heat distribution. DIY-friendly repair with basic tools.

This is the evaporator fan motor and blade assembly that circulates cold air across the evaporator and throughout the fresh food and freezer compartments for even cooling and proper temperature control.

• Draws air across the evaporator coils and distributes chilled air to all sections
• Helps prevent warm spots, frost build-up, and temperature swings
• Common failure symptoms: unusual fan noise, intermittent or no airflow, rising temperatures, or frost accumulating on the evaporator cover
• Located in the evaporator compartment; runs during cooling cycles

• Disconnect power before servicing; wear cut-resistant gloves
• Access is typically from the rear of the freezer/evaporator cover; remove shelves and panels as needed
• Note wire orientation and mounting before removal; transfer grommets/brackets if applicable
• After installation, verify unobstructed fan spin and restore power to test operation

This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.

A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging. 

Symptoms of a defective Terminal Box may include:

• Inconsistent power supply to the oven
• Non-functional heating elements
• Sparks or electrical arcing within the terminal box area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Cushioning spacer that prevents metal-on-metal contact in ranges and wall ovens. Replace if worn, cracked, or missing to reduce noise and wear.

Oven door won't latch or stays locked? This door latch secures your oven door during cooking and prevents accidental openings. Moderate DIY repair.

Blank or flickering oven display? This display module restores the control panel readout so you can see settings and alerts. Moderate DIY repair.