Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dispenser won't close or stay shut? This dishwasher detergent cup cover securely latches to prevent mid-cycle opening. Moderate DIY repair, 1 hour.
Although I ordered the latch, lever and a new cup and replace the original pieces the dispenser still did not close. On further inspection it turned out to be a small spring that had fallen out of place. Once the spring was reconnected the dispensing cover worked fine. I'm still happy that I replaced the entire assembly with new parts regardless. Discovering the loose spring took the most time. Read more
Dishwasher leaking from the bottom? A cracked or worn inlet sump causes water leaks during wash cycles. Moderately difficult repair with video guidance.
Replaced with a new Inlet Sump [WD18X213]. It was a little tedious, attaching the Inlet Sump, back to the pump, because I did the job with the dishwasher in place (not pulled out). My dishwasher was plumbed with copper pipe, so I really didn't want to upset that. Also, I had previously replaced the motor and the pump in this dishwasher, so I was familiar with how the Inlet Sump attached to the pump. Again, it's very tight working under the unit while it is still in place, and I wouldn't... Read more
Dishes not drying or wet after cycle? The heating element heats air during drying. Simple DIY repair with video guide, typically under 30 minutes.
Replaced heating element. Read more
Fix a dishwasher that won't drain or drains constantly during wash cycles. This drain solenoid valve controls water drainage timing. Moderate DIY repair.
Took the washer out, turned it over and found the solenoid that worked the drain valve to be melted, and the shaft that the solenoid activates was heavily corroded. I found the right parts on your website after reading the notes left by other customers, then watched the video. The repairs were fairly simple and successful. This was a GE profile dishwasher. Read more
Replacement slide rail for dishwasher upper rack. Installs on cabinet wall to guide rack in and out. Needed when original is bent, twisted, or broken.
Dishwasher needed new wheel that mounted to upper rack.There are 4 total that make the rack roll in and out. Replaced both side rails and rail caps (4- only 50 cents each) along with new upper rack that came with wheels installed. One side rail was bent so decided to spend a little extra and replace both. Might of been able to replace just one broken rack wheel but rack was old and was rusting in some areas so decided to just replace it. Read more
Fixes spotty dishes and rinse aid leaks. This reservoir holds and releases rinse agent during the final cycle. Quick DIY repair with video guide.
Repair parts arrived super fast. Installed the new parts according to the supplied instructions. All went well. It took over 2 hours because the unit had to be removed after the water and power were disconnected and then the initial problem diagnosed (motor brushes worn beyond service limits). The removal of the spray bar tower assembly was a challenge until it was discovered that the tower unscrews in a CW direction from the bar that then allowed access to the attachment screw that holds that... Read more
This adjustable leg allows you to level your dishwasher and adjust its height for proper installation under countertops. It supports the dishwasher's weight while providing stability during operation. Replace this part if your dishwasher rocks during cycles, isn't level, or if the existing leg is stripped or broken.
After reading all the systems on this site. It made it pretty easy to diagnose the problem. The part came in and slapped it in within a few minutes. Ran it and made my wife happy. She was under undue stress without her dishwasher and now I am her superman! Will order again from you. Part arrived quickly and the info you provided really saved me a ton of money! Seriously thank you. Read more
Includes screws.
Replace all 8 of them with the ordered parts. No big deal. Your provided repair-video was a big help! Thanks! Read more
Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.
The video was very helpful. the hardest part is getting off old rusted parts. I had to use a hacksaw to remove one of the old clamps. I had to open the bottom of the washing machine to remove of the other clamp. Putting the new parts on was easy. Getting everything apart was a challenge. Putting the new parts on was an easy 5 minute job. Read more
Protective cover that sits over your dishwasher's pump inlet to screen debris. Replace if cracked, broken, or missing to protect internal components.
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more
Fix dishwasher overflows or underfilling with a new water level float. This part regulates filling by rising with water to signal the switch.
Replaces broken or cracked 3rd level spray arm assembly that mounts at the top of the tub. Includes mounting tabs and collar for secure installation.
There is a plastic "snapping" feature (Two plastic tabs that when pressed together can fit into the holes on the spray arm. Once in there, the tabs expands and keep the spray arm in place) that comes out of the top onto which the spray arm is attached to. That plastic piece broke and the spray arm fell off. It wasn't clear how the snapping feature was attached to the top of the dishwasher at first. I was looking for a replacement for it and could not find it on any of the assembly diagram... Read more
This spring kit restores proper door tension so the appliance door opens and closes smoothly and stays in position. Use it to replace worn or broken springs that cause a sagging, loose, or hard-to-operate door. What it does:
Replacement door vent directs humid air out during the dry cycle. Install inside the door panel to replace a cracked, clogged, or missing vent.
Found AppliancePartsPros.com and looked up parts and ordered replacement parts. ( VERY easy!) Replaced the spray arm assembly and door vent via the handy Q&A repair section, as well as a thorough cleaning, and VOILA! Clean dishes again!! Thanks for making it easy! Read more
Secures dishwasher sump to tub, maintaining seal compression to prevent leaks. Replace if corroded or weak. Confirm fit with your model number.
Took the impeller out, removed the pump, replaced connector, put new clamps on, reassembled and checked for leaks. I just followed Arts video, went smooth. Wifes happy, things are good. Thanks AppliancePartsPros.com Read more
This float stem is part of the dishwasher's water-level/overfill system. It guides the tub float and actuates the float switch so the unit fills correctly and shuts off on time. Replace a worn or broken stem to restore reliable fill protection.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.