Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces cracked or broken ice dispenser bucket in side-by-side refrigerators. Holds ice supply and feeds dispenser chute. Essential when damaged.
Watched your how to video. Ordered the parts and replaced them. Read more
Bushing that lines the upper hinge pin on refrigerator doors. Replace if cracked, worn, or missing to restore smooth door swing and proper alignment.
Replaced upper and lower thimble's, lever arm, cam closure. Door stop was not the problem, but ordered it and replaced it too. The door of course has to come off, remove the top hinge, and lift it away. Lubricated moving parts with silicone spray. Be sure and put the door back in the open position, so the lever arm and cam closure can properly interact, then close the door. Remove the plastic grate at the bottom to get at the lever arm. Presto. Problem gone. Don't put excessive weight... Read more
Refrigerator too cold or freezing food? The damper cover assembly controls airflow between compartments. Common DIY repair restores proper temperature.
Replaced the damper assembly at the top of the fridge compartment. Read more
Replaces worn freezer door gasket to restore airtight seal. Replace when cold air escapes or frost forms around door edges. Confirm fit by model number.
Replaced old one. Read more
If your freezer is warm or you hear howling fan noise, the evaporator fan motor may need replacement. Moderate DIY repair taking 2-3 hours to restore cooling.
Replaced the evaporator fan motor. On line video did a good job showing how to remove and install the motor. It took about 2 hours to remove, 3 days to recieve the new part and 3 hours to put it in. Plugged in the refrigerator and looked at the freezer temp the next morning and the thermometer was at zero degrees F with good air flow. Refrigerato temperature is reading 40 degrees F. Read more
Slide-out freezer shelf restores storage capacity and organization. Replace if cracked, broken, or difficult to slide for smooth access to items.
Rubber grommet that mounts the evaporator or condenser fan motor to its bracket. Replace when worn, cracked, or missing to reduce vibration and noise.
Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more
White plastic clip that secures the rear of refrigerator shelves or drawer rails to the cabinet wall. Replace if cracked, broken, or missing.
I ordered my parts. It was a breeze thanks to appliancepartspros.com. I received the parts the next day. Installed them myself. Read more
This armature kit is the moving plunger and linkage operated by the dispenser solenoid. It opens and closes the ice chute door during dispensing and helps it seal when idle to reduce frost and warm-air leaks.
Replaced the water supply valve...boom! Read more
Fix a cracked or broken ice bucket glide that causes your bin to stick or misalign. This right-hand slide rail restores smooth drawer movement in 30 minutes.
It was very simple, took longer to unload freezer than to install glides Read more
The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.
Replaced springs, flapper assembly and ice door retainer as described in videos and it was easy. So far so good..water dispenses. Read more
Plastic water line that runs from the water valve to the icemaker fill tube. Replace if cracked, brittle, broken, or leaking at connection points.
Thanks to the AppliancePartsPro, I ordered it online and received it quickly. I even used the step by step directions on how to replace the tube from the AppliancePartsPro website. Just be very careful and review the instructions first. Couple of important things: 1. Take a picture of the existing wiring and tubes before you take them apart. 2. *if* you remove the wires ( red and white plugs) from the valve, make sure you plug them back in correctly. 3. Do not pull or push the tubes hard. Use... Read more
This screw is a genuine General Electric part, sold individually. This screw can be used as a replacement part for a refrigerator. A screw can suffer damage in the lifespan of a refrigerator. It can also be easily lost or misplaced. Screws are small parts and are usually installed in multiples to ensure components are reliably attached, so one screw loosening or going missing might not necessarily affect the operability of the refrigerator. However, if the components loosen or the screw suffers damage that strips the part, such as punctures or erosion to the metal material from general wear and tear or from a direct impact, the screw should be removed and replaced with this genuine OEM replacement part. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following appliance brands: General Electric, Hotpoint, RCA, and Americana.
I ordered the new slides for the shelves, the order came in a couple of days. All parts were there. The husband installed new slides and bearings in about 20 minutes with minimal effort. He said the hardest part was contorting his torso to be able to use the screwdriver. All good thank you. Read more
Fix a light that won't turn on or flickers in your refrigerator. This E12 socket replacement is straightforward with our step-by-step video guide.
When diagnosing the problem, I discovered that the ice door was not properly sealing and that the solenoid had appeared to rust/corrode forcing the door open. I replaced most of the ice dispenser internals (solenoid, crank, door, and spring) following the video. The door will now open when dispensing ice (which it does!), and will oddly stay open for a few seconds once I am finished, but does seal properly and the chute/container no longer frosts over. Read more
Seals the front edge of your refrigerator's crisper or pantry drawer pan cover to prevent cold air loss. Replace if worn, cracked, or not sealing properly.
First I ordered a new ice door seal, spring, and crank, figuring the condensation in freezer and door was caused by ice door not sealing. Turns out the solenoid for the ice door was completely rusted and was the primary cause, if it had been replaced early, it would have saved the dispenser board. What then happened was the moisture in the freezer door damaged the control board rendering dispenser controls inoperative as well as the heater around the dispenser. Now the freezer door is dripping... Read more
This ice bucket stores the ice your refrigerator's icemaker produces and keeps it organized and ready to use. Replace a cracked or missing bin to restore proper ice storage and help prevent spills, jams, and contamination.
Replaced the bucket with parts from Appliancepartspros.com. Perfect fit and wow was it delivered fast. Read more