Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement crisper drawer for storing vegetables and fruits in your refrigerator. Needed when original drawer is cracked, broken, or missing.
Ordered the proper parts with the help of appliance parts pros very quick shipment and fair pricing and the job is done. Thank you Read more
Clear lower crisper drawer for refrigerator vegetable storage. Replace your cracked, broken, or missing drawer to restore organized produce storage.
I ordered a replacement drawer on a Friday afternoon and it was was delivered Saturday morning less than 24 hours later. Read more
Fix a refrigerator that won't cool or clicks but doesn't start. This compressor start relay and overload protects against electrical issues. DIY-friendly.
WENT TO YOUTUBE FOUND OUT HOW TO TEST THE COMPRESSOR IT TESTED GOOD SINCE IT WAS NOT THE COMPRESSOR I ORDERED THE PARTS THAT WOULD MAKE IT WORK AGAIN - THE CAPACITOR & OVERLOAD PTCR COMBO I INSTALLED THE PARTS NOW I HAVE A FRIG. THAT'S WORKING AGAIN.AT A FRACTION OF THE COST TO REPAIR- THANK'S TO YOUTUBE. Read more
Secures and seals water line connections in your refrigerator's dispensing system. Replace if leaking or loose to prevent water damage. Confirm fit.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Replacement dairy compartment door for refrigerator door storage. Needed when original is cracked, broken, or missing. Installs in door compartment.
Ordered the part, came in a few days, lined up the holes and it popped right in. Read more
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.
Symptoms of a bad Lid Bumper include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more
Retaining bar for refrigerator door shelves. Keeps items secure when door opens and closes. Replace if cracked, broken, or missing. Simple install.
Ordered new parts from AppliancePartsPros.com Delivery in 2 days. Read more
Seals the gap between your refrigerator door and cabinet to prevent cool air from escaping. Replace if cracked, rotted, or no longer sealing properly.
Put in new one Read more
Fix noisy or squealing sounds from the back of your fridge with a new condenser fan motor. Typical DIY repair takes 8-10 minutes with basic tools.
Ordered a new Fan motor after referencing Model Number. Part was delivered in a timely matter. Unplugged Refrigerator from wall. Used a socket to remove bolts from. Cardboard access cover and also to remove Fan bracket to remove old fan and unclipped connector. Fan Blade and the two rubber grommets I reused on new replacement motor. Bolted new fan in place with Fan Blade and grommets seated. Then connected Fan connector, bolted access cover back on and plugged Refrigerator back in. Took... Read more
Freezer door gasket creates an airtight seal to prevent cool air loss and maintain temperature. Replace when torn, worn, or door won't close properly.
I replaced the gasket and have a technician lift the door back to the original position. Read more
Freezer fan loud or not spinning? This evaporator fan blade circulates cold air over the coils. DIY-friendly repair with our video guide.
I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble. Replaced the motor and fan and now it runs like a new unit. Read more
Bottom hinge pin secures the refrigerator door at the base, allowing smooth opening and closing. Replace if worn, damaged, missing, or door sags.
Replaced Hinge bracket, Hinge pin, and spacers, Read more
Refrigerator won't cool or compressor won't start? This compressor start relay and overload powers the compressor during cooling cycles. DIY repair.
We isolated a burning smell in our kitchen to our refrigerator, GE Profile PSS23MGTCCC which we purchased in November of 2006. This occurred at 3AM on 29 January 2015 and I am thankful that my wife got me up to investigate this odor. I unplugged the refrigerator. I plugged the refrigerator back in at 6AM thinking it had time to cool. The burning smell happened immediately and I unplugged the refrigerator again right away. My son in-law looked up some possible issues that could have... Read more
Ice overflowing freezer or ice maker won't shut off? Replace the missing or broken ice bucket. Installs in minutes, no tools required.
I ordered the bucket and it was on my door step the next afternoon, Read more
Fix a noisy or failing refrigerator with this condenser fan motor. Solves whining sounds, intermittent operation, and overheating. Moderate DIY repair.
After a lot of research on internet we thought it might be the condenser fan motor . we were a but confused as frig still working and cooling. I had imagined if motor gone bad it would just stop . However on taking back off frig we could see fan sometimes slowed and then began loud "animal " squeaking noise ! Although the back bottom of our fridge was relatively open it was very tricky to ease out fan and motor. Fortunately I had also ordered fan and grommet as fan was almost impossible to... Read more
Mounts the evaporator fan assembly inside the freezer compartment. Replace if cracked, broken, or damaged from repeated fan motion or temperature stress.
I watched the video AppliancePartsPros.com provided and was done in less than an hour after receiving the parts. Easy-Peasy! No more middle-of-the-night "popping" of the fan blades hitting the evaporator motor's mounting bracket. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.