Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your oven won't preheat or shows an F3 error code, this temperature sensor monitors oven heat and safety features. Direct plug replacement, 15-minute fix.
I was able to find the model number on the lower right hand side of the range/oven, a GE True Temp. I Googled it to find parts, and thought I had found the correct sensor, but was very pleased that the ApplianceParts sire suggested I check compatability again before the order. I would have ordered the wrong sensor kit other wise. I DID get the correct one order. It arrived on time. The tricky part was get the old sensor out without having to pull the oven/range combo out form the wall over... Read more
Range won't heat or burners stopped working? A burnt or melted terminal block may be the cause. This wiring connection hub routes power to elements. DIY repair in 10-20 minutes.
Removed damage terminal block ordered new block on line. when I received new block installed it stove works fine easy to replace. If I had not been home at the time when this happen it may had cause a big house fire. Read more
The Rear Door Support is an OEM replacement part for GE ranges. Located at the base of the range, this bracket provides weight-bearing support for the lower oven drawer. It facilitates smooth extension and retraction of the drawer. Causes of faulty support can include cracks or fractures developing over extended use, worn joints unable to sustain drawer weight, or misalignment from repeated opening/closing stress. Symptoms of a bad support include:
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges.
So, in the process of a kitchen remodel my GC managed to lose *both* of the rear plastic supports for my GE stove! The drawer was totally unsupported without the brackets. I managed to find them on your site and see that they were a new and better design (rear mount with screw vs side mount and no firm mounting). The install was a snap and the brackets work excellent. I wish I knew that there was a new design years ago or I would have bought them much sooner! Thanks!! Read more
Replace your cracked, broken, or missing range oven door handle. Mounts externally on the oven door for safe opening and closing during cooking cycles.
Removed 2 outer screws that held on handle and 4 inner screws which held on handle to outer panel. Installed new handle with 4 screws and installed outer 2 screws with spacers which were in door. Read more
Burner won't shut off or stays on high? The infinite control switch regulates surface burner heat. Easy DIY repair, typically 10-15 minutes to replace.
Replaced the large burner control switches for the ones giving trouble. Since the other two switches had seen as much use as the faulty ones, replaced them too. After putting in new switches, found that one large burner had burned out so replaced it also. Range now cooks as good as new Read more
Inner oven door glass installs inside the door cavity behind the outer panel. Replace if shattered, cracked, or broken to restore viewing window function.
I ordered the part from APP, removed the door, removed the inside panel and replaced the glass. Hardest part was figuring out exactly which screws to remove to open the door. Read more
Broiler pan for ranges and ovens. Installs in main oven cavity to hold food under broiler element. Replace if cracked, warped, or heavily stained.
Fast delivery, great service Read more
Replace your cracked or broken oven door window pack assembly. Includes glass and gasket for a clear view while maintaining internal temperature and insulation.
The glass was easily replaced. Just a few screws to remove cover then remove bad glass then i dropped in the replacement glass then reinstalled cover. Ithen put the door back in the stove. 15 minute job!!! I was so surprised to see how easy it was!!! Thanks! Part fit perfectly!!! Read more
The Large Haliant Element is an OEM replacement part for GE ranges/cooktops. This haliant burner element is 8 inches in diameter. The element lies underneath the stovetop and will need to be replaced if it stops heating. 8-inch 2100 watt. Includes limiter Causes of a bad halogen element can include cracked or damaged ceramic material, broken support coils, or malfunctioning heating coils. Symptoms of a bad halogen element include:
This is a genuine OEM part that works for some models of GE, and Hotpoint models.
Unplug range. Open oven door to gain access to the cook top lock-down screws, located under the front edge of the cook top. Tip the cook top up and carefully remove it by pulling forward. Set aside in a safe place. Remove old, burned-out, element by removing the single lock tab, located on one of the three mounting posts, then lift up. Leave the wiring attached. Flip the element over and remove the three mounting tabs, making note of their numbered locations. Transfer the mounting tabs to... Read more
Burner stays on high or won't turn off completely? This infinite control switch regulates surface burner heat. Simple 10-minute DIY fix with video guide.
I first checked a repair video and found the procedure was a 10 minute job. I then went to the website, put in my stove model number and searched for the switch. While I was looking I was offered a chat session with one of their experts. I am glad that I accepted. The switch I was looking at was not the right switch for the job. My expert verified my model number and the switch that need to be replaced. After a couple of minutes, she came back with the right part and placed the order for... Read more
Covers the control panel lamp opening to diffuse light and protect from debris. Replace if broken, cracked, or missing to restore clear indicator visibility.
Took top apart to find out that the problem was just the lens for the light was broken. Come to find out that the lens is what holds the light in place. When the lens broke the light fell down into the base of the cooktop. I bought a light and lens but for the price I could not go wrong. I cannot believe how fast and easy my order was handled!! Awesome company Read more
Replace your range's light receptacle socket when the oven light flickers or won't turn on. Easy DIY fix restores proper bulb connection. Confirm fit by model.
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more
The Medium Haliant Element is an OEM part for GE cooktops. This radiant heating element is located beneath the ceramic cooktop surface and provides a medium-sized heating area for cooking various dishes. This element measures 6 Inches. Causes of a bad haliant element can include electrical issues such as short circuits, wear and tear from regular use, or physical damage from impacts or overheating. Symptoms of a bad medium haliant element include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
We ordered a new elimate, which was shipped the same day. Very good. Read more
Mounting screw for washer components. Secures drain hose clamps, panels, and internal parts. Replace if missing, stripped, or lost during repair.
Put new hose on. It was the kind that pushed in and had a flange on it with two screws. Read more
Replacement oven door hinge supports and controls door movement. Install if your hinge is worn, broken, or causing the door to stick, sag, or misalign.
We had to pry the door open with a crow bar. We then ordered a replacement hinge from your company. We were able to find the part by looking at your diagram of our oven. We ordered it and it came in two days. My husband put it on and the door now works beautifully. Read more
Replace your range pilot indicator light when it stays on, flickers, or won't illuminate. Signals when cooktop elements are hot for safety. Verify fit by model.