Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Interior housing that supports and shields the oven lamp and lens assembly. Replace if cracked, broken, or damaged to keep the light secure and aligned.
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more
Attaches oven door panels together on your range. Replace this threaded screw if the original is stripped, missing, or no longer holding panels secure.
My son-in-law helped me. He pulled the liner open enough that he could see he just had to tighten up the existing screw on the door handle.. For the liner, we put a new screw in each side and tighted it up. At first we were afraid it was in the hole the screw went into but finally got it to screw in tightly. Back in business!!! Read more
Burner not heating or only partial ring works? This 9-inch dual radiant element restores full or inner ring heating. 15-minute DIY fix for cooktops.
Quick and easy fix. The hardest part was tracking down the correct part (which this was). 15 minute fix just make sure to take a pick of the wires before dismantling if it's not going right back together. Read more
Door pad gasket creates a seal between your oven door and front panel. Replace if worn, cracked, or causing heat loss. Confirm fit with your model number.
Ordered replacement from appliancepartspro.com and installed. Took maybe 10 minutes to remove old one and instal new. Read more
The Wall Oven Capacitor Motor is an OEM part for GE wall ovens. Located inside the oven cavity, this motor is responsible for turning the convection fan which circulates hot air for even baking and roasting.
Symptoms of a bad capacitor motor include:
Causes of failure can be wear over time, damage from debris inside the oven, or occasional voltage fluctuations which can degrade motor components.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
With the support of Appliance Parts Pros, I ordered 3 parts (plus glass stove top cleaner) that were suspected to be the cause of the problem for a total of $49.59. Easily replaced the Range Oven Sensor, $15.91, at the back of the interior oven & that was it! All oven features work fine & my wife set the oven for the clean cycle earlier today. So far, so good! Thanks for your help! Would recommend Appliance Parts Pros to anyone. Read more
Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.
Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.
Fix a loose or misaligned cooktop with this maintop strike plate. Restores secure engagement between the cooktop and latch mechanism. Simple repair.
6-20 x 3/8 inch nickel screw secures trim panels, brackets, and small components in dishwashers and ovens. Replace missing or stripped screws.
I positioned the element under the top of the stove and placed it back in there with the bracket and screw. Turned out perfectly. Read more
Replacement mounting spacer for electric ranges. Positions and supports panels to maintain alignment and proper fit. Replaces worn, missing, or damaged spacers.
I ordered a hinge from Appliance Parts Pro. I received it in three days and had my stove up and running in no time. I got all my baking done and shipped out in record time. I'm 78 years young and if I can do it, anyone can. Appliance Parts Pro can give you instructions and get the parts to you in record time no matter what appliance you need parts for. Read more
Secures and aligns your range oven door for smooth opening and closing. Replace this hinge if bent, damaged, or causing door sag and seal misalignment.
YouTube video was very clear. Read more
Replacement screw secures panels, brackets, and trim inside your oven or range. Restores tight fit when original hardware is missing, stripped, or damaged.
Seals and cushions your oven door to reduce vibration and rattling. Replace when worn to restore proper spacing and eliminate air leaks. Verify fit.
Secures the oven door hinge to the range cabinet frame. Replace if cracked, bent, or damaged to restore proper door alignment and closure fit.
The oven door was open and the wife fell onto the door. After that, the door would not close all the way and hung lower than it should. I could not tell if it was the hinge or hinge receiver that was bent so I ordered both. When the parts arrived I removed the door by unlatching the hinge and lifting it off the range. the door has 3 screws on the bottom and two at the top. Once the door was separated each hinge has three screws to remove and replace the hinge. Reassembled the door, reinstalled... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.