Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
This miscellaneous parts package contains assorted small replacement parts commonly used for minor appliance repairs and upkeep. It provides a convenient set of replacement pieces to help restore secure fit and basic function. What it does:
I ordered the part from you which amazingly showed up less than 20 hours after I ordered it. I then watched a video you produced about replacing the part. Between those two things I had my dishwasher up and running withing 36 hours of talking to your rep. Read more
Note: New rack no longer includes removable tines or cup shelf. This part is a lower dishrack. The lower dishrack is the lower shelf of a dishwasher that holds plates, bowls, and utensils. To remove the old dishrack, simply pull it out and lift the wheels up from its track. Set it off the side, and lift the new dishrack. Slide it into its track and make sure it is locked in. If it is gliding in and out in a smooth way, it has been installed properly.This genuine replacement OEM part is sold individually and is compatible with Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand appliances.
Bottom replacement rack is a complete unit. Simply slid the old, rusted one out and slid the new one in. Read more
Located on the supply tube behind the upper dishwasher rack.
Dishes were 'gritty' with an almost invisible coating of specks smaller than grains of salt. Prior to ordering parts, I had to determine which part(s) needed replaced and which could benefit from a good cleaning. After viewing Appliance Parts Pros YouTube Videos, I removed the Main Manifold (snaps right off) including the Top Spray Arm. I discovered the Flappers of the Docking Station (AP6009888) were worn out and/or missing. I removed the Docking Station simply by popping the old one off... Read more
No longer includes course threaded sleeve. When replacing upgrade to new motor. For new motor, order from parts list by model number.
Searched the dishwasher model on ApplianceParts (had used them for a washing machine repair a few years earlier). Was looking for an exploded diagram of the internal parts so I could figure out what might be the problem. There was a video for a motor seal repair kit that seemed to address the bearings which is what I suspected was the culprit. The video started by noting that "you want to replace the motor seal if 1) you have a leak or 2) your dishwasher is making a noise". I watched the... Read more
Color white. The wash arm measures about 11 inches, and the retainer about 3 inches.
Spun each of the three wash arms by hand. All could be made to touch/scrape but the top one was super wabbly. Ordered both the arm and clip. Repair took less than a minute. Used a screwdriver to pry loose one side of the old clip to remove. Aligned the new parts and easily snapped into place. Read more
Ordered the part. Arrived the next day. Took the eleven screws off the door exposing the back of the Soap/Rinse Aid dispenser. Six screws hold it on the inside of the door. Popped off easily. There is a plug that runs from the timer to the dispenser…it's a pain to get off. Use a flat head screw driver. Screwed the new unit in place. Plugged it in. Put the door back together. I accidentally caught the door catch in the door and screwed it together seizing it...so I had to take the top screws off... Read more
Kit includes more than shown on picture. New kit is for both plastic and stainless tubs. Plastic tubs use only the float and the switch stainless tubs use all the parts.
I replaced the float switch. It was an easy enough repair. I didn't have to remove the dishwasher to do the work. The part is accessible from behind the front skirt.The only problem was there is not a lot of space to work in. Getting the fastener off and on requires a stubby nut driver. I used a flexible extension instead. I had to feel for the nut as the bottom of the door blocked my view. A ten minute job and the dishwasher is back in service (for half the cost of my local parts place) While... Read more
Bottom
Part I ordered was not the problem. The corners of the dishwasher were loaded with garbage, grease and other foodstuffs. I digitally cleaned out the corners, re-seated the door seal and used a cleaner in the machine. Did two courses of cleaning. Also needed to clean the pump screen and top of the pump. Lots of junk there. All of this fixed the leaking and the junk on the dishes. Hardest part was loosening the duct from the top impeller to the pump. Read more
Replaced gasket. Read more
This inner slide rail (track) supports a refrigerator/freezer drawer and restores smooth, stable gliding for the drawer. Replacing a worn or damaged rail helps stop sticking, misalignment, rattling or partial drawer drops. What it does:
What's included: One inner slide rail (track) Install notes:
Replaced pump and filter. Read more
Early last year our dishwasher stopped running, and we did things the old fashioned way by standing in front of the sink ourselves. When Thanksgiving and Christmas came back to back with extended family in the home my wife said that she wanted her dishwasher back. After doing some reading and some simple diagnostic stuff, I contacted one of your staff through Chat, affirmed a few things, and ordered the right Control Board. The installation literally took less than 10 minutes, but my wife was... Read more