Need Help?
Call
Range overheating or won't turn on? This high limit safety thermostat monitors internal temperature and cuts power to prevent damage. Restores safety.
Fix a loose or misaligned cooktop with this maintop strike plate. Restores secure engagement between the cooktop and latch mechanism. Simple repair.
The Rear Vent Trim and Gasket Assembly is an OEM part for GE ranges. It seals the rear vent opening of the range, directing hot air and potential gas fumes outside through the exhaust vent during oven use. Without an intact seal provided by the gasket and vent trim, combustion byproducts can enter the kitchen presenting safety and performance issues.
Causes of a bad range rear vent assembly include wear over years of use with high heat cycles, cracking or degradation of sealing materials, or damage from cleaning or impacts around the vent area.
Symptoms of an issue include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replacement mounting spacer for electric ranges. Positions and supports panels to maintain alignment and proper fit. Replaces worn, missing, or damaged spacers.
I ordered a hinge from Appliance Parts Pro. I received it in three days and had my stove up and running in no time. I got all my baking done and shipped out in record time. I'm 78 years young and if I can do it, anyone can. Appliance Parts Pro can give you instructions and get the parts to you in record time no matter what appliance you need parts for. Read more
Replacement screw secures panels, brackets, and trim inside your oven or range. Restores tight fit when original hardware is missing, stripped, or damaged.
Decorative badge assembly that mounts on the front of your range. Displays brand and model information. Replace if cracked, peeling, or missing.
Secures the oven door hinge to the range cabinet frame. Replace if cracked, bent, or damaged to restore proper door alignment and closure fit.
The oven door was open and the wife fell onto the door. After that, the door would not close all the way and hung lower than it should. I could not tell if it was the hinge or hinge receiver that was bent so I ordered both. When the parts arrived I removed the door by unlatching the hinge and lifting it off the range. the door has 3 screws on the bottom and two at the top. Once the door was separated each hinge has three screws to remove and replace the hinge. Reassembled the door, reinstalled... Read more
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more
I got online and found AppliancePartsPros.com. I found others had the same problem, and had replaced the switch, with my model number your rep got me the exact switch and a video on how to change it. It took approx 15-20 min . was very happy with the service, will use again in future if needed. Gary Read more
10-32 threaded screw secures control panels, brackets, and internal components in electric ranges. Replace when stripped, missing, or loose.
Frames and protects your range's control panel, touch controls, and display screen. Replace if cracked, discolored, or damaged. Verify fit with your model.
Seals the control panel area to keep moisture, grease, and debris out of the electronics cavity. Replace when worn or missing to prevent buildup. Confirm fit with your model number.
The Insert Plug is an OEM part for GE electric ranges and cooktops. It serves to seal any unused gas orifices to prevent leaks, drafts, and infiltration of foreign materials.
Symptoms of a faulty or missing plug include:
Causes are typically loose or lost plugs from normal use and cleaning over time. Replacing with this genuine GE part restores safety and maximum efficiency. Compatible models include Hotpoint, RCA, and select Kenmore lines as well - securing all openings protects both you and your appliance. Avoid future issues and keep cooking functions running optimally.
Replacement side trim for electric range doors. Restores door edge finish when original is cracked, broken, or worn. Maintains proper door fit and appearance.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.