Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Switch, Micro is an OEM part for LG microwaves. This micro switch is crucial for the operation of the microwave door mechanism, ensuring that the microwave only operates when the door is securely closed.
Causes of a bad micro switch can include wear and tear from frequent use, damage due to electrical faults, or physical impact that disrupts its functionality.
Symptoms of a bad micro switch include:
This OEM LG part is also compatible with Sears/Kenmore models.
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more
Fastens panels, brackets, and covers inside the microwave cabinet. Replace if cracked, broken, or missing to restore secure mounting and alignment.
Bought the cover and the rivet put it on very easy repair Read more
Microwave won't heat or power on? This bottom thermal cut-off protects against overheating by cutting power when excess heat is detected. Easy fix.
Simple fix, after determining the fuse was good and not getting voltage to it, I followed the schematic and tested the TCO. It was the problem. Ordered it from APP and received it 5 days later. Changed the part and Voila, Microwave back in action. Read more
Microwave runs but won't heat? This magnetron generates the RF energy that cooks food. Moderate DIY repair, typically completed in about an hour.
After some research, and based on the symptoms, consulted with repair person and figured it was the most common 3 parts (magnetron, capacitance, diode, and threw in a new fuse). So spent $190, and service tech came, replaced them, all good again. All done in an hour. Read more
This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:
I replaced the stirrer fan cover and fan, which had some carbon and slight burn marks on it. It was difficult to remove the fan cover as it did not rotate. I had to pry it off with a flat blade screwdriver, breaking the plastic tabs on the cover (which was being discarded anyway). I then cleaned any visible carbon deposits and replaced the cover and fan, using the old stirrer fan holder as it appeared OK. However, I was unable to rotate the cover into the locked position so I could not insert... Read more
Holds the light bulb and maintains electrical connection in your microwave. Replace when socket is cracked, heat-damaged, or causes flickering lights.
Added an additional light socket to the existing reflector. Changed the original 40 watt incandescent bulb to two 5 watt LED bulbs. It's actually bright enough for my old eyes now. Read more
Flat bolt fastener for securing microwave to cabinets or wall brackets. Replace missing, stripped, or corroded mounting hardware to restore secure installation.
The special bolts required to mount unit to cabinets were missing. APP.com had the parts I needed. Read more
Secures microwave components and mounting brackets. Replace this hardware assembly if screws are stripped, bolts are missing, or fasteners are damaged.
Removed the dozen or so screws on the microwave cabinet housing (top & 2 sides). Removed the 2 screws from the assembly holder hut bracket and replaced the assembly holder nut with a new one and re-installed the 2 screws. Re-installed the dozen or so screws on the cabinet. Finally re-installed the microwave with the 2 new 3-7/8'" long bolts thru the kitchen cabinet. Read more
Microwave shuts off unexpectedly or won't power on? This thermal cutout thermostat monitors temperature and prevents overheating. Easy DIY fix.
My door switches weren’t working properly. I checked them with an ohm meter. Ordered the defective switches. Microwave is working good now. Read more
Metal mounting plate that secures the microwave chassis to the wall or cabinet. Replace if bracket is bent, cracked, or missing during installation.
Ordered it from you. Read more
Rear wall mounting plate bracket that supports over-the-range microwaves during installation. Replace if bent, broken, or missing for secure wall mount.
Bought these two pieces through Appliance Parts Pro - they matched exactly at half the cost. Shipped same day. Read more
Microwave won't start or stops mid-cycle? This door latch assembly engages door hooks and activates interlock switches to restore proper operation.
This is a small fan blade that sits inside the microwave cavity and rotates to distribute microwave energy evenly throughout the cooking area. It helps prevent hot and cold spots in your food by stirring the microwave waves as they enter the cavity. Replace this blade if your microwave heats unevenly, if the blade is cracked or warped, or if you hear unusual noises during operation.
Replacement pieces Read more
Connects the turntable motor to the glass tray in your microwave. Replace if cracked, broken, or worn to restore smooth rotation and prevent slipping.
Unplug your microwave. Took the screws off of the bottom of the unit with it still on the cabinet. The whole bottom panel swung down to expose the turntable motor. I took the power cable loose (just pull it off). It was one screw to take the motor out. Word to the wise: DON'T try to take the plastic coupler off before the motor. Their is a tab that holds it in while the motor is in place. If you pry it up you will break it, trust me. ;) Turn the motor out of its housing and it come right out.... Read more
This latch body is the door latch component that secures the appliance door during operation, restoring reliable closure so cycles can run normally. Use it to replace a worn or damaged latch that won't hold the door closed. What it does:
Replaced all three door switches and bracket. It had a break in it. Took less than an hour to fix once all parts arrived. Read more
Went to the GE website and found the diagram and operating manuals for my model of microwave . Located the necessary parts that needed to be replaced and then purchased them on AppliancePartsPros.com at a savings. Repair was a 15 minute event and microwave now enters cooking mode and door shuts and stays shut just like before it was broken. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.