Jvm154dpicc Parts

This noise filter helps reduce electrical interference on the appliance power line, protecting control electronics and improving operational stability. Replacing a faulty filter can reduce intermittent controls, audible buzzing, or interference with nearby electronics. What it does:

• Suppresses electrical noise on the incoming power line to help protect control boards and communications modules.
• Helps prevent symptoms such as intermittent operation, unexplained control resets, audible humming/buzzing, or radio/TV interference near the appliance.
• Installs in the appliance power circuit to filter line noise and reduce stray interference that can affect sensitive electronics.

• Always disconnect power to the appliance before servicing to avoid electric shock.
• Ensure secure wiring and a proper ground connection when installing the replacement filter.
• Handle the part carefully and avoid touching electronic contacts.
• Follow OEM instructions for placement and mounting.

This oven grille trims the front of the range or built-in oven, restoring a finished appearance and helping direct airflow. Replaces a damaged or missing front trim to improve fit and finish. What it does:

• Covers and protects the gap between the oven cavity and control/face trim
• Directs vented airflow away from the control area for proper airflow routing
• Restores the oven's factory appearance when original grille is cracked, warped, or discolored
• Helps prevent small debris from entering the vent opening

• One grille trim piece

• Designed for direct replacement; verify fit to your specific model before installation
• Remove power to the appliance before beginning any removal or installation
• Use appropriate hand tools and avoid over-tightening fasteners to prevent cracking

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This noise filter assembly is a direct-replacement line filter that helps reduce electrical interference and appliance noise for compatible GE appliances. It restores cleaner power to control boards and can help stop buzzing or interference-related behavior. What it does:

• Suppresses incoming electrical noise and RF interference on the power line
• Helps prevent control glitches and erratic behavior caused by voltage transients
• Can reduce humming, buzzing, or audio/EMI interference from the appliance
• Supports stable operation of electronic controls and sensors

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle wiring and connectors carefully; match wires/terminals exactly on reassembly
• Secure the filter in its mounting location and ensure wiring is routed clear of moving parts

Replacement mounting bracket that secures internal panels or components to the appliance frame, restoring alignment and stability. Use this bracket to replace cracked, bent, or missing supports that cause vibration or loose parts. What it does:

• Supports and secures panels, trim, or internal assemblies to keep components properly aligned.
• Reduces rattling, sagging, or movement caused by a broken or missing bracket.
• Restores stable mounting after impact, wear, or stripped mounting points.
• Helps maintain proper fit and operation of adjacent parts by providing a solid attachment point.

• Disconnect power (and water/gas if applicable) before starting any repair.
• Basic hand tools required; remove adjacent panels or trim for access as needed.
• Retain original fasteners when possible; replace damaged clips or screws.

This cover-damper is the replacement plastic cover that fits over the refrigerator air damper to help direct cold air between compartments for more consistent cooling. Replaces a cracked, broken or missing damper cover. What it does:

• Protects the damper assembly and helps channel airflow from the evaporator to the fresh-food and freezer compartments
• Restores proper air direction when a broken cover causes uneven temperatures or poor cooling
• Works with the damper to reduce drafts and improve compartment temperature balance
• Simple, passive part that mounts to the damper housing

• One cover-damper

• Disconnect power to the appliance before starting any repair
• Remove interior panels or shelves as needed to access the damper housing; handle plastic clips gently to avoid breakage
• Verify fit and orientation against the existing part before finalizing installation
• If the damper motor or actuator is damaged or the issue persists after installing this cover, inspect the full damper assembly

This thermostat regulates oven temperature to help maintain consistent cooking results and prevent under- or over-heating. It replaces a failed temperature control component to restore accurate oven cycles. What it does:

• Senses oven temperature and signals the control to cycle the heating element or burner
• Helps correct symptoms like oven not reaching set temperature or running too hot/too cold
• Works with the oven's control system to maintain stable cooking temperatures
• Functions as the temperature-sensing switch for bake/oven operation

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the thermostat and sensing bulb carefully; avoid kinking or damaging the capillary tube if present
• Mount and secure per the OEM layout; confirm correct orientation and probe placement for accurate sensing

This lamp drawing is the appliance lighting assembly that provides interior illumination for safe visibility and operation. It restores proper lighting so you can check contents and settings without opening the appliance in the dark. What it does

• Houses and positions the interior lamp to produce even light where needed.
• Connects to the appliance wiring to deliver power to the lamp.
• Commonly replaces assemblies that are cracked, broken, loose, or no longer illuminating.
• Resolve symptoms such as dim, flickering, or non-working interior lights.

• One lamp drawing lighting assembly.

• Always disconnect power (unplug or shut off breaker) before accessing electrical components.
• Handle lamp sockets and wiring gently to avoid damage; replace bulbs per manufacturer specifications.
• Verify fit and connector type before installation.

This washered screw secures panels and internal components where a combined screw-and-washer fastener is required, restoring proper fit and stopping movement or rattling. Simple replacement with the correct fastener keeps assemblies aligned and stable. What it does

• Secures panels, brackets or components where a washered screw is specified
• Replaces missing, stripped or corroded fasteners that allow vibration or gaps
• Helps stop rattling, loose panels or misaligned parts caused by a failed screw
• Provides a sealed bearing surface to distribute load and prevent pull-through

• One washered screw

• Disconnect power and/or water to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid cam-out and fastener damage
• Align parts before tightening and snug; avoid over-tightening which can strip threads or crack plastic

A full outer refrigerator door assembly that restores the appliance's exterior appearance and provides the correct mounting surface for handles, hinges and gaskets. Replacing a damaged or dented door helps the fridge look and function as intended. What it does

• Replaces a bent, cracked or cosmetically damaged outer refrigerator door panel
• Restores proper mounting points for handles, hinges and trim pieces
• Helps maintain proper door alignment to support reliable opening and closing
• Prevents drafts and condensation issues caused by misaligned or warped doors

• Installer required: Due to size and weight, a second person is recommended for safe handling
• Tools: Basic hand tools typically needed to remove and reinstall hinge hardware and trim
• Safety: Disconnect power and empty door shelves before starting; support the door when removing hinge fasteners

A replacement control panel cover that restores the appliance's front console appearance and protects the underlying control assembly from spills and debris. Fits the OEM panel opening for a clean, factory look. What it does:

• Covers and protects the control console assembly from moisture, grease and everyday wear
• Keeps buttons, switches and display areas free from debris that can interfere with operation
• Restores the appliance's exterior appearance after damage or wear to the original trim
• Helps maintain proper airflow and spacing around control components

• One control panel cover (trim piece) as shown

• Designed for a direct fit; install with basic hand tools — disconnect power before starting
• Handle gently to avoid scratching the finish; align mounting tabs before securing
• Replace missing or damaged screws or clips with OEM-specified fasteners