Jvm3160rfss Parts

A complete fan assembly that circulates air inside the appliance to help cool components and move heated or cooled air where needed. Replaces a worn or noisy fan to restore proper airflow and reduce overheating risk. What it does

• Circulates air for cooling electronics, components or internal compartments
• Helps maintain even temperature distribution during operation
• Stops excessive vibration or noise when the motor or blade is worn
• Prevents airflow-related faults that can trigger appliance error codes

• Disconnect power before servicing to avoid shock or injury
• Remove access panels and mounting hardware to replace the assembly; retain fasteners for reinstallation

The Microwave Case is an OEM exterior shell compatible with GE built-in microwaves. It fully encloses the unit, protecting internal components from damage.

Causes of a bad case can include dents, cracks or peeling of the protective surface over time. Exposure to heat or moisture may degrade certain materials. 

Symptoms of a bad case include:

• Physical deformities that compromise the outer appearance
• Gaps or holes that allow access to internal electronics
• Loose or detached door and control panel trim 

This case is also compatible with select Hotpoint and RCA microwaves.

The Diode Cable Assembly is an OEM part for GE microwaves. This part converts AC power to DC power, which is crucial for the microwave's operation.  

Causes of a bad diode cable assembly can include electrical surges, overheating, or general wear and tear.  

Symptoms of a bad diode cable assembly include:

• Microwave not heating food
• Unusual noises during operation
• Burning smell or visible damage to the cable
• Microwave shutting off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:

• Secures panels, brackets, or component mounts to restore proper alignment and support
• Stops rattling, vibration, or loose hardware caused by damaged or missing rivets
• Provides a durable mechanical fastener where original rivets have sheared or loosened
• Helps maintain safe operation by keeping parts properly retained

• Disconnect power (and gas/water if applicable) before attempting any repairs
• Removal may require drilling out the old rivet; installation typically needs a rivet gun or equivalent tool
• Keep hardware orientation the same as the original; replace any damaged surrounding parts

This resin canopy is the interior ceiling cover inside the microwave cavity. It shields the stirrer area from grease and splatter to help maintain even heating and protect internal components for safer, more reliable cooking. What it does:

• Covers and protects the stirrer/waveguide opening at the top of the cavity
• Helps promote even microwave energy distribution for consistent cooking
• Shields internal parts from grease, steam, and food debris
• Replace if warped, cracked, burned, discolored, loose, or if you notice arcing/sparking inside the cavity

• 1 resin canopy

• Disconnect power before servicing; microwave components can carry high voltage
• Remove the old canopy by releasing tabs or fasteners from inside the cavity
• Clean the cavity roof and seating surfaces before installation
• Ensure the canopy is fully seated and do not operate the microwave without it installed

This damper bracket secures the air damper assembly to the appliance, keeping the damper aligned for proper venting and reducing vibration. Replacing a damaged bracket helps restore stable damper movement and correct airflow. What it does:

• Secures and supports the air/vent damper so it can open and close correctly
• Prevents rattling or vibration caused by a loose or broken bracket
• Helps resolve improper venting or inconsistent temperature control linked to a misaligned damper
• Works as the mounting point for the damper assembly to the cabinet/chassis

• One damper bracket

• Always disconnect power (and water, if applicable) before servicing the appliance
• Access typically requires removing panels—watch for sharp edges and keep fasteners organized
• Bracket installs with mounting screws; verify damper alignment and smooth movement before reassembly

This fuse assembly is a safety component that opens the circuit when an overcurrent or short occurs, protecting the appliance's wiring and electronics. Replacing a blown fuse assembly can restore power once the underlying fault has been corrected. What it does:

• Provides overcurrent protection by interrupting power during a fault
• Helps with symptoms such as a completely dead unit, dark display/control panel, stopping mid-cycle, or repeatedly blown fuses
• Protects internal wiring and control components from damage
• Designed to fail safely to prevent further electrical issues

• 1 fuse assembly

• Disconnect power to the appliance before servicing; if hardwired, switch off the circuit breaker
• Replace only with the correct fuse type/rating specified for your model
• Identify and correct the root cause of the blown fuse (e.g., shorted wiring or component) to avoid repeat failure

This replacement plate restores the original support and fit for the appliance component it secures, helping stop rattles and misalignment. Use this OEM-design plate when the original is bent, cracked, or missing. What it does:

• Provides a stable mounting surface to secure adjacent parts and assemblies
• Prevents movement that can cause noise, misalignment, or uneven operation
• Restores correct spacing and alignment for panels or elements
• Helps maintain safe, consistent appliance performance when damaged

• One plate

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle edges carefully; replacement metal parts can have sharp edges
• Verify orientation and alignment before tightening fasteners; use only the hardware specified by the manufacturer

The door assembly is an OEM part for GE microwaves. It is responsible for sealing the microwave interior and providing a secure close and protection against radiation generated during cooking. It is designed to withstand the heat and pressures generated inside the microwave, providing a reliable barrier between the cooking space and the external environment.

A bad door assembly can lead to issues such as a loose or ineffective seal, difficulty in opening or closing the door. Causes of a bad assembly can include wear and tear over time, damage to the door components, or improper handling.

Symptoms of a bad door assembly include:

• A loose or misaligned door that doesn't close properly
• Difficulty in opening or closing the door smoothly
• Visible cracks or damage to the door assembly

Replace your worn-out or damaged door assembly with this genuine OEM GE part to ensure the safe and efficient operation of your microwave. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.