Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Installation instructions included.
Found the motor switch was fried. So replaced that and the capacitor. Starts fine now. Read more
Used for control panel.
Replaced direct drive washer motor coupling. Instructional video was right on and easy to follow. Was able to save a 15 year old machine for a few bucks. The shipping was super fast (within 2 days) and the customer service is fabulous. I would definitely recommend to everyone. Read more
This tub support assembly holds the washing machine drum in place and includes the spin tube for water drainage. It replaces worn supports that cause excessive vibration, loud noises, or drum movement during operation. Install when your washer shakes violently, makes grinding sounds, or the drum feels loose.
I installed all the necessary parts that I received from you and it works great, now. I received the parts in good time without overnighting them. I had the whole washing machine apart and went through it all before ordering parts. Tear down and assembly was easy. I just took my time. The washer is 17 years old and was well built. It was worth it compared to what is on the market today, and cheaper. Read more
Replaced transmission. If you have a laundry center like me, you don't have alot of space. Replacing the parts want difficult. Just limited space made it harder. Also couldn't find a removal video for one of these but using a video for a frigidaire stand alone washer ouput me in the ball park and figured it out from there. Appliance parts pros had the best process too! Read more
Hose used from Pump to drain connector.
Followed the instructions to remove covers to machine. Found water a the back of the washer at the floor where the water valve/vacuum break is located. Ordered parts, replaced the parts and no water leak. The KitchenAid Washer and Dryer is 28 yeasrs old. Since the parts and instruction videos are easy to followed I ordered extra parts to rebuild the pair. Will be placing orders for more parts to have extra parts as needed, and to repair my son/daugher-in-law washer and dryer as well. ... Read more
The washer lid switch actuator is a small component that triggers the safety switch when the lid is closed. Located on the washer lid, it presses against the lid switch to signal that it's safe to operate. Replace if the washer won't start even with the lid closed, or if it continues running with the lid open.
I ordered a door/lid switch kit and an actuator and replaced them both. I probably didn't need the actuator, but it probably didn't hurt to replace it. The only issue I had was that the switch didn't seem to fit that well when installed on it's own, along with the actuator. So, I used the plastic shield which I had, along with the switch and actuator, as well as the old screws, as the screws that came with the kit were not long enough to accommodate the switch, actuator, and... Read more
Used for leveling mechanism. Includes a quantity of one. Order as needed
Replace your worn washer tub seal to stop leaks and restore watertight protection. Install during tub or pump repairs. Verify fit with your model number.
The noise turned out to be the bottom bearing between the belt pulley and the transmission. Once apart an easy replacement. But you did need some tools to replace the bearing as in snap ring pliers and bearing puller. The water leak was the top rubber seal which is part of the seal kit. I had to make a puller out of some chain and a 2 jaw-bearing puller to the top of the transmission shaft to get the trunnion off but once it was off the rest was a snap. The video was a big help. Tested the... Read more
The repair sounds easy, doesn't it? It would have been, except that I actually had to do laundry while waiting for the part to arrive. So, I was using a pair of channel locks to turn the exposed bolt/post sticking out in order to turn the washing machine on. In doing so, I actually crushed part of the thread on the bolt, so the starter knob wouldn't screw on! In order to screw on the new starter knob, I had to buy a special nut which rethreaded the bolt. It cost $25 for rethreading kit! Once... Read more
This washer lid covers the top of your washing machine and contains the safety mechanisms that prevent the washer from operating when open. It houses the lid lock and safety switches that detect when the lid is properly closed. Replace this part if your washer won't start, the lid won't stay closed, or if the safety lock mechanism is broken.
New parts easy fix Read more
Use only in brake shoe assembly on roller & pin. Color: White/Grey.
Used for direct drive washing machines. Complete assembly includes 2 level mechanism links, 1 level mechanism spring, 1 knurled pin, 2 rear feet, 1 pad plate, 1 suspension plate, 1 base pad, and 1 suspension spring retainer.
I ordered a Base frame assembly and front leveling feet along with locking nuts. I removed the broken parts by putting the washer on its' side and I removed the bolts on the bottom of the back panel and removed the motor and the transmission. I installed the new feet onto the new base frame and i slid the new frame into place and then I reattached everything. Read more
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.