Kbfs0evms8 Parts

I fixed my fridge freezer side by side, first by watching appliance parts pros video to see if i could fix it, second i purchsed the part again from APP, received within 2 days, followed video and now the freezer is frozen and the fridge is at 38 degrees and wonderful. Thanks again appliance parts pros for the great videos. I have used and repaired many items and saved a ton of service call money. Read more

• Freezer not defrosting

My unit has a bottom freezer that is a drawer. I had to remove the drawer, rack, glides, glide tracks, and ice maker to remove the rear panel. This was a little difficult but after researching a few videos on line I learned some tricks that made it easier. I used a hair dryer to melt the ice. This is best done with 2 people having one at the back to sponge the water into a bowl from the pan to avoid a water mess. Using a bolt meter I checked the heating element and found it had continuity. I... Read more

Found the part # on manufacturers website. Ordered it from ApplianceParts Pros. Watched a video of repair on Youtube. Fix was done n about 10 mins. ApplianceParts Pros had the part cheaper than manufacturer. Delivery was prompt. Replacement easy. Read more

Ordered replacement door seals, assistance picking the seals and speed of shipping was excellent. The installation was about as easy a job as can be, remove old seals, clean the doors and press in the new seals. With that said, I don't believe these are the same quality as factory original seals, the doors do not close as positive as the original and I have an air leak in the freezer door seal allowing condensation and ice to form. Read more

Parts were replaced, using the old shelving as a guide. Read more

I ordered my bulb from AppliancePartsPros.( By the way it only took 2 days to get my order). Put it in and now I have light ! Thank you so much !! Read more

There are videos on You Tube,. After removing the bottom basket, you remove the entire drawer including the door together with it, by using a screwdriver to depress the white clip on each drawer slide which releases the slide from body of the freezer. Once you pull our the entire drawer, you will need to drill out a rivet to remove the old slide. You will need a rivet gun to attach the new slide. Read more

Even though the fasteners probably only cost a few cents, I had to buy a new mullion for my fridge. $80! $80 because two nylon fasteners were poorly designed. Replacing the part was easy once I paid the *$80* for the new part. Unscrewed the old mullion. Slipped on the new $80 part. Read more

Used screwdriver to push in plastic tabs holding old unit to the top of the refrigerator box Read more

All I needed was a $5 piece to fix my fridge, but without it I couldn't even us it. I ordered the part after 4:00 pm and had the new part shipped from Kentucky to NJ and had it by 10:00 am the next morning! Amazing! Great company. Read more

Replaced the ice level arm Read more

Had to take the back cover off. It was very tight to remove the fan that sat in the drip pan but did get it off, was able to apply the same level of cursing and got the new pan installed, installing the drain tube was a breeze. Found the parts price very reasonable. Hoping the Whirlpool redesigned the pan so I won't have to do it ever again. I was surprised at how bad the quality of their original part was. Probably saved myself $150.00 on buying the part and doing it myself Read more

• Leaking

I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level. With guidance from the video, I removed the icemaker from the wall of the freezer. The... Read more

Let the gaskets straighten out a bit overnight. Pulled out the old gasket, Cleaned and dried the area well though almost all the mold was in the old gasket. Pressed in the new gasket. Use a hairdryer to warm up and press the slightly deformed areas of the gasket into place. Quick and EASY. Read more

Purchased 2 replacement feet risers. A very awkward repait. Read more

I called Sears to schedule a service call for Sat. Morning. At 11:00 a.m. A service man called and said he was going to do the service call (the original tech was going to be delayed), so he had been scheduled instead. He had another call before he could get to me (an hour drive one way And he would get lunch and see me later. I asked him about how long it might take, he said they do not charge by the hour. He said he couldn't remember for sure, but it was between $200.00 and $250.00, but... Read more