Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice won't dispense or jams in chute? Cracked bin or broken auger blades stop ice flow. This ice bin assembly restores dispensing. Easy DIY, no tools.
Replaced ice bin assy. Read more
Ice maker overflowing or not stopping? This shut-off arm extension clips onto the bail arm to help the bin detect when full. Simple 5-minute fix.
Purchased Appliance Parts Pros replacement ice maker, removed the defective unit, matched the proper wiring harness using the wiring color codes at the P and J side connectors. Approximately 1 hour following the installation, I delightfully heard the first set of cubes ! Read more
This is a gear shaft that serves as part of the drawer slide mechanism in the freezer section of your refrigerator. It helps the freezer drawer glide smoothly in and out on its track. Replace this shaft if the freezer drawer sticks, wobbles, or does not open and close properly.
Put the new parts I bought from you on and made some fixing on the rails and done? Great part and fast shipping, thanks Read more
Freezer or fridge light not working even with a new bulb? This light socket provides the electrical connection. Basic DIY repair with video guide.
Replaced those two items listed above, please continue reading! I'm a mechanic by trade, so I have the basics. And what made this job easy? Appliance parts pros! very easy access to Part numbers and Diagrams, Online help, Customer service, and the list goes on. You will see several other sites, However! Wouldn't it be nice, knowing the above? Go no further! If you get stumped on anything during your Maintenance or Repair, They will Help. Read more
This is the glass insert for the crisper cover in your refrigerator. It sits above the crisper drawers to provide a sturdy shelf surface and help seal the drawers, restoring safe, usable storage when the original glass is damaged.
Replaced with a new one Read more
This metal or plastic slide rail mounts inside the freezer compartment and allows the freezer drawer to glide in and out smoothly. It supports the weight of the drawer and its contents while keeping the drawer aligned on its track. Replace this part if the freezer drawer sticks, tilts, derails, or no longer opens and closes evenly.
This acoustic fiber is the sound-absorbing insulation used in a refrigerator's machine compartment. Replacing a missing or damaged pad reduces operating noise from the compressor area and helps maintain the unit's intended sound levels.
Put the new filter on. Read more
Refrigerator not cooling or freezer too warm? A damaged evaporator fan blade stops cold air circulation. This replacement restores airflow. Video guide included.
Evaporator fan was loud and eventually quit. This allowed the freezer temp to rise above 18 deg. which they activated the PF code. Replacing the evaporator fan motor fixed the problems. Read more
Covers the lower front opening of your refrigerator. Replace this grille when the original is cracked, broken, or missing to restore a finished look.
First of all, I called your customer service line with a question about navigating your parts web site... I wish I could remember the name of the woman who helped me because she was very good at her job. She was obviously well trained and experienced as she very quickly helped me to better understand how to navigate the site, and find the parts required... Secondly, whoever designed and built your self-help parts search tool did an amazing job. Given the scope and complexity of cataloging... Read more
Fix frost buildup and warm temps with a new defrost thermostat. Monitors evaporator coil temperature to prevent ice accumulation. DIY-friendly repair.
Replaced defrost thermostat, replaced frig thermistor. Good experience. Excellent support and assistance for Maytag. Read more
Color: clear. Measures about 11 inches wide by 7 inches high.
Bought a new one. Read more
Limits refrigerator door travel to prevent overextension and cabinet damage. Replace if cracked, broken, or worn to restore controlled door movement.
Replaced door closure and door stop. Read more
Connects the dispenser motor to the ice bucket auger. Replace if stripped, worn, or broken to restore proper torque transfer and smooth ice dispensing.
Removed drip pan from ice dispenser. Removed two screws hidden behind drip pan to loosen bezel at bottom. Carefully lifted bezel off top hook to expose controller board cabling. Disconnected three connectors to control board behind bezel to remove bezel completely. Removed two (possibly three) screws to access the back of the ice chute mechanism. Removed broken paddle that just snaps in, being careful to capture paddle spring. Put paddle spring on new paddle and maneuvered spring-end... Read more
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
This mounting screw secures the freezer door handle to the door panel, ensuring the handle remains firmly attached. Replace it when the screw becomes stripped, corroded, or lost, causing the handle to become loose or fall off.
Rather than fighting the set screw, I ordered a new handle and extra parts to fix it. My father taught me to use anti seize which I used on all the threaded materials. Appliance parts and all the parts listed easy to see and Order Read more
Fix ice dispenser not extending or misaligned ice flow with this chute extension yoke. Supports smooth pivoting action. Easy 15-30 minute repair.
I took it apart several times and cleaned around where it was sticking but always kept going back to sticking. I finally ordered the part and replaced it. Very easy to do and now works fine. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.