Kitchenaid Artisan Stand Mixer Parts

The Center Shaft Kit is an OEM part for Whirlpool stand mixers. This kit includes the center shaft and necessary components to ensure the proper operation and rotation of the mixer's beaters or attachments.

Causes of a bad center shaft can include wear and tear from regular use, corrosion due to exposure to ingredients and cleaning agents, or physical damage from overloading or mishandling the mixer.

Symptoms of a bad center shaft kit include:

• The beaters or attachments not rotating properly
• Unusual noises during operation
• The mixer shaking or vibrating excessively
• Difficulty in attaching or removing beaters or attachments

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Thumb Screw is an OEM replacement part for Whirlpool stand mixers. It acts as a fastener for securely attaching mixing attachments like the flat beater, whisk, or dough hook onto the power hub. Color: Black. It measures about 1-½” wide by ¾” high.

Causes of a bad thumb screw can include wear and tear from repeated securing and loosening of mixing attachments over time. 

Symptoms of a bad thumb screw include:

• Mixing tools detaching or falling off during use  
• Difficulty attaching or removing attachments
• Looseness where the screw mounts to the power hub

This OEM Whirlpool part is also compatible with KitchenAid, Kenmore, and some Bosch and Breville stand mixers.

The Cap-Screw is an OEM component specifically designed for Whirlpool mixers. It contains precision mixing mechanisms that allow users to easily and effectively blend, whip, or beat ingredients.

Symptoms of a bad Cap-Screw include:

• Difficulty turning on or selecting speeds
• Excessive noise or vibration during use
• Inconsistent mixing performance
• Leaks into electrical components

Causes of failure can be faulty power switches, worn gears, damaged housing or bowls, or deterioration of internal wiring over time.

This Cap-Screw is also compatible for use with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and select Kenmore.

The Speed Link is an OEM part for Whirlpool stand mixers. This part connects to the mixer's speed control mechanism, helping regulate the speed settings for precise mixing performance.  

Causes of a bad Speed Link can include mechanical wear from frequent use, damage from overloading the mixer with heavy ingredients, or general degradation over time. 

Symptoms of a bad Speed Link include:

• Inconsistent mixing speeds
• The mixer not responding to speed adjustments
• Unusual noises coming from the mixer's speed control area
• The mixer running at a fixed speed regardless of the setting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Foot is an OEM part for Whirlpool stand mixers. This component is designed to provide stability and support to the mixer, ensuring it remains steady during operation. Positioned at the base of the mixer, the foot helps to prevent movement and vibration, which can enhance the efficiency of mixing and protect your countertop from scratches.

Symptoms of a failing Foot include:

• The mixer wobbling or moving excessively during use
• Increased noise or vibration when the mixer is running
• Visible wear, cracks, or deformation of the foot pad
• Scratches or damage to the countertop surface beneath the mixer

Causes of a bad foot can include prolonged use that wears down the material, exposure to heat or kitchen chemicals that degrade the foot, or physical damage from moving or storing the mixer.

This OEM Whirlpool part is also compatible with KitchenAid stand mixers.

The Washer is an OEM replacement part for Kitchenaid stand mixers. This washer is used as a spacer and insulator between gears to provide protection to the planetary bushing on the stand mixer.

Causes of a bad washer can include wear over time allowing increased play between gears, or deformation from heavy use that compromises its insulating properties.

Symptoms of a bad washer include:

• Excessive noise and vibration from the gear assembly
• Premature failure of gears or other components
• Reduced power transmission and mixing performance

This OEM replacement is also compatible with Maytag, Whirlpool, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Plate Spring is an OEM part for Whirlpool stand mixers. This spring maintains the proper tension and alignment of the control plate, ensuring the smooth operation and accurate adjustment of the mixer speeds.

Causes of a bad control plate spring can include wear and tear over time, stretching from continuous use, or damage due to overloading the mixer.

Symptoms of a bad control plate spring include:

• Difficulty in adjusting mixer speeds
• Mixer speeds not responding accurately to control adjustments
• Loose or unresponsive control lever
• Unusual noises during speed changes

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Hub Cap is an OEM replacement part is for Whirlpool stand mixers. The cap hub is a small part at the top of your mixer which you remove when adding an attachment such as the pastamaker. To replace this part, simply unscrew the knob to the right of the cap, and remove and replace the cap.

Causes of a bad hub cap can include cracks or punctures developing over extended use periods. Excessive downward force on heavy mixing attachments may also damage the cap over time.

Symptoms of a bad hub cap include:

• Fluids leaking into the base or motor areas during mixing
• Moisture or messes within the stand mixer body
• Inability to maintain suction or vacuum when using attachments

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This shaft-and-pinion assembly uses a 10-tooth pinion to transfer drive through the geartrain. Replacing a worn or stripped unit restores proper gear mesh and smooth, reliable power to the driven components.

• Transfers motor rotation through the geartrain via a 10-tooth pinion on a precision shaft
• Maintains correct gear engagement and alignment to minimize noise and wear
• Typical symptoms: grinding/clicking from the gearcase, output not turning or slipping under load, intermittent drive, or visibly rounded/broken teeth
• Can also reduce wobble or excessive play at the driven shaft

• Disconnect power before servicing; wear cut-resistant gloves and eye protection
• Access the drive/gearcase, note gear order and orientation (take photos for reference)
• Inspect mating gears and bushings; clean debris and replace any worn parts
• Apply manufacturer-specified grease to the gear teeth/bearings and confirm smooth rotation by hand before reassembly

This latch, link, and lever assembly restores proper latching action so the door or lid closes securely and the appliance can run as intended. It replaces worn or broken linkage that can prevent the latch from engaging.

• Connects the latch to its operating lever to enable smooth open/close action
• Helps resolve issues like a door/lid that won't latch, pops open, or won't start due to an unlatched condition
• Prevents intermittent cycle interruptions caused by a weak or misaligned latch linkage
• Durable components designed to maintain consistent latch engagement

• Unplug or disconnect power before servicing
• Access the latch area per your model's service information
• Note linkage orientation during removal to ensure correct reassembly
• Test latch engagement and operation before returning to service

The Washer is an OEM replacement part for Kitchenaid stand mixers. This washer serves a dual purpose as both a spacer and a cushion, positioned on the Vertical Center Shaft beneath the Bevel Pinion and Center Gear and above the planetary gear assembly.

Replacement of this washer should be considered if it becomes torn, damaged, or lost to maintain the mixer's performance and prevent potential damage to other components. It is recommended that two washers be used in every mixer to ensure optimal performance and stability of the internal gearing system.

Symptoms of a washer needing replacement include:

• Increased operational noise or grinding sounds
• Excessive vibration or instability during use
• Visible wear or damage to the washer itself

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Note: Shaft has been revised by the factory and the spring is no longer used.

The Hinge Pin is an OEM part for Whirlpool stand mixers. This part allows the tilt head of the stand mixer to pivot smoothly, enabling easy access to the mixing bowl and attachments. The hinge pin ensures that the tilt head remains securely attached while providing stability during operation.

Causes of a bad hinge pin can include general wear and tear, corrosion from exposure to moisture, or damage due to heavy use.  

Symptoms of a bad hinge pin include:

• Difficulty in raising or lowering the tilt head
• Tilt head not locking into place properly
• Unusual wobbling or instability during mixing
• Squeaking or grinding noises when adjusting the tilt head

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Power Cord is an OEM part for Whirlpool stand mixers. It provides the electrical connection between the mixer and the power source, allowing the appliance to function properly.

A bad power cord can be caused by wear and tear, accidental damage, or electrical issues. If you experience problems such as intermittent power supply, sparks or frayed wires, or the mixer not turning on at all, it may indicate a problem with the power cord.

Symptoms of a bad power cord include:

• Intermittent power supply or loss of power during operation
• Sparks, exposed wires, or fraying along the cord
• Inability to turn on the mixer  

Replace your faulty power cord with this genuine OEM part to restore your stand mixer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This spacer washer helps set and maintain the correct spacing between mating components. It cushions contact points to reduce wear, noise, and misalignment for smoother, longer-lasting operation.

• Maintains accurate spacing between parts for proper alignment
• Helps reduce friction and metal-to-metal wear
• Can quiet rubbing or squeaking from misaligned components
• Useful when play or uneven gap causes intermittent performance issues

• Disconnect power and, if applicable, shut off gas before servicing
• Note the original washer's location and orientation for reassembly
• Inspect mating surfaces for wear or debris and clean before installation
• Do not force parts together; verify proper fit and stack-up thickness

This replacement power cord supplies electrical power from the household outlet to the appliance. Swap a frayed, heat-damaged, or loose cord to restore safe, reliable operation and prevent intermittent power loss.

• Delivers AC power from the outlet to the unit
• Common symptoms include no power, intermittent shutoff, tripped breaker/GFCI, burning odor, or visible cuts/fraying
• Replaces cords with cracked insulation, loose/bent blades, or heat discoloration
• Helps maintain proper grounding when installed as originally routed

• Disconnect power and verify the outlet is de-energized before servicing
• Photograph wire routing; transfer connections one at a time to match the original
• Install/secure the strain relief; route the cord away from sharp, hot, or moving parts
• Test for normal operation after reassembly