Kitchenaid Kdtm404kps 0 Parts

The Pump and Motor is an OEM part for Whirlpool dishwashers. It is the central water distribution component tasked with pumping water through the dishwasher at various pressures to circulate water, spray contents, and rinse away food particles during cycles. Without a functioning pump and motor, the dishwasher cannot clean or sanitize dishes.

Symptoms of a bad pump and motor include: 

• Dishes not receiving sufficient water spray during the wash cycle
• Inability to drain or fill the dishwasher properly 
• Loud knocking or knocking sounds emanating from the pump area
• Leaks in or around the pump housing

Causes can be a failed motor, worn impeller, or cracking and leaks in the plastic pump body itself due to age and constant use. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

This factory fastener replaces a worn, stripped, or missing screw to securely hold appliance components in place, restoring proper fit and reducing vibration, noise, and loosening issues. It helps maintain alignment and safe operation of the affected assembly. What it does:

• Secures panels, brackets, or internal components as designed for the appliance
• Maintains assembly alignment for reliable performance
• Helps prevent rattling or vibration from loose hardware
• Replace when the original screw is missing, corroded, stripped, or damaged

• 1 screw

• Disconnect power; for gas- or water-connected appliances, shut off supply before servicing
• Match the screw to its original location and retain any spacers or clips used with the original
• Start threads by hand to avoid cross-threading; use the correct driver size
• Tighten until snug; do not overtighten to avoid stripping threads

The Top Spray Arm is an OEM part for Whirlpool dishwashers. It serves an important role on the upper rack, directing a spray of water across dishes during the wash cycle to thoroughly clean all surfaces. As a rotating component, the top spray arm endures constant motion which can cause wear over time.

Causes of a bad top spray arm include deterioration or cracks in the plastic from extended use, or blockages that restrict water flow.

Symptoms of a bad top spray arm include:

• Incomplete cleaning of upper rack dishes
• Buildup of food debris or grime that won't rinse away
• Noticeably weaker spray pattern from the arm nozzles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Filter Screen is an OEM part for Whirlpool dishwashers. As a key filtration component, the filter screen traps food particles and debris to prevent clogs and ensure optimal water circulation during wash cycles. It is responsible for filtering out contaminants and protecting internal pump components from damage.

Symptoms of a bad filter screen include:

• Reduced or uneven water pressure during wash cycles  
• Puddles or pooled water inside the dishwasher
• Food debris caught in the pump or other areas  
• The dishwasher fails to fill or drain properly
• Unusual noises emanating from the dishwasher

Causes of a bad filter screen can include clogging over time due to accumulated food waste and mineral deposits or damage such as cracks or tears in the screen material.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

This genuine replacement door handle restores a solid, comfortable grip for opening and closing your appliance's door. Replace a cracked, loose, or missing handle to keep daily use safe and the appliance looking factory-clean. What it does:

• Provides the handhold needed to open and close the door
• Transfers pull force to the door without stressing the latch
• Helps ensure the door can be operated safely and consistently
• Common symptoms: handle cracked, broken, loose, spinning, or missing

• 1 door handle

• Disconnect power before servicing; allow hot surfaces to cool
• Protect surrounding surfaces; support the door if required by your model
• Access the mounting screws as directed by your service manual; note screw locations and any spacers
• Tighten screws evenly without overtightening; wear cut-resistant gloves

This dishwasher rack tine row replaces a damaged or missing row of tines, restoring proper spacing to hold dishes upright. It improves spray coverage, reduces item-to-item contact, and brings back the rack's original loading layout.

• Provides vertical supports to separate plates, bowls, and lids for consistent cleaning
• Replaces a bent, broken, or rusted row that allows items to tip or nest
• Helps reduce rattling and potential chipping during wash cycles
• Common symptoms: dishes falling over, poor cleaning where tines are missing, visible damage to the row

• Turn off power to the dishwasher before servicing and pull out the rack for access
• Release the old row from its retaining clips; note clip orientation
• Transfer reusable clips/hardware if needed and snap the new row in until fully seated
• Reinstall the rack and confirm the row locks in place and holds items securely

This replacement screw secures appliance panels, brackets, and internal components. Install it when original hardware is missing, stripped, or corroded to restore a solid, factory hold and help stop vibration, rattles, and misalignment.

• Provides secure attachment for covers, brackets, and assemblies
• Replaces missing, damaged, or rusted hardware
• Helps resolve loose panels, buzzing/rattling noises, or shifting parts
• Supports proper alignment and reliable operation when tightened correctly

• Disconnect power; shut off gas/water if applicable before service
• Match thread and length to the original; replace in the same location
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• If washers, spacers, or threadlocker were present originally, transfer or replace them

The Sump is an OEM part for Whirlpool dishwashers. It houses the dishwasher's motor and pump assembly, responsible for circulating water and ensuring effective cleaning of your dishes.

A bad sump can occur due to wear and tear, clogs, or damage caused by foreign objects. If you notice issues such as water not draining properly, leaks, or unusual noises during the dishwasher cycle, it may indicate a problem with the sump.

Symptoms of a bad sump include:

• Water not draining or draining slowly from the dishwasher
• Leaks or water pooling at the bottom of the dishwasher
• Unusual noises such as grinding or rattling sounds

Replace your faulty sump with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool dishwashers. It secures the sliding dishwasher rack at the rear of the tub.

Symptoms of a faulty stop clip include:

• Dishes shifting position or toppling during cycles of motion  
• Noisy clattering heard from partially-restricted rack movement
• The dishrack failing to fully retract or extend 

Over time, repeated force from dish impacts can bend the thin metal clip out of place. Fatigue causes it to lose retaining strength.

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

The Panel Toe is an OEM part compatible with GE dishwashers. It is a discreet metallic strip located along the bottom front panel of the appliance. The toe provides protection and reinforcement to this high-impact area.   

Causes of a bad panel toe include normal wear from opening and closing the dishwasher door hundreds of times each year. Misalignment from door impact can also cause premature deterioration.

Symptoms of a bad panel toe include: 

• Visible cracking, bending, or detachment of the toe strip
• Potential for other panel issues if toe integrity is compromised
• Possible denting or distortion of neighboring surfaces
• Aesthetic issues and reduced protection of front panel edges

This genuine GE replacement part restores the structure and helps prevent further damage. Compatible Dishwasher models also include some Hotpoint, Profile, and Kenmore units.
 

The Retainer is an OEM part for Whirlpool dishwashers. It securely holds the top spray arm in place underneath the dishwasher interior roof panel.

Causes of a bad retainer include cracking, breaking or deforming from repeated use and natural wear over time.

Symptoms of a bad top spray arm retainer are:

• Loosening or detachment of the upper spray arm during washing cycles
• Reduced or uneven water coverage for upper rack dishes
• Potential rattling or noise from an unsecured spray arm

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement capacitor stores and releases energy to give an AC motor the phase shift it needs to start and run smoothly. Installing a fresh capacitor can help when a motor hums, struggles to start, or cycles off. What it does

• Provides the phase shift/starting torque an AC motor needs and stabilizes operation
• Helps reduce repeated start attempts and nuisance thermal trips
• Common symptoms of a weak capacitor: motor hums, won't start, or stops shortly after starting
• Physical signs of failure can include a swollen, leaking, or cracked casing

• 1 capacitor

• Disconnect power to the appliance before servicing
• Safely discharge the capacitor with an appropriate resistor/discharge tool before handling
• Mark/photograph wire locations and transfer connections one-for-one to the new part
• Reinstall in the original bracket or mounting location; keep wiring secure and clear of moving parts

This factory screw secures components in your appliance to keep them properly mounted and stable during operation. Replacing a missing or damaged screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Fastens panels, brackets, or trim to maintain correct alignment
• Can address rattling, vibration, or loose/misaligned parts where this screw is used
• Helps prevent wear from movement caused by missing or stripped hardware

• Unplug power and shut off utilities before service
• Note original screw location and orientation; replace like-for-like
• Do not overtighten—start by hand to avoid cross-threading
• Address threads before installing the new screw

The Insulation is an OEM part for GE dishwashers. It is located inside the dishwasher tub and helps maintain optimal temperatures during the wash cycle. The insulation forms a barrier that minimizes heat transfer between the tub interior and exterior cabinet walls.  

Causes of bad insulation can include cracks or compression damage over time. Excess moisture during washing may also cause premature breakdown.

Symptoms of a bad insulation include:

• Inability to efficiently heat or maintain water temperatures  
• Extended cycle times and higher energy usage
• Temperature fluctuation issues can trigger error codes
• Condensation or moisture inside the cabinet walls

This genuine OEM GE insulation restores the tub's optimal thermal properties. It is also compatible with some Hotpoint, Profile, and select Kenmore models manufactured for Sears. Replace yours now to optimize energy efficiency and washing performance.
 

This replacement screw secures appliance components, panels, and brackets. It restores a tight, reliable hold when an original fastener is missing or damaged, helping eliminate rattles, gaps, or shifting parts.

• Fastens two or more parts together inside the appliance
• Helps keep panels, brackets, or trim securely in place
• Can reduce vibration, rattling, or loose handles caused by missing/loose screws
• Replaces worn, stripped, or corroded fasteners

• Disconnect power and shut off water supply before servicing
• Match location and orientation to the original fastener
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to prevent stripping or cracking

The Inlet Hose is an OEM part for Whirlpool built-in dishwasher models. This hose delivers fresh water from the household supply to the appliance spray arms and pumps. 

Symptoms of a faulty inlet hose include:

• Leaks or drips around hose connections  
• Kinks or cracks in the supply line tubing
• Restricted or no water flow to critical systems
• Improper water levels causing wash performance issues

Causes can be deformation from tight bends over time. Mineral buildup inside the hose is also common with extended use. Accidental damage during plumbing work presents another potential cause.

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana dishwasher brands as well.