Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Air damper assembly for over-the-range microwaves. Installs at top exhaust opening to control airflow direction. Replace if cracked, missing, or broken.
Bought a new home with microwave venting into kitchen. Ordered damper assembly needed to vent through the wall to the outside. Removed microwave, followed directions in original installation instructions, turned fan over, cut hole in wall, installed wall cap and replaced oven. Problem solved. Read more
Template guides installation of over-the-range microwaves, ensuring correct cabinet alignment and hole placement. Replace if missing or damaged during install.
Watched a You tube video, showed how to remove bottom, unhook wiring, then proceed to top case. Once removed, case is turned upside down so the capture nut can be installed. Part fit perfectly and BAM, done. Case refitted and finished. Part arrived in 2 days. Great service. Read more
Replacement glass turntable tray for microwaves. Sits on support rollers to rotate food during cooking. Order if original is cracked, chipped, or broken.
Ordered a new one cheaper from you than whirlpool Read more
Microwave won't heat but hums loudly? The diode regulates power to the magnetron. Test with multimeter—reads one direction only. Moderate DIY repair.
Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more
Plastic cover that protects the waveguide opening in your microwave cavity. Replace if melted, burned, cracked, or damaged from food fires or splatters.
Ordered replacement from AppliancePartsPros.com was exact fit, just snapped into place. Read more
This small spring is part of the door interlock system in your microwave, providing tension to the safety switch mechanism that detects whether the door is properly closed. It ensures the microwave will only operate when the door is securely latched. Replace this spring if the microwave does not start, runs with the door open, or the door interlock switch is not engaging correctly.
Checked switch with a voltmeter, determined the switch was bad. Ordered a new switch....watched a short how to you-tube video.....and from there.....it was fixed. Read more
Fix a microwave that won't start or run with the door closed. This door interlock switch assembly monitors the latch for safe operation. DIY-friendly.
Replaced door interlocks … and it worked !! Good guess !! Read more
Microwave turntable won't rotate or makes rattling noise? This motor drives the glass tray for even heating. Easy 10-minute DIY fix with basic tools.
Obtained the replacement motor and tray coupler from Appliance Parts Pro. Video of the typical replacement was very helpful to show what to expect and how to replace the motor and coupler. The removal of the bottom plate was held in place by several phillips screws. The motor was attached with two torx screws. The electric connection clips to the motor required needle nose pliers to pull them off. The tray coupler was simple to install after the motor was secured and bottom plate was replaced.. Read more
This is the main electronic control board that manages the microwave's functions, including relay switching for the magnetron, turntable, and other components. It processes input from the touchpad and controls cooking cycles. Replace this board if the microwave is unresponsive, displays error codes, runs intermittently, or if certain functions stop working.
Replaced the Electronic Control. Read more
Plastic spacer that fits between the microwave door handle and outer case to maintain proper spacing. Replace if cracked, broken, or missing.
This is a light lens cover that fits over the surface light bulb housing on the underside of an over-the-range microwave. It protects the light bulb and diffuses light onto the cooktop below. Replace this cover if it is cracked, yellowed, missing, or if it no longer snaps securely into place.
When the new bulb didn't want to go in, I felt around and realized the base of the old bulb was still in there. With some effort I got it out and new bulb in, Light cover fit fine, but did not come with a screw to hold it in. That would have been helpful. Read more
Includes brackets, screws, and fasteners for secure microwave installation. Replace missing, lost, or incomplete hardware from floor models or clearance units.
Best price & easy shopping experience. Products were shipped the same day and are exactly as ordered. Took my scratch & dent (70% off) to a perfect new unit. Read more
Supports the glass tray and enables smooth rotation in your microwave. Replace when worn, cracked, or causing noise to restore even heating. Confirm fit.
...Because the little latches break off the ring. Having made that embarrassing discovery, there was little to be done except order a new Ring-Turn for my Whirlpool microwave. Happily, you had the part in stock, and the one I received is a perfect fit and appears to be a bit more sturdy than the one included with the microwave from the factory. The fix was to open the box, take the glass turntable out of the microwave, remove the broken part, put the new Ring-Turn in place, put the glass... Read more
Black grill vent cover for microwave and microwave/hood combo units. Installs over the filter area. Replace if cracked, broken, or won't sit flush.
I identified the name of the part from the manual diagram, typed it into AppliancePartsPros.com, double-checked the model to make sure it would fit (thank you, thank you for provide that double-check feature, which I'm sure has saved many other customers the trouble of shipping back the wrong parts and reordering the right ones), found a "how to" video on youtube, and set to work. I ended up having to replace the grill vent as well as the two filters behind it, because part of the grill vent... Read more
Replacement cooking rack for microwaves. Restores the elevated surface for two-level cooking. Replace if missing, bent, cracked, or flaking chrome finish.
Ordered a rack and two grease filters and they were there just what I needed. Read more
Plastic support ring that holds and rotates the glass turntable in your microwave. Replace if cracked, broken, or wheels are damaged or missing.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.