Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
Replacement crisper drawer for your refrigerator's produce compartment. Restores organized storage for fruits and vegetables when original is cracked or broken.
Grey decorative cap that covers the water filter housing on side-by-side refrigerators. Replace if cracked, broken, or missing for a finished look.
I replaced the pads on my Kitchenaid side-by-side. I was able to order ones that looked exactly like the old ones. It was even easier than what I had seen in a YouTube video. Read more
Fix a refrigerator that clicks but won't cool with this compressor start device. Simple 5-10 minute DIY repair restores cooling to both compartments.
After watching a few videos on this site and on You Tube it seemed like the most likely culprits were the starter and the capacitor. I found them easily behind the back panel near the compressor and easily unplugged them. I found the part numbers on this site and ordered them. After a 5 minute installation the compressor came back to life, and my 10 year old refrigerator has a new lease on life. Read more
Replaces a worn or broken door closing cam thimble in your refrigerator hinge assembly. Restores the smooth ramp action needed for proper door movement.
The Fan Motor is an OEM part for Whirlpool refrigerators. Located inside the fresh food or freezer compartments, it circulates cold air evenly throughout interior shelves and bins.
Symptoms of a bad fan motor include:
Causes can be normal wear over many years of operation, failure of electronic speed controls, or accumulated debris inhibiting smooth fan rotation.
This Whirlpool OEM replacement will restore the air circulation needed to maintain consistent temperatures. It is also compatible with Maytag, Jenn-Air, Amana, KitchenAid, and some GE side-by-side models for a seamless repair that prolongs your refrigerator's performance.
This bracket is the structural support that secures a mating component inside the appliance. Replacing a damaged or missing bracket restores a tight, aligned fit so parts stay in place and operate without excess vibration or noise. What it does
After removing the trim panel I discovered the tabs on the mounting panel/bracket that held the switch were broken so I knew I needed a bracket and I suspected the switch was bad as it had noticeable scoring on one of the contacts. Watching the online video repair confirmed my diagnosis. I ordered the bracket and panel on Monday night. Both parts arrived on Wednesday and I replaced both in less than 15 minutes. Total cost, with regular shipping that arrived in two days was less than $50. It... Read more
This mounting screw secures the freezer door handle to the door panel, ensuring the handle remains firmly attached. Replace it when the screw becomes stripped, corroded, or lost, causing the handle to become loose or fall off.
Rather than fighting the set screw, I ordered a new handle and extra parts to fix it. My father taught me to use anti seize which I used on all the threaded materials. Appliance parts and all the parts listed easy to see and Order Read more
Replacement support stud that holds refrigerator shelves securely in place. Needed when original peg is broken, cracked, or missing from shelf wall.
Myself Read more
Compressor clicking on and off every 5 minutes? Freezer warming up? This inverter control board regulates compressor operation in modern refrigerators.
Replaced the inverter box. Read more
The Hinge-Door is an OEM part for Whirlpool refrigerators. The refrigerator door hinge is a crucial component that allows the door to properly open and close while securely holding it in place. These hinges are responsible for smooth and reliable door operation through thousands of openings and closings.
Causes of a bad hinge can include wear and tear from prolonged use, stress from overloading the door, or accidental impact damage.
Symptoms of a bad hinge include:
This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Secures the bottom grille to your refrigerator frame. Replace if the original clip is cracked, broken, or missing and the grille won't stay in place.
Easy fixes, but I did what one of your video clips Read more
Clear plastic door cover for the dairy or butter compartment on your refrigerator door. Replace cracked, broken, or missing lids. Installs in minutes.
Ordered new compartment door and replaced it in about 2 minutes. Suggest that owners of similar refrigerators move the compartment one notch down on the door so when the compartment door is left open and the refrigerator door is closed the comp. door does not come into contact with the refrig. interior light housing. Used kitchen knife blade to disengage hinge on either side of the compartment. This website was the only one I could find that had a cross index good enough to find my... Read more
Fix ice dispenser grinding noises and jams with this lower ice crusher bin. Supports crusher blades and restores smooth crushed-ice dispensing.
Easy to remove the metal parts from the old bin. The only problem was that the screw that holds the adapter has red thread locker and screwdriver rounded off the head of the screw. Drilled the screw and heated the screw to loosen the thread locker and used an ease out to remove the screw. Read more
Connects inlet valve to water system in your refrigerator. Replace if cracked, kinked, or leaking at connections to restore leak-free water flow.
Water line coming out of inlet valve to ice maker was cracked. Removed the paperboard cover from the bottom of the back of the fridge, then unplugged the water line going from the inlet valve to the ice maker. Wasn't sure this new tube was going to work, because the original had an elbow on it. Fit just fine. Removed grille from front and disconnected other end of ice maker water line. Attached new line and now I have ice! Read more
Replaces worn or broken refrigerator door hinge cam. Restores smooth door pivot and secure closing. Essential when cam is cracked or door misaligns.
I ordered the door hinge cam kit, both the hinge, lower and upper cam. I followed videos found on the web. I would recommend taking the refrigerator door off by removing the upper hinge bracket and lifting the door off the lower hinge. It was much easier to replace the hinge and cam with the door off. One video suggested using Di-electric grease to lubricate the cam surfaces. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.