Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the worm gear and drive shaft in your stand mixer. Replace if the pin is missing, bent, or has fallen out, preventing proper rotation.
Originally I thought the worm gear had gone bad - the most common problem when the mixer head won't turn. Got a new worm gear and took extraapart the mixer (followed the instructions in an online video tutorial). The worm gear was fine! The problem turned out to be that the small metal pin that secures the worm gear and drive shaft together was missing (?). Don't know where it went or if it was ever there in the first place, but without it the drive shaft and worm gear do not work together... Read more
Wire whip attachment for 5-quart stand mixers. Beats egg whites, whips cream, and aerates light batters. Replace if bent, rusted, or worn. Confirm fit.
Replaced old parts added new ones. So excited. My 26 year old kitchen aid is functional and amazing. Read more
Speed control lever cracked or broken? This mixer speed control lever restores speed adjustment. Simple 15-minute repair with basic tools.
After ordering the speed lever, I watched one of the videos about disassembling the mixer. I followed the instructions pretty much to the letter except I found I spent more time cleaning and air dusting around the motor to get the accumulated flour dust out. The insides of the mixer haven't been touched in 30 years. About the most difficult part of disassembly was the 4 screws holding the mixer head to the stationary base. these screws have beveled cuts designed to lock the screws in place, I... Read more
Replacement thumb screw for stand mixer power hub. Secures beater, whisk, and dough hook attachments. Replace if cracked, broken, or missing.
Fix mixer stuck at one speed or won't turn off. This speed link connects to the speed control mechanism. Common DIY repair, takes 30-45 minutes.
Found the broken parts upon disassembly. Ordered new parts. Parts were shipped very quickly. Read more
Small flat washer used in KitchenAid stand mixer assemblies. Provides proper spacing and load distribution between fastened components.
Watched videos available on APP's website, then ordered all necessary parts. Once parts arrived, just followed the videos again, step-by-step, to repair the mixer. I am NOT a "handyman", but with APP as my resource, I did it. Mixer running great now. Read more
Replacement lift arm for stand mixers. Supports and raises/lowers the mixing bowl. Replace if cracked, broken, or won't stay in raised position.
I followed the online tutorials, there are many....replaced the PLASTIC part that had worn out Part #: AP4325266 (241764), and also the roll pin, Part #: AP3038054 (9703442) that held it in place with the handle. THIS IS THE HARDEST part of the entire repair, pounding out the roll pin and pounding it back in. A special tool should probably be used for this. I had a small specialized driver bit that "fit" for the job, so I abused it. Probably didn't need to BUY a NEW roll pin, ( it HAS be... Read more
If your stand mixer bowl won't lock or stay in place during mixing, this latch spring secures the bowl properly. Easy 5-minute fix with just two screws.
Called Kitchenaid but part was not available. Called appliance parts and they had the $5 part in stock. Old part attached with two screws that I removed. Installed clip and the two screws. $300 mixer fixed in 4 days. Read more
Replacement spring for stand mixer control plate assembly. Maintains tension between speed control lever and plate. Needed when broken, missing, or worn.
Small rubber sealing washer that prevents leaks at hose and pump connection points. Not a hardware flat washer — this is a functional seal component despite its small size.
This hub cap covers the attachment port at the top of your stand mixer. Replace if cracked, missing, or broken. Simply unscrew and snap on.
I WENT ONLINE AND ORDERED THE PART ON A TUESDAY. IT WAS DELIVERED BY FED EX ON WEDNESDAY. GREAT SERVICE. Read more
Pouring shield attaches to the top of your stand mixer bowl to prevent ingredient splatter during mixing. Replace if cracked, broken, or missing.
Replaces a worn or stripped shaft-and-pinion assembly in your stand mixer. Installs in the geartrain to transfer motor rotation to driven components.
The multiple YouTube videos available made it a pretty straight forward step-by-step repair. Not all parts were in stock. They each shipped separately, but I got them all within a 2 week period. Process went pretty smoothly. However, when I first was diagnosing, I took the motor brushes out to check their wear, and did not put them back in until I had all the gears replaced and the mixer back together. Be careful, the brushes fit only a certain way. I had them oriented wrong, and the mixer... Read more
Hardware washer/spacer used in KitchenAid stand mixer assembly. Provides proper component spacing and secure mounting.
For most 20-year-old KitchenAid Blenders the grease packed inside begins to break down into UCK and oil which will drip through the old gaskets. After breaking down the case and removing all of the old grease and oil I cleaned all the gearing and shafts. I replaced the case gasket, the 2 shaft gaskets that the lower orbital gear slides up, and then the o-ring on the main shaft after everything was installed. I did a break-in run on med speed for one hour and then tapped the chrome ring off... Read more
Spacer washer maintains proper spacing between mixer gearcase components. Replace if cracked, worn, or missing to restore correct alignment and operation.
REPLACED WORM GEAR AND OTHER GEARS SHOWING WEAR Read more
Replace your worn dough hook if yeast dough isn't kneading properly or sticks to the attachment. Non-stick coating ensures smooth mixing and easy cleanup.