Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Protective cap that mounts on the motor shaft to deflect water and prevent moisture from reaching motor windings. Replace if cracked or missing.
Usually ships within 4 - 14 days
This dishwasher tub roller wheel supports and allows smooth movement of the lower rack. Replace if worn, cracked, broken, or causing uneven rolling.
Black frameless outer door kit for dishwashers. Replaces cracked, chipped, or faded exterior door panels. Installs on front of dishwasher door.
Optional accessory. Color: White.
Replacement overfill standpipe for your dishwasher. Installs in the tub assembly to prevent water overflow. Order a new standpipe if cracked or broken.
Seals the pump housing to prevent water leaking from the tub onto the motor. Replace if you see leaks around the circulation pump area. Confirm fit by model.
1. To fix the leaks from around the door, I replaced the upper and lower door seals. These were purchased in a separate transcation, so they are not the parts shown here. The upper door seal worked as intended, but the lower seal would not stay in place on the lower edge of the door during a wash. Therefore I cleaned the grease and detergent off the old seal, and installed using silicone sealer/adhesive. The plastic edge pieces for the lower seal were supplied with the kit, and they installed... Read more
I followed Matt's awesome video from AppliancePartsPros.com to build up my "I can do this" reserves. But here's the story leading up to that point... We purchased our Samsung WF419 on a “Black Friday” special November 2009 expecting to get some good years out of the washer/dryer pair. We don’t run more than 2 or 3 loads a week in the washer, so ours has had relatively little use over the beginning of its anticipated and expected long life-cycle. When the “thumping” started on the spin cycle a... Read more
The Latch Switch Kit, an OEM Replacement Part is designed to ensure the safe operation of your Whirlpool dishwasher. The kit includes two microswitches and a wiring harness. It prevents the appliance from running when the door is open. If defective, the door switch may prevent the dishwasher from operating even when the door is closed.
Causes of a bad door switch can include wear and tear, exposure to moisture, or a broken actuator.
Symptoms of a bad door switch include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I ordered the Door Switch Kit, along with a few other items. However, the switch kit was all that was needed. Isimply followed the instructions that came with the kit. It was necessary to cut the wires which connected to the wire assembly in the door of the dishwasher. I then connected the pieces from the switch kit and then connected the end pieces to the door. I closed the door, and started up the dishwasher. It worked as well as before. Read more
The Door Gasket is an OEM part for Whirlpool dishwashers. This gasket is essential for maintaining the efficiency and safety of your dishwasher, ensuring that water is contained within the unit to avoid kitchen floods and water damage.
Causes of deterioration can include regular wear and tear from opening and closing the dishwasher door, exposure to harsh detergents and high temperatures, and physical damage from loading and unloading dishes.
Symptoms of a bad Door Gasket include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Replaced door lower seal and door gasket. Read more
Cleared out trash from pump. Made E-Z by your exploded views and videos. Replaced worn parts. Read more
This no-flip clip snaps onto a dishwasher rack tine to hold lightweight items in place so they stay upright during the cycle. Replace a broken or missing clip to keep cups, lids, and small bowls from tipping and improve cleaning results.
Ordered new inlet water valve and float switch kit. After repairs it now works fine. However the water inlet valve outlet end for fill hose (not water source) and wire connections (supposedly for this unit) were oriented 180 degrees opposite. I had to gently remove the blue plastic valve off the metal support bracket and turn it around and press back in place. Fortunately it appears it was designed for either orientation. Also the solenoid had to be unclipped and also rotated. Again it was... Read more
Color: white. It measures about 1-1/2 inches high by 2 inches deep.
First I ordered new dishracks from KitchenAid/Whirlpool. However, they don't make the "flex row" tines anymore and there was, therefore, a big "hole" in the dishrack that arrived. I could fit a large pot in the space, but no dishes (they'd fall through). KitchenAid and Whirlpool don't even sell the parts anymore. But, to the rescue comes AppliancePartsPros.com. I was able to order the correct parts and put them in with no difficulty, once I viewed the very handy video. Thank you so much. ... Read more
Color: Black. Includes insulation. Other colors: For almond use WP3384157, for biscuit use WP3384157, for white use WP3379921.