Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.
My son fixed the issue of some wear and tear. Read more
Fix dishwasher overflows and leaks with a new float assembly. Controls water level to prevent overfilling. Moderate DIY repair with video guide.
Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more
Standing water or dirty dishes? A clogged or damaged pump inlet screen blocks debris from the wash system. Simple DIY fix restores drainage and cleaning.
Looked at Dishwasher. Scratched head and armpit. Told wife I would fix, not repariman. Wife skeptical - shook head. Found schematic on web. Found YouTube video of guy repairing same DW model. Disassembled. Diagnosed problem. Chopper assembly welded in place by water scale -broke removing. Potty mouth. Ordered parts. Waited for parts. Washed dishes by hand. Wife doing ok. Parts arrived (in only a day or two!!! Fed Ex for 7 bucks!! Great deal). Put on nasty t-shirt, baggy shorts. ... Read more
Gray plastic pivot clip for dishwasher upper rack tine rows. Replaces broken, cracked, or missing pivots that prevent tines from adjusting properly.
With the basket out of the dishwasher, the plastic parts basically snap on and off... popped the broken parts off and the new parts on. The 2 wheel and mount assemblies were a little more complicated. The video on the website advises to disconnect the supply line and drain line... I didn't have to do this. I just pulled the dishwasher out of its cabinet a little over a foot and removed the 2 screws holding each assembly in place and removed them. The previous gaskets (2 PER ASSEMBLY)... Read more
12 Ft in length
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more
This bracket mounts inside the dishwasher tub and supports the middle spray arm manifold tube, holding it securely in position. It ensures the spray arm tube stays aligned so water is properly distributed during the wash cycle. Replace this bracket if the middle spray arm wobbles, falls out of place, or if dishes on the upper rack are not getting clean due to poor water coverage.
Installed new part Read more
Replaces damaged dishwasher dishrack wheel assembly. Installs on upper or lower rack for smooth rolling. Needed when wheels crack or tabs break.
Ordered wheel assembly. Received in a couple of days. Easy FIT project. Problem solved. Read more
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
This genuine replacement door handle restores a solid, comfortable grip for opening and closing your appliance's door. Replace a cracked, loose, or missing handle to keep daily use safe and the appliance looking factory-clean. What it does:
Replaced the older handle with the new on I ordered. Read more
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Fix rinse aid leaks or dispenser issues with this dishwasher rinse aid cap. Seals the reservoir to prevent evaporation and ensure proper dispensing.
Got a new one Read more
Adjustable manifold that connects the upper rack to the rear water feed tube. Replace if cracked, punctured, corroded, or missing the seal probe.
Replace the entire assembly, manifold, spray arm with seal and water probe. Took 5 minutes. Problem solved! Read more
Replacement upper spray arm for dishwashers. Installs on the top rack level to restore water distribution. Replace if cracked, clogged, or broken.
This is a 12 year old Kenmore, but my experience applies to many dishwashers. The machine had run for almost a year without being cleaned. I found parts had failed from age and water passages were jammed with hard-water deposits and pieces of food, labels, etc. that had gotten past the filters. I cleaned out what I could and replaced parts that could not be cleaned or were damaged. Dishwasher now works better than it has for years. The work, including ordering parts, took about 4 hours, but... Read more
Color: gray. It measures about 1-1/2 inches in diameter.
I bought a new home and with it came a Jenn-Air dishwasher. I noticed after using the appliance and filling the rinse aid container that where was no cap to hold/seal the rinse aid within the appliance or anywhere to be found. I was missing.! I was going to call Jenn-Air to inquire about this part, instead I searched online first and found it at Appliance Parts Pros.com. I ordered the part, it arrive to my home in less then 2 days and it fit! This is the easiest repair I've ever done and... Read more
Gray plastic retainer clip that secures folding tines in your dishwasher's lower rack. Replace if cracked, broken, melted, or missing from rack assembly.
To eliminate ordering parts that are working, I went to hardware store to get a multimeter to test and confirmed the continuity of the themal fuse and the door switches are working. Saw another reviewer post a similar problem and I went with the solution by replacing the panel-ctl. Ordered the part, replaced it after receiving the delivery package, turned the breaker back on, ran a test cycle, et voila, it works as new. Sidenote, to reset the dishwasher, I pushed " hi-temp dry, "energy... Read more
Set screw secures dishwasher door handle to panel. Replace if missing, stripped, or corroded to restore tight handle mounting and prevent loosening.
Extremely easy. All the parts were included, including the necessary tool to remove the old and secure the new. Awesome!! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.