Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Lat2600aee Parts

Laundry Center Mounting Bolt
Genuine Whirlpool part
By: Whirlpool
Part Number: W10175939

Mounting bolt secures the tub and internal components in your laundry center. Replace if stripped, rusted, or missing to restore stable assembly fit.

Do-It-Yourself Stories from Customers like You Washer was leaking water from the tub seal area.   David D. • San Diego , CA • October 11, 2020

Purchased and installed new tub bearing and seals. Decided to replace the tub bolts as well, since I had it apart. Now if I could just find a new outer tub (which the manufacturer has discontinued). Appliance parts pros has a great "how to" video which made it simple! Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Inlet Hose Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY013783

This is a rubber gasket that sits inside the water inlet hose connection on your washing machine. It creates a watertight seal between the hose fitting and the water supply valve to prevent leaks. Replace this gasket if you notice water dripping from the hose connections at the back of the washer.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Pretty much everything   Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

More
$6.72
Compare At:
$8.06
You Save:
$1.34

IN STOCK
Ships Today Guaranteed
Add to Cart
Strainer & Washer Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001413

Hose washer and plastic insert for inlet hose. To order separately: for washer use WPY013783, for strainer use WP22002960.

Do-It-Yourself Stories from Customers like You Pretty much everything   Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

More
$6.60
Compare At:
$7.85
You Save:
$1.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Lug Stop (Movement Stop)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP211089

Replacement lug stop that limits movement of a mechanical component to prevent over-travel and reduce wear. Restores proper stopping action so doors or internal mechanisms operate more smoothly and safely. What it does:

  • Stops or limits travel of a moving part to prevent over-rotation or over-extension.
  • Keeps doors, lids or internal linkages from swinging past their intended position.
  • Replace if the lug is cracked, worn, broken, missing, or if the mechanism fails to stop or rattles.
  • Helps prevent further damage from metal-on-metal contact or excessive movement.
What's included: Replacement lug stop. Install notes:
  • Disconnect power before starting any repair.
  • Basic hand tools and access panel removal may be required to reach the mounting area.
  • Inspect adjacent clips, fasteners and mating surfaces; replace any damaged hardware.

Do-It-Yourself Stories from Customers like You Lip seal was leaking oil which is at the part of the transmission housing shaft.   Gary B. • Hamilton , OH • April 07, 2017

I emailed appliancepartspros.com with what my problem was and they informed me what was wrong they gave me a part number to order, tools needed and a brief explanation how replace the seal. they also have online video's for different repairs. I watched the video for lip seal(part # 207843) replacement.I also had to remove the brake assembly in order to replace the seal so I watched that video also. I went online and got the part numbers for items I needed to make my repairs.Just follow the... Read more

More
$7.48
Compare At:
$8.98
You Save:
$1.50

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$9.05
Compare At:
$9.38
You Save:
$0.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Spacer Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-2114830

This small spacer washer fits in the washer's drive assembly to set the correct clearance between mating parts. Proper spacing helps components rotate smoothly and quietly while minimizing metal-to-metal contact and premature wear.

  • Maintains the specified gap and alignment within the drive/brake or pulley stack
  • Helps reduce friction, rubbing, and vibration
  • A worn, distorted, or missing spacer can contribute to scraping or grinding noises and excess play
  • Often replaced during service of related drive components to restore correct stack order
What's included: 1 spacer washer. Install notes:
  • Disconnect power before servicing; shut off water if moving the appliance
  • Access and procedure vary by model—refer to your unit's service manual or parts diagram for the correct stack order
  • Support the appliance if working from below; remove belt/pulley or related parts as required
  • Reassemble in the exact order and orientation; verify free rotation before test-running

Do-It-Yourself Stories from Customers like You Washer would only spin.   Byron V. • Bellevue , MI • February 04, 2020

Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Tension Spring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP213720

Tension spring restores proper movement in washer mechanical assemblies. Replace if parts sag, rattle, or don't return to position. Confirm fit by model.

Do-It-Yourself Stories from Customers like You Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped   Eugene N. • Roswell , NM • August 28, 2016

The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Selector Knob
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001663

Replace your cracked, stripped, or missing selector knob. Attaches to the control shaft to choose wash cycles and options. Restores smooth operation.

Do-It-Yourself Stories from Customers like You Broken knobs   Billy P. • Moultrie , GA • June 07, 2015

Orde red replacement Read more

More
$54.25
Compare At:
$64.56
You Save:
$10.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Lower Collar (Plastic)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002341

This lower plastic collar is a small retainer that keeps mating components aligned and secure within the assembly. Replacing a worn or broken collar restores proper fit, reduces play, and helps prevent rubbing or noise during operation. What it does:

  • Acts as a keeper/retainer to hold parts in position on a shaft or hinge point
  • Maintains spacing and alignment between moving components
  • Helps reduce wobble, scraping, or squeaking caused by excess play
  • Replaces collars that are cracked, deformed, or missing
What's included:
  • 1 lower plastic collar
Install notes:
  • Disconnect power and, if applicable, shut off water before servicing
  • Support the assembly to relieve load before removing the old collar
  • Match the original orientation; press/seat the new collar fully and evenly
  • After reassembly, check for proper alignment and smooth, quiet operation

Do-It-Yourself Stories from Customers like You The agitator shafe came out of the transmission   James H. • Umatilla , OR • February 16, 2015

I had to take the cover off of the transmission to see how the shaft was held in place. After discovering there is a plastic clip that holds the shaft in place i ordered the parts. replaced the shaft and the put the new plastic clip in place, made my own gasket and then put the transmission cover back on. easy fix and saved a lot of money. Read more

More
$0.71
Compare At:
$0.84
You Save:
$0.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (12-14 X 1/2)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP27001200

This 12-14 x 1/2 screw is a factory fastener used to secure appliance panels, brackets, and components. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and keeps parts properly aligned for reliable operation.

  • Secures panels, brackets, and internal components to their mounting points
  • Replaces damaged, rusted, or missing hardware
  • Helps stop vibration and rattling caused by loose fasteners
  • Restores proper alignment and stability of covers or assemblies
What's included: One screw Install notes:
  • Disconnect power and, if applicable, shut off gas/water before servicing
  • Match the original screw's location and length; replace one at a time
  • Start threads by hand to prevent cross-threading; tighten snugly without over-torquing
  • Reinstall any original washers, clips, or spacers used with the screw

Do-It-Yourself Stories from Customers like You My pump belt broke   Steven H. • Harleysville , PA • June 15, 2015

This was a very easy fix. Two screws to get the front off of the washer. Removed one side of the tensioner spring. Loosened two screws for the motor and two screws for the pump. I decided to replace the agitate belt even though it wasn't broken.. So, I removed that belt from the pulleys and the removed the broken belt. then just reversed the process to install the belts. it toke me less than 30 minutes and my washer was back in service. Read more

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw, Single
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10346892

This factory screw secures appliance components such as panels, brackets, and trim. It replaces missing, stripped, or damaged hardware to restore a tight, rattle-free fit and proper alignment in the specified location for your model.

  • Fastens covers, panels, brackets, or trim as specified in the parts diagram
  • Restores secure fit when an original screw is missing or damaged
  • Helps reduce vibration, rattling, and looseness
  • Direct-fit hardware specified by the manufacturer for the original location
What's included: One screw. Install notes:
  • Disconnect power and shut off water/gas before servicing
  • Verify the screw's location in your model's parts diagram before installation
  • Start threads by hand to avoid cross-threading; tighten snugly without overtightening
  • Use the correct driver/bit and avoid overtightening into plastic to prevent stripping

Do-It-Yourself Stories from Customers like You I purchased 2 whirlpool xhp1550vw pedestals on clearance and one was missing the screws and pads   Evelyn D. • East Moriches , NY • March 03, 2015

By ordering the screws and pads from appliancepartspros.com which were delivered practically overnight! The service was beyond expectations! Read more

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Nut
Genuine Whirlpool part

Nut

By: Whirlpool
Part Number: WP3400029

Size: 10-32

Do-It-Yourself Stories from Customers like You The heating elements were not working, but there was power on the control panel.   Miroslav R. • Petaluma , CA • May 08, 2020

Check the power cord connection to the stove and found burned cable due to loose connection. Replaced the terminal and the nuts and installed a new power cord. Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Adjusting Nut (Eyebolt)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP211949

This adjusting nut threads onto an eyebolt to set and lock an adjustment point. It helps maintain proper tension or alignment in the mechanism so the appliance operates smoothly without the setting drifting over time. What it does:

  • Threads onto an eyebolt to fine-tune and secure an adjustment
  • Helps prevent vibration from loosening the setting
  • Replaces a stripped, rounded, or missing nut so adjustments hold
  • Visual cues for replacement include damaged threads or worn hex flats
What's included:
  • 1 adjusting nut
Install notes:
  • Disconnect power; turn off water or gas supply if applicable
  • Components attached to eyebolts may be under spring or mechanical tension—support and relieve tension before removal
  • Mark or measure the original setting to match during reassembly
  • Start by hand to avoid cross-threading; tighten securely without over-torquing

Do-It-Yourself Stories from Customers like You May tag washer bumper pads wore out   Larry W. • Hookstown , PA • November 18, 2014

I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick Read more

More
$5.95
Compare At:
$7.14
You Save:
$1.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: 8534058

Replacement mounting screw for securing panels, brackets, and components in dryers, refrigerators, and washers. Needed when screws are lost or stripped.

Do-It-Yourself Stories from Customers like You Knob was not turning / changing to correct heating selections   Michael H. • Coral Springs , FL • August 03, 2016

This was the perfect replacement part and once installed it fixed itself. Thank you! Read more

More
$9.10
Compare At:
$9.46
You Save:
$0.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (Mounting)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY313561

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

  • Fastens panels, trim, or mounting brackets to restore proper alignment
  • Helps eliminate rattling or vibration caused by loose or missing screws
  • Replaces corroded or damaged hardware to maintain safe operation
  • Restores secure attachment for parts that no longer hold in place
What's included: One mounting screw Install notes:
  • Disconnect power to the appliance before starting any repair
  • Use the correct driver bit to avoid stripping the screw head
  • Tighten until snug; avoid overtightening which can strip threads or damage parts

Do-It-Yourself Stories from Customers like You 40+ year old Maytag washer quit agitating.   Marcus G. • Fresno , CA • June 11, 2022

Used Google to research issues. We ordered a new motor and springs. Installed and washer running like new. Read more

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Nut-Lock (Locking Nut), 1 Count
Genuine Whirlpool part
By: Whirlpool
Part Number: WP210385

A replacement nut-lock used to secure fasteners and keep panels or components from backing off due to vibration. Simple, durable hardware that restores a secure connection and reduces rattling or loose parts. What it does:

  • Secures a mating bolt or stud to prevent loosening from vibration or movement
  • Restores a solid attachment for panels, brackets, or assemblies that may come loose
  • Helps eliminate symptoms such as rattling, vibrating, or intermittent panel movement
  • Suitable where a locking fastener is required to maintain a reliable connection
What's included: One nut-lock. Install notes:
  • Disconnect power and follow appliance safety procedures before starting work
  • Locate the matching stud or bolt and remove the old fastener if present
  • Use the correct-size wrench or socket and tighten until the nut-lock seats; avoid over-tightening
  • Inspect threads and mating hardware for damage; replace damaged components

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer   Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store