Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.
My son told me that almost all the microwave ovens that came into the repair center he worked at, 15 years ago, had a defective magnetron. I ordered a magnetron, and sat back until one shipped. The one that came, the first time, was in a small factory cardboard box, which was in a large bubble-pak Fedex envelope; which didn't show any signs of abuse. Inside, however, the factory box was beat up. Removing the magnetron, I noticed that the socket, as well as its' pins, was bent, and loose in the... Read more
The Time Delay Fuse is an OEM part for LG microwaves. This fuse provides a safety mechanism by delaying the flow of electricity, protecting the microwave's electrical components from power surges and ensuring the appliance operates safely. It helps to prevent immediate damage in the event of a power surge or electrical fault, thus prolonging the lifespan of the microwave.
Over time, the time delay fuse can become damaged due to electrical surges, wear and tear, or faulty connections. If the fuse blows, it can disrupt the microwave’s ability to function correctly.
Symptoms of a bad time delay fuse include:
This OEM LG part is also compatible with Sears/Kenmore models.
Called AppliancePartsPros because of good experiencing diagnosing problem with a dishwasher repair. We definitely are modest income amateurs! Same excellent response to our questions. Three possible causes. Used easy search menu to fine replacement parts. Bought all three, knowing that if all not needed, the others could be returned (within 365 days) for refund. Replaced the capacitor successfully after calling to get more help with a couple of places where we got stuck. Oven now works... Read more
Replaces a cracked, chipped, or broken glass turntable tray inside your microwave cavity. Typically damaged during cleaning or accidental impacts.
Pretty easy fix. Took out 7-8 screws to remove cover for access to light. 2 were security type screws so I had to run to the hardware store to buy a special screwdriver. One screw to remove the bulb. Read more
Fix a microwave that runs but won't heat with this high voltage diode. Converts AC to DC power for proper heating. Typical DIY repair in under 2 hours.
I am not an appliance repair man. I am a general surgeon. I went online and researched the problem. The consensus was that my magnetron and diode were the most likely culprits. To replace my microwave with a comparable model would have cost at least $800. The diode and magnetron cost around $170. I watched a few videos on YouTube demonstrating how to do the repair safely and I felt like I could do it. I ordered the parts on a Monday evening and had them Wednesday. The only difficult part of... Read more
Microwave not heating but still running? The magnetron controls heating function. DIY repair in under 2 hours with basic tools and multimeter testing.
Microwave won't turn on or has no power? A blown fuse is often the cause. This safety component protects against electrical surges and short circuits.
I have a Jenn-Air microwave that didn't turn on and had no lights. It just stopped working completely. I unplugged the unit and had to remove the rear cover using a *security screw kit* that prevents people from opening the rear panel. Once opened, I removed the fuse and testing it with an OHM reader to determine that the fuse went bad. But I also had to determine why the fuse blew and noticed a sticky oily substance under the Capacitor. I used a rubber glove and needle nose pliers to... Read more
Microwave won't turn on or has no power? A failed thermostat often causes complete power loss. Moderate DIY repair requires disassembly to access.
I checked for the reasons there was no power to the microwave. Then I talked with the technician at AppliancePartsPros who stated that it was most likely a blown or defective fuse. My LG microwave has two thermal fuses, a fuse assembly with two prongs and a short (1 inch) barrel type fuse. I replaced all of them after viewing YouTube videos and then reviewing the diagram for my microwave on the AppliancePartsPrps website. That was very helpful in locating where the fuses were installed. It... Read more
Microwave glass turntable tray. Color: clear. Measures about 13 inches in diameter.
Put a new one in. Read more
This is an incandescent light bulb designed for use inside a microwave oven cavity. It illuminates the interior so you can monitor food while cooking. Replace this bulb if the interior light no longer turns on or flickers intermittently despite having a good socket connection.
The tray was an easy fix as I looked up Kenmore Microwave and ordered the replacement. The light bulb was a little trickier as to replace it you must have a special screwdriver that has a 5-pointed bit with a hole in the middle. This is because nothing else is safely serviceable on the microwave. I unplugged the microwave and moved it to my kitchen table to do the work. The entire outside case had to be removed to access the light bulb which is on the upper right side. You must unplug the... Read more
Replacement screw secures panels and components in your microwave. Install when original hardware is stripped, rusted, or missing to stop rattles.
Links the door button to the latch mechanism for smooth opening. Replace if your lever is cracked, broken, or worn to restore reliable door operation.
Microwave making a loud humming noise or won't heat? A faulty capacitor is often the cause. Requires cabinet removal and safe discharge. Restore function.
Replaced the Magnetron, Capacitor, and the Diode. Able to repair $1400 microwave with parts that cost $218.54. Thank you ApplianceParts Pros. Watched trouble shooting videos on Youtube and found that these parts needed to be replaced. Read more
Microwave won't start when you press the button? This door interlock switch confirms the door is closed so cooking can begin. Fixes no-start issues.
Changed all door switches and used rubber eraser to clean connections on touch panel ribbon cable. Read more
This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:
Button spring for microwave control panels. Replace when buttons feel unresponsive or stick. Verify your model number for proper fit before ordering.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.