Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Connects dishwasher door to tub with cables and springs for controlled opening and closing. Replace if cable is broken, frayed, or snapped.
We knew at least one door hinge cable assembly or hinge spring was broken (the door started falling down rapidly and became heavy to close) so we ordered two of each since we had read to go ahead and replace the damaged items on both sides. While we were waiting on the order, the other side must have broken-the door became incredibly heavy and instead of falling open, started crashing down unless it was carefully lowered. We feared it would fall on one of our animals and kill them. We did not... Read more
Dishwasher not draining or leaving standing water? This drain pump removes water during drain cycles. DIY-friendly repair with basic tools in under an hour.
First determined drain discharge hose was clear. Turned of power to dishwasher. I did not find it necessary to remove the dishwasher. I simply removed the lower service panel at the floor and was able to easily remove the defective pump, unplug it, replace the small rubber check valve flapper before the pump inlet and reinstall the new pump assembly. The dishwasher surprisingly cleans and runs quietly like new again although I found no excuse for the pump failure as it is well designed. Never... Read more
The Diverter Motor Assembly is an OEM part for LG dishwashers. It is a critical component used to control the direction of water flow within the dishwasher, ensuring that water is properly diverted between the different spray arms during various wash cycles.
Symptoms of a failing Diverter Motor Assembly include:
Causes of a bad diverter motor can include wear and tear from regular use, electrical issues such as faulty wiring or motor failure, and mechanical obstructions or debris that prevent the diverter from moving smoothly.
This OEM LG part is also compatible with Sears/Kenmore models.
I ordered a new vario motor and a soap dispenser. I turned off the water and the breaker, disconnected the water line and the power at the front base of the unit, disconnected the drain hose from the garbage dispenser, and pulled out the dishwasher and laid it on a blanket on its face. I unscrewed and removed the plainly visible vario motor on the bottom of the machine and removed the cam from the shaft. I then used a needle nose plier to carefully turn the D-shaft on the new motor to exactly... Read more
Replacement drain hose assembly for dishwashers. Directs used water from the tub to your drainage system. Replace if cracked, leaking, or brittle.
Replaced the water supply valve and the drain dump valve. The drain hose had to be replaced also. Read more
Replace your dishwasher's nozzle assembly if it's broken, cracked, or keeps falling off. Installs on the spray arm to direct water during wash cycles.
I ordered the sprayer arm (nozzle assembly) and guide assembly. It took about five minutes to remove the old and install the new. Very simple and fixed the problem. Read more
Hinge spring for dishwasher doors. Attaches to door hinge mechanism to provide proper tension for smooth opening and closing. Replace if worn, stretched, or broken causing door to slam or not stay open.
The Dishwasher Inlet Valve is an OEM part for LG dishwashers. This valve controls the flow of water into the dishwasher, opening to allow water in at the start of the wash cycle and closing to prevent any further water entry once the desired level is reached. It ensures that the dishwasher receives the correct amount of water for optimal cleaning performance.
Causes of a bad inlet valve can include mineral deposits or debris clogging the valve, electrical issues, or general wear and tear from prolonged use. A malfunctioning valve can lead to improper water levels and potential flooding.
Symptoms of a bad dishwasher inlet valve include:
Replacement roller for dishwasher lower rack. Installs on the dishrack axle to enable smooth gliding. Replace if cracked, broken, or missing.
Ordered the part and snapped it on. Read more
Seals the cam motor shaft to prevent water leaking into motor and electrical components. Replace if you notice leaks around the motor area or water damage.
This was a very simple repair. It was done in about an hour. It involves disconnecting the dishwasher, emptying the water from the inside, taking it out and flipping it over, and replacing the diverter motor. This repair is done on the underside of the dishwasher, nothing to disconnect inside (just remember to remove the baskets). It would be wise to order the motor seal and micro switch that goes with it as they are all cheap parts and easy to swap out during the procedure. Be sure to take... Read more
Seals dishwasher door to prevent leaks, contain heat and moisture. Replace if water escapes, steam leaks, or seal is cracked. Verify fit by model number.
Replaced the door gasket. Read more
The Guide Assembly is an OEM part for LG dishwashers. It directs water from the pump to the middle spray arm, ensuring that water is evenly distributed to clean dishes effectively on the upper racks.
Causes of a bad manifold guide can include wear and tear, accumulation of debris, or damage from heavy items in the dishwasher. A malfunctioning manifold guide can lead to poor cleaning performance and inefficient water distribution.
Symptoms of a bad middle spray arm manifold guide assembly include:
The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment.
Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter.
Symptoms of a bad Noise Filter Assembly include:
This OEM LG part is also compatible with some Kenmore models.
Searched the web and determined it was something called a noise filter. Ordered the part from ApplianceParts Pros. Received it in about 3 days, normal shipping. Replaced the part. Took about 15 minutes from start to finish. Problem solved. Cost less than $50. Read more
Replacement silverware basket for your dishwasher's lower rack. Holds cutlery during wash cycles. Replace if cracked, broken, or has holes in bottom.
The Upper Rack Assembly is an OEM part for LG dishwashers. This part provides a durable and efficient space for washing glasses, cups, and smaller dishes. This assembly maximizes the cleaning capacity of your dishwasher, allowing for the organized placement of items to ensure they are thoroughly cleaned and dried.
Causes for issues with the upper rack assembly often involve prolonged exposure to water and detergent, leading to rust or corrosion, physical damage from loading or unloading, or wear and tear from regular use.
Symptoms of a malfunctioning Upper Rack Assembly include:
The new racks just slide into the slot spaces easily. The new items seem redesigned better than the factory original. Read more
Fix HE or tE error codes and dishes not drying properly. This dishwasher heating element assembly heats water for washing and drying. Moderate DIY.
Replaced heating element, Read more
Dishwasher dishrack roller and axle assembly. Installs on upper or lower dish rack to allow smooth gliding. Replace if broken, cracked, or missing.
Thanks to Appliance Parts Pros, who took the time and made the effort, they found me a replacement part for my dishwasher. Read more