Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Creates a watertight seal to prevent leaks in your dishwasher. Replace when worn or cracked to stop water damage. Confirm fit with your model number.
Mounting bracket that secures dishrack components in place inside your dishwasher. Replace if cracked, broken, or missing to restore stability.
I bought a new controller first and installed it. The exact replacement controller was no longer available and I had to modify two AC connectors that changed from 3 pins with two wires to two pins with two wires. This was not expected but I made it work just fine by getting the three pin connectors on the cable to fit the two pin by breaking out the center web in the board two pin and then shaving off the raised key plastic on the wires. Then on power up, I found that the wash motor did not... Read more
This is a protective cover that fits over the electrical terminal block or wiring connections on a dishwasher. It shields the wiring and electrical connections from moisture and accidental contact, ensuring safe operation. Replace this cover if it is cracked, broken, or missing, as exposed electrical connections pose a safety hazard.
Replacement rack rail assembly for dishwashers. Guides and supports dish racks for smooth sliding. Needed when rails are cracked, broken, or worn.
Replaces the front cabinet frame that provides mounting surface for door components. Needed when original frame is cracked, bent, or damaged.
Secures and pivots the dishwasher door for smooth opening and proper alignment. Replace if your hinge is broken, cracked, or worn to restore stability.
Color: gray. Measures about 1 inch high by 4 inches deep.
Replace your dishwasher's hose assembly connector if cracked, leaking, or damaged. This connector attaches hoses to ensure proper water flow in your unit.
Positions and supports the spray nozzle on the rack, aligning it with the water feed port. Replace if cracked, broken, or causing spray arm misalignment.
I replaced the upper nozzle guide, nozzle shaft and upper spray arm. I also replaced the pump gasket for good measure. Top rack dishes had not been cleaning properly. I first removed the filter assembly to inspect the main pump from above. It was clogged but after cleaning and reassembly I observed that while middle and bottom spray arms were changing position, the upper spray arm was not. I confirmed that water was flowing through the upper spray arm by placing some empty yogurt pots on a... Read more
Protective cover cap for dishwasher installation. Replaces cracked, broken, or missing caps. Ensures proper coverage and protection of components.
Replacement rack rail assembly for your dishwasher. Guides dish rack smoothly in and out. Replace when cracked, broken, or causing rack misalignment.
Base cover assembly for dishwashers. Installs at the bottom to protect internal components. Replace if cracked, damaged, or missing for proper coverage.
Mounting bracket secures the dishwasher tub assembly. Replace if bracket is cracked, broken, or missing to restore proper tub support and alignment.
The Blower Motor Assembly is an OEM replacement part for LG dishwashers. Located inside the wash cavity, it functions to distribute heated air throughout during the dry cycle. Rapid rotation of the blower motor blades works to eject moisture from dishes and ensure thorough drying.
Causes of a bad blower motor include failure of the motor itself, cracks in the blades that disrupt airflow, or bearing issues preventing proper rotation.
Symptoms include:
It is also compatible with some Kenmore dishwashers using LG components.
The solenoid that opened the air vent for drying was broken so it was open during the wash cycle allowing water to escape into the air duct. Found the part at SearsParts and AppliancePartsPro, and Sears was $15 more expensive. I ordered on Friday from AppliancePartsPro and selected standard shipping and the part arrive the next day (Saturday). Amazing service. AppliancePartsPro will be my first stop in the future. Read more
Usually ships within 4 - 14 days
Fixes weak spray or slow draining caused by a worn impeller. Restores water circulation in your dishwasher. Moderate DIY repair with video guide.
I replaced the dishwasher circulation motor. I also replaced the impeller assembly, although it turns out that was not necessary. Actually replacing the motor was straightforward: Remove the upper and lower racks. Turn off the breaker and water supply. Disconnect power, supply water and drain hose. Slide out the dishwasher. Inside the dishwasher, unscrew the two screws holding on the bottom rotating sprayer and remove the sprayer, unscrew the one screw holding the little metal bracket and... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.