Lfbd409lboa Parts

The Inlet Valve is an OEM part for Frigidaire dishwashers. This valve is essential for controlling the flow of water into the dishwasher, ensuring the appliance receives the correct amount of water during the wash and rinse cycles. The inlet valve operates by opening and closing in response to electrical signals from the dishwasher's control board, allowing water to fill the dishwasher tub at the appropriate times.

Symptoms of a failing Inlet Valve include:

• The dishwasher not filling with water at the start of a cycle
• Water entering the dishwasher slowly or inconsistently
• The dishwasher overfilling or leaking
• Unusual noises such as buzzing or humming during the filling stage
• Water remaining in the tub after the cycle is complete

Causes of a bad inlet valve can include mineral buildup from hard water, which can clog the valve, wear and tear on the valve components over time, or electrical issues that prevent the solenoid from functioning correctly.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Rack Assembly is an OEM part for Frigidaire dishwashers. It holds silverware securely in place during the cleaning and drying cycles. This basket measures approximately 16.88" X 8" and has two lids. Please Note: This assembly no longer comes as 3 separate pieces and is now 1 piece.

Causes of a bad basket assembly can include regular wear and tear, damage from overloading or mishandling, and degradation from prolonged exposure to water and detergents. Clips, holders, or the basket frame may break or wear out over time, affecting its functionality.

Symptoms of a failed rack assembly are:

• Silverware shifting positions or falling during cycles
• Difficulty loading or removing dishes
• Rust or flaking of the protective coating
• Noise or rattling from a loose or damaged rack

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This trap is a molded drain fitting used in select Frigidaire-built appliances. It helps keep water flowing in the correct direction while limiting backflow of air and debris, supporting proper drainage and reducing leaks or odors when the original fails. What it does

• Creates a water seal in the drain path to reduce backflow and odors
• Guides condensate or wash water toward the drain pan/outlet for proper removal
• Helps protect internal components by limiting debris entry into the drain path
• Common symptoms of a bad trap: slow or no draining, water pooling/leaks, unpleasant odors, or visible cracks/warping

• 1 trap

• Disconnect power and, if applicable, shut off the water supply before servicing
• Access the drain area per your model's service/owner documentation; place towels to catch residual water
• Note hose routing and trap orientation; transfer and securely reinstall any clamps or seals
• After reassembly, run a small amount of water through the system to check for leaks

The Dishwasher Drain Hose is an OEM part for Frigidaire dishwashers. It is crucial for safely channeling waste water from the dishwasher into the drain system, preventing backups and leaks. This flexible hose is designed to withstand the rigors of regular use, including exposure to hot water and detergents, ensuring a reliable path for effluent without risk of damage under normal operating conditions.

Symptoms of a bad Dishwasher Drain Hose include:

• Water pooling around the dishwasher,
• Signs of leakage at the connection points,
• A musty smell indicating standing water in the hose.

Causes of drain hose failure often involve cracks or punctures, which can occur with age or if the hose is improperly installed or subjected to external pressure.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Detergent Dispenser Assembly is an OEM part for Frigidaire dishwashers. This assembly is responsible for dispensing detergent and rinse aid at the appropriate times during the dishwashing cycle, ensuring that dishes are cleaned and rinsed effectively.

Causes of a bad detergent dispenser assembly can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process. Over time, these issues can compromise the dispenser's functionality.

Symptoms of a bad detergent dispenser assembly include:

• Improper dispensing of detergent or rinse aid
• Residual detergent left in the dispenser after the cycle
• Dishes not being cleaned properly
• The dispenser door not opening or closing correctly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It operates as the central "brain" of the dishwasher, controlling functions like cycle selections, wash and rinse levels, heating elements, and input/output sensors.

Causes can be circuitry failures, moisture damage over time, or physical stresses from vibration.

Symptoms of a bad control board include:

• Cycle failure or inability to start or complete washing
• Temperature or input/output sensor malfunctions
• Fault codes appearing or strange appliance behavior
• Unresponsive buttons or input failures

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This base is the lower cabinet support that helps keep the appliance stable and holds internal components in their correct position. Replacing a damaged base restores proper fit, alignment and reduces cabinet movement. What it does:

• Provides structural support for the appliance cabinet and mounting points
• Keeps internal components aligned and maintains correct clearance
• Helps prevent rocking, vibration and gaps at the bottom of the cabinet
• Protects lower components from contact with floor-level debris or uneven surfaces

• Disconnect power and, if applicable, water before beginning work
• Access may require removing the toe kick or lower access panels
• Keep track of mounting screws and brackets; use replacement hardware if original fasteners are corroded

The Rail End Cap is an OEM part for Frigidaire dishwashers. This small but essential component is designed to fit at the end of the dishwasher rack rails, preventing the racks from sliding off the rails when pulled out for loading or unloading. The end caps also help to protect the dishwasher’s interior walls from scratches or damage that might occur if the metal racks were to come into direct contact with them. 

Symptoms of a failing rail end cap include:

• Dishwasher racks sliding off the rails
• Difficulty pulling racks in and out smoothly
• Noticeable damage or scratches inside the dishwasher

Causes of rail end cap damage typically involve physical stress from frequent use, accidental breakage during loading, or degradation of the material over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Frigidaire handle and latch assembly is an OEM replacement part responsible for securing and latching the dishwasher door when it is closed for a wash cycle. This part is typically located on the front panel of the dishwasher, near the top of the door. It ensures that the dishwasher door remains securely closed during operation, preventing water and steam from escaping the interior.

Causes of a bad handle and latch assembly can include repeated use leading to wear and tear, accidental damage from forceful closing or opening, or internal mechanical failures. If the assembly is compromised, the dishwasher may not start, or it could leak during cycles.

Symptoms of a bad handle and latch assembly include:

• Difficulty in opening or closing the dishwasher door
• The door not latching properly
• The dishwasher not starting or pausing mid-cycle
• Water leakage from the door during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. It is designed to hold dishes, glasses, and other items in the upper section of the dishwasher, allowing for efficient and organized cleaning.

Causes of a bad Upper Rack Assembly can include wear and tear over time, damage from heavy or improperly placed items, or issues with the rollers and tracks that allow the rack to slide in and out smoothly.

Symptoms of a bad Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• The rack falling off its tracks
• Rust or corrosion on the rack
• Broken or missing tines that hold dishes in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Latch Assembly is an OEM part for Frigidaire dishwashers. It is designed to securely fasten and anchor the dishwasher door during active cycles.

Causes relate to typical stresses from normal opening and closing motions. Regular cleaning chemicals like rinse aid may also degrade latch parts faster.

Symptoms of a faulty latch assembly can include:

• The inner door popping open unexpectedly during washing or drying
• Difficulty fully closing or sealing the door shut
• Improper adhesion or alignment of door gaskets and seals
• Damage or wear to connecting latch components over time

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Heating Element Nut is an OEM part for Frigidaire dishwashers. It plays a crucial role in securing the heating element in place, ensuring it functions effectively to heat water during the wash cycle. This component ensures the stability and proper operation of the dishwasher's heating element, contributing to the machine's overall efficiency and performance.

Causes of a bad part can include physical damage during maintenance or installation, corrosion over time due to exposure to water and detergents, or general wear and tear that affects its ability to securely hold the heating element in place.

Symptoms of a bad Heating Element Nut include:

• Loose heating element, leading to inefficient heating or water not heating at all
• Water leakage from the heating element area, potentially caused by a poor seal
• Unusual noises during the dishwasher cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Dishwasher Door Spring is an OEM part for Frigidaire dishwashers. It helps to balance and support the weight of the dishwasher door, allowing it to open and close smoothly and safely. The spring ensures that the door remains stable at any angle, preventing it from dropping too quickly or not staying open. This spring, 8" in length, is sold individually. 

The door spring may need to be replaced if it becomes worn out, stretched, or broken. Causes of a bad door spring can include frequent use, excessive force when opening or closing the door, and general wear and tear over time.

Symptoms of a bad dishwasher door spring include:

• The door dropping open quickly
• Difficulty in keeping the door open at various angles
• The door not closing properly
• Unusual noises when opening or closing the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This flapper valve is the dishwasher's one-way drain check. It directs wastewater out and helps prevent backflow into the tub, promoting complete draining and reducing standing water, odors, and water returning after the drain cycle.

• Maintains one-way water flow from the sump/pump to the drain hose
• Helps prevent backflow from the sink or air gap into the dishwasher tub
• Wear, warping, or sticking can lead to slow draining or water left in the tub
• May also present as water backing into the tub after a cycle or intermittent drain faults

• Disconnect power and turn off water supply before servicing
• Access the valve at the drain outlet/pump area; note hose and clamp orientation
• Match the original valve orientation; the flapper should open toward the drain hose (direction of flow)
• After reassembly, run a short fill-and-drain test and inspect for leaks and proper draining

The Delivery Tube is an OEM replacement part for Frigidaire dishwashers. This tube is designed to supply water to the upper spray arm from the pump assembly. By doing so, it plays a role in ensuring that the upper rack of dishes receives adequate water coverage for effective cleaning. 

Causes for a malfunctioning Delivery Tube can include blockages from food particles or mineral deposits, general wear and tear from regular use, or damage incurred during maintenance or installation.

Symptoms of a bad Delivery Tube include:

• Inadequate cleaning of dishes on the upper rack
• Water not reaching the upper spray arm
• Unusual sounds during the wash cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Hinge Kit is an OEM replacement part for Frigidaire dishwashers. Located on the left and right side of the dishwasher doorway, the hinges are responsible for supporting the weight of the dishwasher door and facilitating smooth opening and closing. The kit is composed of two brackets and all of the extra hardware needed to install it on a dryer.

Causes of failure include wear and tear of hinge parts over many door openings and closings, damage due to overload or misuse, and deterioration of hinge components exposed to moisture.

Symptoms include:

• Loose or sagging dishwasher door
• Difficulty opening or closing the door
• The door does not stay securely closed during cycles
• Noises or squeaks emanating from hinge areas

This OEM replacement is also compatible with Electrolux, Kelvinator, and some Kenmore models.