Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.
The ice chute flap wasnt closing. 1. I turned off power 2, Pulled off facia around controls on freezer door,, you have to pull out the bottom part of the chute first , its clipped in 3. Disconnected the front panel 4. Unscrewed the next panel to allow access to the chute flap 5. Removed 1 screw holding complete flap and mechanism and replaced with new 6. Re installed all parts in reverse Problem was the chute flap had worn and was folding over on top edge when opened and then wouldnt return... Read more
Ice maker stopped producing ice or won't release cubes? This complete ice maker assembly fixes frozen, jammed, or non-working units. DIY-friendly repair.
All it really took to fix it was to take off 3 screws and loosen one larger screw. It really was that easy but it took a lot longer to do because we took out a lot of screws that we would not have needed too. Read more
Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.
There is one hinge on top and one at the bottom, but it was none of these it ended up being this hinge that I ordered. Door was having a little hesitation at closing, the door would not pull your hand to close or it would not closed by itself. replaced this part and the refrigerator was fixed. Read more
Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.
Your web site sent me the sensor. I watched the repair video that was excellent saved at least two hundred or more dollars.When I called Sears all they said was LG would not tell them what the error code was and they would send a repairman which would be $99 to show up plus parts and labor. Will always use your service! Read more
Seals the left refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or not sealing properly. Confirm fit.
Pulled gasket out of track and replaced with new one. Read more
Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.
Ordered new freezer arm Read more
Refrigerator door gasket creates an airtight seal to maintain temperature. Replace if cracked, torn, or compressed to prevent warm air leaks and energy waste.
Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.
Perfect Read more
The Mullion Flipper Assembly is an OEM part for LG refrigerators. This assembly, located between the refrigerator doors, helps seal the space between the doors when they are closed, improving energy efficiency by preventing cold air from escaping.
Causes of a bad mullion flipper assembly can include wear and tear over time, damage from frequent opening and closing of the doors, or issues with the hinges and connectors that secure it in place. A damaged or malfunctioning mullion flipper can lead to temperature inconsistencies and increased energy usage.
Symptoms of a bad mullion flipper assembly include:
This OEM LG part is also compatible with Sears/Kenmore models.
I searched online and easily found the best price for the Front Plate Assembly to be AppliancePartsPros.com. Even though I didn't pay for two day shipping, the part was shipped the next day and received the following day (Saturday), outstanding service. Installing the piece was quite simple, requiring removing two screws, slipping the old part off of two retaining clips and disconnecting one wire connector. Reverse this to install new part. Read more
Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.
Replaced filter with plug. Read more
Interior door basket assembly for refrigerator. Stores condiments, bottles, and small items on the door. Replace if cracked, broken, or missing.
Popped the broke one off and replaced it. Read more
Refrigerator won't cool or compressor won't start? This run capacitor provides the electrical boost needed for smooth compressor operation. DIY repair.
Unplugged frig to check connections, everything was ok. When I plugged it back in, nothing worked and the display and ice maker were flickering and clicking. Unplugged the display connector on the main board and could hear clicking from the main board itself. Replacing the main board and capacitor fixed it. I only replaced the capacitor as a precaution. it may not have been bad, but I did it for good measure. Everything is working great now and I don't have to buy a new refrigerator. Read more
Replacement glass shelf for refrigerator crisper drawer. Installs over vegetable/fruit compartment. Needed when original is cracked, shattered, or broken.
Removed replacement glass from box. Wiped clean with disinfectant. Set glass in shelf. Easy peasy. Read more
The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.
Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.
Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:
This OEM LG part is also compatible with some Kenmore models.
Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes. Read more
Refrigerator light won't turn off when door closes? This door switch controls interior lighting based on door position. Simple DIY repair.
Ordered 2 light switches and replaced them. Read more
Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.
Followed your on-line video. Not too hard to fix. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.