Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
Microwave turntable not rotating or making popping noises? This coupler connects the motor to the glass tray. Simple DIY fix takes under 15 minutes.
Replaced turntable motor and coupler Read more
This holder assembly secures the locker/latch mechanism in place so the door or access panel aligns and closes properly. Replacing a cracked or missing holder restores secure engagement and smooth, reliable operation. What it does:
Parts diagram indicated that the microwave door when closed, turned several switches on. I replaced all the parts that were associated with the door lock. Also while there, put in a new charcoal filter. Read more
The Compressor Overload Protector is an OEM replacement part for LG refrigerators. It plays an important safety role in protecting the compressor from damage due to excessive heat. Located near the compressor unit, the overload protector functions to shut off power to the compressor if temperatures become too high during operation. Causes can include normal wear over time rendering it less responsive to temperature changes. Mineral or refrigerant deposits may also impede its ability to detect overheating conditions accurately. Symptoms of a faulty overload protector include:
This OEM LG part is also compatible with some Sears/Kenmore models.
8 y/o LG unit was not cooling or freezing. There was a clicking on the back side every 2-3 minutes. Used these 2 issues in a internet search and top 2 cited problems were dirty coils then bad PTC & OLP. Tool off the back panel, compressor was quie hot. Coils did not look excessively dirty but cleaned them anyway. DId not resolve the problem. The OLP & PTC recommended for my unit. were different than the original TSD and I thought I would have to return the parts. However, I got on a chat... Read more
Creates an airtight seal to keep cold air in. Replace when worn, cracked, or leaking to restore stable temps and reduce frost. Confirm fit with model.
It was so simple, parts pulled out and installed the new parts 10 minutes very easy Read more
Rotating glass platform for microwave cooking. Replace if cracked, chipped, or broken. Sits on the turntable support for even food heating.
Glass turntable tray that rotates inside your microwave. Replace if cracked, chipped, broken, or missing to restore safe, even cooking and protect your oven.
They located a part for an 18 year old microwave Read more
Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.
Started off by replacing the water lines and valve, purchased from the same site. Thought I'd cured the problem, but no. Next step was to replace the icemaker, which is incredibly simple. Undo 2 screws, pop out the clips give the wiring harness a good tug and the whole lot comes out. Reverse the process to install the new one. In order to get the process going I pressed the test button on the underside of the unit. So far everything seems to be working properly. If you're having the same... Read more
Connects the turntable motor to the glass tray hub so it rotates during cooking. Replace this shaft coupler if it's cracked, worn, melted, or broken.
About 9 screws on bottom and 2 on the turntable. The most trouble I had was putting the bottom back on. Took about 15-20 min. Easy fix Read more
Turntable stopped turning or making noise? This microwave motor rotates the glass tray for even heating. Easy DIY fix with basic tools in under an hour.
I googled the make and model, and found the part on AppliancePartsPros.com. The underside of the oven has a metal grille with numerous openings of various shapes and sizes. There is a rectangle that is punched into this grille, just below the motor. I pried between the vent holes to snap the connections near the perimeter on the punched rectangle. I only did this on three sides. Then pry up the rectangle away from the connected side. Undid the hold down screw, separated the motor from the... Read more
This is a ring intended for use in refrigerators. The ring is used to adjust the height of the door. Genuine OEM replacement rings are necessary for the repair to ensure a proper fitting.If the refrigerator door no longer opens or closes easily, or if it is not sealing properly, the rings may need to be replaced. Visual inspection can determine if there are problems with the refrigerator door rings. Make sure to unplug the device before starting any of the disassemblies of the machine. Wear gloves.This ring is an authentic OEM replacement part. It is sold as an individual unit. The ring is made of high-quality, durable materials. The replacement piece is sourced directly from the manufacturer. It can be installed in several models of refrigerators. The genuine OEM replacement ring is compatible with refrigerators produced by both LG and Kenmore.
I was kind of guessing at the parts that I needed, but the parts diagrams were a huge help, and I narrowed it down to the bushing and stopper on the right door. I removed the door and was able to replace the parts pretty easily. Now the fridge door works good as new. Read more
Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.
I changed the compressor, dryer and upgraded the software. Read more
Right side upper hinge.
Replaced hinge. It was really just a snap and click on. Read more
Sleeve that fits over the hinge pin for smooth door pivoting. Replace when doors wobble, squeak, or don't align properly. Confirm fit with your model.
Bracket that mounts and aligns the door latch switches inside your microwave. Replace if cracked, broken, or clips are damaged from prior switch removal.
REPLACED THE DOOR SWITCHES HOLDER ASSY---LABELED HOLDER ASSEMBLY LOCKER, WHICH CAME WITH ALL 3 DOOR SWITCHES ALREADY MOUNTED IN THE HOLDER ASSEMBLY, IT WAS EASY TO REPLACE, JUST 2 SCREWS BUT YOU DO NEED TO PULL THE FRONT PANEL ASSY FORWARD BY REMOVING 1 SCREW AND LIFTING IT UP AND OUT WHOLE JOB TOOK ABOUT 1/2 HOUR appliancepartspros.com GAVE QUICK DELIVERY MUCH APPRECIATED BOB B. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.