Lmv 1630Ww Parts

This mounting plate is a metal bracket used to secure the microwave chassis/components in the correct position. A worn or damaged plate can cause poor fitment, vibration, or noise during operation.

• Provides a stable mounting surface for the designated microwave assembly
• Helps reduce vibration and rattling noises
• Restores proper alignment if the original plate is bent or broken
• Commonly replaced when the original plate is damaged or missing

• Unplug the appliance and discharge the high-voltage capacitor before servicing a microwave
• Use proper personal protective equipment; metal edges can be sharp
• Note orientation and fastener locations before removal
• Tighten mounting hardware evenly to avoid distortion

Color: brown. Measures about 10 inches in diameter.

The Thermostat is an OEM part for LG microwaves. This part monitors and regulates the temperature within the appliance. The thermostat ensures that the microwave does not overheat, automatically shutting off the power if the internal temperature exceeds safe levels. This preventive measure helps to avoid damage to the microwave and potential safety hazards in the kitchen. 

Causes of a bad thermostat can range from normal wear and tear, which may cause the component to lose its calibration over time, to overheating incidents that permanently damage its sensitivity.

Symptoms of a bad Microwave Thermostat include:

• The microwave unexpectedly turning off during use
• The microwave failing to start
• Inconsistent cooking temperatures or unevenly cooked food

This OEM LG part is also compatible with some Kenmore models.

This rivet assembly fastens panels, brackets, or covers inside the microwave cabinet. Replacing a damaged or missing fastener restores a tight fit, reduces vibration noise, and keeps mounted components properly aligned.

• Secures panels, brackets, or covers to the cabinet for a stable fit
• Use when a rivet is cracked, missing, or no longer holds
• Can help resolve rattling, buzzing, or loose panel movement
• Maintains proper alignment and support of mounted parts

• Disconnect power before servicing; support and remove over-the-range/built-in units for safe access.
• Microwaves contain a high-voltage capacitor that can retain a dangerous charge—service should be performed by qualified personnel.
• Reinstall using existing mounting holes; ensure the rivet is fully seated and secure.
• Wear cut-resistant gloves and eye protection to avoid injury from sharp metal edges.

This replacement door handle restores a secure, comfortable grip on your microwave door. Install it to fix loose, cracked, or broken handles so the door opens and closes smoothly and looks refreshed.

• Provides a sturdy pull point to open and close the door
• Replaces damaged or worn handles to maintain safe operation
• Helps resolve symptoms like a loose/wobbly handle, cracks, or difficulty opening the door
• Aligns with factory mounting points for proper fit and alignment

• Disconnect power to the microwave before servicing
• Access the handle screws from inside the door; carefully remove the inner trim to reach them
• Support the door and glass while working; avoid overtightening the screws
• After reassembly, verify the door latches and opens/closes smoothly

This replacement lamp socket holds the light bulb and provides a stable electrical connection so your appliance light works reliably. Replace a heat-damaged or loose socket to restore consistent illumination and help prevent flicker, arcing, and premature bulb failure.

• Secures the bulb and connects it to power
• Restores proper interior or work-area lighting
• Addresses flickering, intermittent light, or bulbs failing early from poor contact
• Replaces sockets that are cracked, melted, or discolored

• Disconnect power at the breaker or unplug before servicing
• Allow the area to cool; wear gloves and safety glasses
• Note wire positions and transfer one lead at a time to the new socket
• If servicing a microwave, access only the lamp area per your model instructions; do not open the cabinet—internal components can retain high voltage

This holder assembly secures and guides the door latch components so the door closes firmly and the safety interlock switches engage. Replacing a worn holder restores reliable latching and helps the unit start consistently.

• Supports and aligns the latch mechanism within the door
• Ensures door hooks engage the interlock switches for safe operation
• Helps prevent a door that won't latch or pops open
• Common symptoms: unit won't start or shows a door error unless you press on the door

• Disconnect power at the breaker before service; microwaves contain high voltage even when unplugged
• Remove the door, separate the inner/outer panels, and transfer the latch holder
• Reassemble carefully, verifying smooth latch movement and proper door alignment
• Test door closure and operation before returning to service

This humidity sensor assembly monitors moisture inside the microwave cavity during Sensor Cook and Reheat cycles, allowing the control to automatically adjust time and power. Replacing a failed sensor can restore accurate, reliable sensor-based cooking performance. What it does:

• Detects steam/humidity in the cavity for auto-sensing cook and reheat programs
• Sends feedback to the control board to adjust power levels and cook time
• Failure symptoms include sensor cook not starting, stopping early, "sensor" error messages, or inconsistent results on auto settings

• One humidity sensor assembly

• Unplug the appliance before service; microwaves contain a high-voltage capacitor that can retain a dangerous charge
• Handle the sensor face carefully and keep it clean; route and secure the wire harness as originally

This fan assembly moves air through the unit to cool internal components and maintain proper ventilation. Replacing a worn or seized fan restores correct airflow, helps prevent overheating, and reduces excessive noise from a failing motor or wheel.

• Circulates cooling air across internal components to prevent overheating
• Exhausts air through the vent/duct path for proper ventilation
• Common symptoms: fan not running, weak airflow, or loud rattling/squealing
• Unit may overheat or shut off during use when the fan fails

• Disconnect power before service; microwaves contain a high-voltage capacitor that can retain a dangerous charge—follow proper safety procedures.
• Remove access panels to reach the fan housing; note airflow direction and wire orientation.
• Transfer any brackets, grommets, or screws from the original assembly if required.
• After installation, verify the wheel spins freely and airflow direction is correct before reassembly.

This door latch assembly engages the interlock switches when the microwave door closes, keeping the door securely shut. Replacing a worn latch restores safe door engagement and allows the oven to operate only when properly closed.

• Hooks into the cabinet strike to hold the door closed
• Actuates the interlock switches to permit heating
• Helps resolve: door won't latch or stay shut, "Door/Open" error messages, unit won't start unless the door is pressed
• Replaces a visibly cracked, worn, or broken latch

• Unplug the microwave before servicing; microwaves contain high-voltage components—work only on the door, not inside the cabinet
• Remove the inner door trim to access the latch; note orientation and transfer any clips/hardware as found
• Inspect the door strike and hinges for wear; misalignment can prevent proper latching
• After reassembly, verify smooth door closure and that the oven will not run with the door open

This turntable coupler connects the microwave's turntable motor to the glass tray, rotating it for even, consistent heating. Replace a worn or cracked hub to restore smooth tray motion and reduce noise during cooking.

• Couples the turntable motor to the glass tray for even heating
• Replaces a worn, cracked, or stripped hub that prevents rotation
• Helps reduce tray wobble and scraping sounds from the center
• Common symptoms: tray not turning, intermittent rotation, clicking/grinding at the hub

• Disconnect power before servicing; microwaves contain high-voltage components
• Remove the glass tray and roller ring; lift the old coupler straight up from the motor shaft (some models may require access from below per instructions)
• Align the new coupler with the keyed motor shaft and press it fully into place
• Reinstall the roller ring and tray; verify smooth, centered rotation

This is the glass turntable tray for a microwave. It provides a stable, food-safe surface and rotates with the turntable system to help heat food evenly.

• Holds dishes securely while the microwave runs and rotates for uniform heating
• Replaces a cracked, chipped, or missing glass plate
• Common symptoms: tray wobbles, won't rotate properly, uneven heating, or visible damage to the plate
• Designed to fit the microwave's turntable coupler and support for smooth operation

• Unplug the microwave (or open the door to stop operation) and let the tray cool before handling
• Remove the old tray; align the new tray's center with the turntable coupler
• Ensure it sits flat and spins freely by hand before use
• Do not overtighten or force—tray should rest on the support/rollers

This replacement oven light bulb restores clear visibility inside the oven cavity. It brings back bright, reliable illumination so you can check doneness at a glance—using the door switch or light button—without opening the door or losing heat.

• Lights the oven cavity when the door opens or when the light button is pressed
• Helps you monitor cooking progress without interrupting cooking
• Typical symptoms: no light, intermittent flickering, dim light, or a blackened/broken bulb
• A failed bulb is the most common cause

• Disconnect power or switch off the circuit breaker; allow the oven to cool completely
• Remove the lens/cover per your model; unscrew or unclip the bulb from the socket
• Handle the new bulb by the base; avoid touching the glass on capsule/halogen styles
• Do not exceed the bulb type/wattage specified for your model; tighten gently and test operation

This part is the base for the small simmer burner on gas cooktops. It supports the burner cap and channels gas to the flame ports to promote consistent ignition and an even, stable flame. What it does

• Serves as the burner base for the auxiliary/simmer position
• Aligns and supports the burner cap for even flame distribution
• Routes gas from the orifice to the burner ports
• Common symptoms include weak or uneven flames, difficulty lighting with a known-good spark, or a cap that won't sit flat

• One auxiliary burner holder

• Disconnect power and shut off the gas supply before servicing
• Remove the grate and burner cap; take out mounting screws and lift off the old holder
• Transfer/reuse the orifice, igniter electrode, gasket, and hardware as applicable; seat the new holder evenly and tighten fasteners without over-torquing
• Restore gas and power; verify proper ignition and flame

This door interlock micro switch is part of the microwave's latch assembly. It detects when the door is fully closed so the oven only runs when latched, helping restore safe, consistent start/stop operation.

• Senses door-latch position within the interlock assembly
• Cuts power when the door opens; permits operation when fully closed
• Helps resolve "won't start" complaints or stopping when the door is jostled
• Often fixes the need to press or lift the door to keep the unit running

• Unplug the microwave before servicing; high-voltage components can retain a dangerous charge.
• Access the interlock/latch bracket behind the control panel; note switch orientation and terminal labels (COM, NO/NC).
• Transfer wires to the new switch, secure it in the bracket, and ensure the actuator aligns with the door latch.
• Reassemble and test with a cup of water to ensure proper start/stop operation.