Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lnc 6744A71 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Screw (Mounting)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10309247

Mounting screw used to secure panels, trim, brackets, and small appliance components. Replace a missing or damaged fastener to restore proper fit, reduce vibration, and keep parts aligned for safe operation. What it does:

  • Secures panels, control boards, brackets, and trim to maintain correct assembly
  • Replaces stripped, broken, or missing screws that cause loose or rattling parts
  • Helps prevent misalignment that can interfere with doors, knobs, or covers
  • Standard fastener interface — use the correct driver and size for a secure fit
What's included: One screw Install notes:
  • Disconnect power and/or gas and follow appliance safety procedures before servicing
  • Use the correct screwdriver or bit to avoid stripping the head
  • Do not overtighten; snug until secure to avoid damage to threads or surrounding parts
  • If threads are damaged, replace the mating component or use the correct thread-repair method

Do-It-Yourself Stories from Customers like You The upper agitator kept floating off   Brian T. • Pine Grove Mills , PA • October 02, 2018

New parts did the trick. Very easy to replace. Did not need to replace the base agitator, the fabric dispenser, or the screw; but, while it was apart it was simple to do. Read more

More
$48.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer High Limit Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1096

Dryer won't heat or overheats? This high limit thermostat cuts power when temperatures get too high. Common fix for no-heat issues. Easy install.

Do-It-Yourself Stories from Customers like You Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting   Timothy E. • Bellvue , CO • September 15, 2019

When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was... Read more

More
$54.25

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Lp Conversion Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63-6766

Converting your gas dryer from natural gas to liquid propane? This LP conversion kit modifies the fuel orifice and components. Typical install: 1 hour.

Do-It-Yourself Stories from Customers like You Broken belt on clothes dryer & conversion of another from NG to propane   Rick R. • Stringtown , OK • March 11, 2019

Simple fix with YouTube and kit, only trouble was FedEx loosing my package, APP quickly replaced it. Customer service was great with APP.com Read more

More
$35.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Drum Front Glide
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001470

Supports the front of your dryer drum for smooth rotation. Replace when you hear scraping noises or the drum wobbles. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You Scraping noise when drum turning has heat   John K. • Coatesville , PA • October 22, 2016

First time DIY dryer repair. Videos very helpful! Remove front. Found glides worn thin, paint on drum removed where glides located. Drum, cage and motor turned easily - must be OK. Thirteen year old dryer. Order glides & felt, might as well replace belt and rollers while there. First time order - could not have been easier! Received 2nd day. Replaced parts, reassembled & connected power. Ran for 3 minutes with scraping noise then stopped with burning odor. Disassembled dryer, smelled odor from... Read more

More
$52.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Drum Roller Shaft And Bracket Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-0197

This assembly includes the roller shaft and rear support bracket that holds a drum support roller in place inside the dryer. It allows the drum to rotate smoothly on its rear support rollers. Replace this part if the dryer is making squealing, thumping, or rumbling noises, or if the existing shaft is worn, bent, or seized.

Do-It-Yourself Stories from Customers like You Squeaking badly   Garth M. • Anson , ME • January 24, 2015

Replaced the roller and shaft. The roller had worn 1/4 of the way through the support shaft. Read more

More
$56.34

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Drum Front Glide Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001469

Supports the front of the dryer drum for smooth rotation. Replace if drum is noisy, wobbling, or causes overheating. Verify fit with your model number.

Do-It-Yourself Stories from Customers like You Very loud and not drying quickly   Robert C. • Harwood , MD • March 24, 2015

New glides, idler had a crack, blower retaining ring was gone. And a good clean out. Like new again for 2 hours and $77.00 Read more

More
$54.51

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Dryer Cycle Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1107

Fix a dryer that won't heat properly or overheats. This cycle thermostat regulates temperature during heating cycles. Easy DIY repair in under an hour.

Do-It-Yourself Stories from Customers like You Wouldn't run no power problem   Jan M. • Brewster , MA • February 02, 2016

I knew i had a bad thermal fuse when it wouldn't start, so i took it apart and noticed the belt was getting ready to break. i went online to your website and was able to get all the parts i needed at a good price, they said shipping would only take 1.7 days which actually turned into 5 but it was easy to fix once i got the parts. highly recomend them Read more

More
$54.25

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Elbow Union Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 3406051

 

Do-It-Yourself Stories from Customers like You I smelled a little gas each time i opened the dryer door i called the gas company and the service man found the nut on the union was split   Richard B. • Oak Creek , WI • April 11, 2015

A plumbing supply store found the part on the internet with a Whirlpool part #. I found that number on the website of another parts supplier (Appliance Zone) but it did not have a picture of the part. It was called a gas connector, and I ordered the part. It arrived quickly, but the name on the parts bag was "elbow". It was only the elbow. I couldn't believe that someone would sell half of a union. I did more searching and found your website which had a picture and description of a "Elbow Union... Read more

More
$54.25

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Cabinet Top Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: 35-2846

This is a top cabinet hinge used on a washing machine. It connects the top panel to the washer cabinet, allowing the panel to pivot open for access to internal components. Replace this hinge if it is bent, broken, or corroded, or if the top panel no longer opens, closes, or sits flush properly.

More
$19.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Fastener Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: 489392

Replacement screw for securing appliance panels, mounting brackets, and internal assemblies. Restores tight connections when original screws are missing or damaged.

More
$12.13

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Switch, Rocker (Bsq)
Genuine Whirlpool part
By: Whirlpool
Part Number: 74008765

 

Do-It-Yourself Stories from Customers like You My dual front element was burned out in middle (small size) & the switch to go from large to small had stopped working (melted)   Mary C. • Mt Pleasant , PA • August 14, 2016

I ordered the parts on Wednesday and they arrived on Thursday! Wow, that was F-A-S-T !! With some help from my electrician in training son, we were able to swap out the dual element and new rocker switch in about 30 mins! Works perfectly!! Thank you Appliance Parts Pros!! Read more

More
$56.34

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10756178

 

More
$7.18

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Guide, Pad
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001356

Felt pad.

Do-It-Yourself Stories from Customers like You Belt felt seal assembly   Christopher P. • Elgin , SC • November 01, 2014

Removed front wall of dryer, disconnected electrical from wall(first thing). Disconnect front door switch, remove tub, remove felt, clean, used compressed air to blow out all dust from heater assembly. Used compressed air to blow out all lint catch line parts. Used electrical contact cleaner to clean all electrical connections where dust and lint had gathered. Installed new felt pad by first applying high temp adhesive, let adhesive set about a minute or so, install felt. Let sit for about... Read more

More
$29.64

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Push-Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3195558

 

More
$3.82

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35-2132

Size: 1.25OD x .530IDX.

More
$2.93

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Lock Nut (10-24)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10131078

A 10-24 lock nut used to secure threaded fasteners and prevent loosening from vibration. Simple, durable replacement that restores proper fastening where the original nut has worn or failed. What it does:

  • Secures shafts, studs, or bolts with 10-24 threads and resists loosening under normal appliance vibration.
  • Restores proper tension where a stripped or loose nut causes rattling or parts shifting.
  • Helps maintain alignment of panels, brackets, or components that rely on a locked fastener.
  • Small hardware solution for common fastening failures—no special part modifications required.
What's included: One 10-24 lock nut. Install notes:
  • Disconnect appliance power and water before beginning repairs.
  • Use the correct 10-24 threaded fastener and a properly sized wrench or socket to avoid rounding the nut.
  • Tighten to a snug fit—do not overtighten or force onto damaged threads.
  • Inspect mating threads and replace the bolt/stud if threads are stripped or damaged.

More
$2.64

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google