Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Color: White. For gray order 2206781. Front load washer dispenser lid. If you need the pins to attach the lid order the long pin WP6-912678 and the short pin WPY912679
After much internet research (primary YouTube) as to why my Maytag Neptune washing machine's spin cycle stopped working, I ordered the parts I needed to fix it. Sure enough, it was a failed wax motor and a blown control board at fault. After replacing both parts, we have a functioning washing machine again. While I was at it, I replaced the soap dispenser's bezel and lid since they were deteriorating and now we have a "new" washer! I also replaces the thermostat in the matching dryer and we... Read more
Installed a new water velve but there was still some leakage, discovered that there was three holes in the door boot....will order a new one. Read more
Ordered boot watched video had no trouble finding ,parts easily entered part num,no problems at all Read more
Front load washer door boot seal, comes with drain plug and clamp.
I used the instructions from some of your previous customers. When I was ready to pull the inner tub from the outer tub, it pulled very hard. The front bearing had been HOT and really marked the shaft. The SEAL appeared to be almost plastic, not much left. I removed the seal from the Front bearing. This model had the original type seal with the plastic spacer behind the seal and in front of the front bearing.. BE SURE TO NOTE HOW THE PLASTIC SPACER CAME OUT--feet on spacer toward the... Read more
Replace your washer's cracked or worn outer tub assembly. Includes ball bearing, rear bearing, water deflector, and lip seal. Essential structural part.
Basically rebuilt the washer from the ground up. Spent more money than a new washer but we have been so happy with the way this machine has worked over the last 19 years figured it would be money well spent. Read more
I was able to find the parts and when they arrived, the replacement took just a few minutes. Read more
This rubber grommet seals and cushions the connection where the front baffle attaches to your washer. It prevents water leaks and reduces vibration noise during operation. Replace this grommet if you notice water leaking from the front panel area or if there's excessive noise during wash cycles.
The siphon cup is part of the detergent dispenser system inside your washer and creates proper suction for dispensing liquids. Replace when fabric softener or bleach doesn't dispense correctly or remains in the dispenser after cycles.
Did not know if these were the right parts. I believe i talked to someone named Robin and she was very helpful and friendly. Said she wasn't sure these were the parts since they were not listed on my model number but said if they didn't work i could send them back. been to many parts stores and nobody could find these two items or even suggest them. Very good employee who helped me. Was really surprised how fast my order got here. Excellent service. I've bookmarked your site and will be doing... Read more
Sound dampener for cabinet and front panel.
*GREAT! *Parts arrived quickly and the job was fairly simple to complete. Thank you! Read more
Ordered the parts, watched the video and went to work on both. It was all very easy! Read more
Washer failed one night, gushing 15+ gallons of water across the floors. Called appliance service company out to take a look at it. Service rep. determined problem was drain pump and/or pressure switch. But because our washer was over 10-12yrs old, he claimed that parts were no longer available and we'd need to buy another washer. I went online to Appliance Parts Pros the next day, found the parts, watched their helpful DIY videos and ordered the parts. When the parts arrived the next day... Read more
The motor conversion kit contains the necessary parts to replace or upgrade the drive motor in an appliance, including any adapters or hardware needed to make the new motor compatible with your existing setup. The drive motor powers the drum, agitator, or other moving components depending on the appliance. Use this kit if the original motor has burned out, hums but won't run, or the appliance has stopped moving or spinning entirely.
I had watched some videos on youtube to understand how to disassemble & gain access to the various washer components & their location. Very easy. I had first replaced the wax motor, but that was not the problem. I reviewed the diagnostic procedures that were present near the control board, followed the directions to remove the main plug from the motor control board, which should allow the washer to spin at 50 rpm. No spin, & upon closer inspection, I observed that one of the phase drive... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.