Mav735aww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Whirlpool part

Screw (Mounting)

5.0 (4)

By: Whirlpool

Part Number: WPW10309247

Mounting screw used to secure panels, trim, brackets, and small appliance components. Replace a missing or damaged fastener to restore proper fit, reduce vibration, and keep parts aligned for safe operation. What it does:

Secures panels, control boards, brackets, and trim to maintain correct assembly
Replaces stripped, broken, or missing screws that cause loose or rattling parts
Helps prevent misalignment that can interfere with doors, knobs, or covers
Standard fastener interface — use the correct driver and size for a secure fit

What's included: One screw Install notes:

Disconnect power and/or gas and follow appliance safety procedures before servicing
Use the correct screwdriver or bit to avoid stripping the head
Do not overtighten; snug until secure to avoid damage to threads or surrounding parts
If threads are damaged, replace the mating component or use the correct thread-repair method

Do-It-Yourself Stories from Customers like You The upper agitator kept floating off Brian T. • Pine Grove Mills , PA • October 02, 2018

New parts did the trick. Very easy to replace. Did not need to replace the base agitator, the fabric dispenser, or the screw; but, while it was apart it was simple to do. Read more

$22.62

Compare At:: $25.90
You Save:: $3.28

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Control Board

5.0 (3)

By: Whirlpool

Part Number: WP22003906

Analog water temperature control board.

Do-It-Yourself Stories from Customers like You Water temperature issue: cold worked warm worked hot did not work Kelly H. • Mountain Brook , AL • June 26, 2017

I am a stay at home mom who keeps a tight budget. We had a few large auto repair bills lately and then the washer's hot water broke - during muddy/sweaty/rainy Alabama summer football practices (which is a nightmare, believe it!) and I was strapped for the money to pay for a repairman. I have had success with Appliance Parts Pros parts for our dishwasher and clothes dryer, so after a little Google searching I decided to give it a go and replace the Temperature Control Board myself. It was... Read more

$73.75

Compare At:: $90.86
You Save:: $17.11

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Gasket (Basket To Center Shaft)

5.0 (3)

By: Whirlpool

Part Number: WP35-3685

This gasket seals the basket to the center shaft to help prevent leaks and reduce noise from worn or damaged seals. It restores a proper seal between the tub/basket and the drive shaft for reliable operation. What it does:

Seals the gap between the basket/tub and the center drive shaft to help prevent water from leaking into the motor/tub area
Helps reduce rubbing noise caused by a worn or torn seal
Restores a tight fit after seal failure, wear, or damage
Common symptom: water leakage from the tub area or visible wear around the shaft opening

What's included: One gasket Install notes:

Refer to the exploded parts diagram for correct positioning and orientation
Inspect mating surfaces for damage or residue and clean before installing the new gasket
Replace only when the appliance is unplugged and water supply is turned off; follow safety procedures for draining and securing the unit
If other components show wear (shaft seals, basket, or fasteners), replace them as recommended by the OEM

Do-It-Yourself Stories from Customers like You Washer was leaking between outer tub and mounting base plate Jeffrey T. • Stallings , NC • May 07, 2016

Replaced all seals, unfortunately it is still leaking. I can see where it is leaking from. I am going to tear it back down use some ultra grey gasket maker and reinstall tub gasket. Hoping that works. If it still leaks I will be using the washer as a large paper weight. Read more

$43.95

Compare At:: $52.74
You Save:: $8.79

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Locknut (Threaded Retaining Nut)

By: Whirlpool

Part Number: WPY707702

This locknut is a small threaded retaining nut used to secure rotating and stationary appliance components, helping keep assemblies tight and stable during operation. It prevents parts from loosening and reduces vibration-related issues. What it does:

Secures shafts, pulleys, or fittings to prevent axial movement
Keeps assemblies fastened under normal vibration and load
Helps stop wobble, grinding, or part separation caused by a loose connection
Works with the matching threaded stud, shaft, or fitting for a proper hold

What's included: One locknut Install notes:

Disconnect power and follow appliance safety procedures before servicing
Use the matching thread size and engage threads fully; hand-start before tightening
Tighten securely without overtightening; use the correct driver or socket for the nut
Inspect mating threads and replace if damaged

$5.95

Compare At:: $7.08
You Save:: $1.13

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: 213007

Spesc: #12 pozi - drive

$8.95

Compare At:: $10.65
You Save:: $1.70

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Wire Retainer

By: Whirlpool

Part Number: WP22003298

$6.35

Compare At:: $7.62
You Save:: $1.27

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Washer

By: Whirlpool

Part Number: WP35-3570

$35.37

Compare At:: $42.09
You Save:: $6.72

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Nut, Idler Bracket To Base

By: Whirlpool

Part Number: WP692771

$4.95

Compare At:: $5.84
You Save:: $0.89

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Control Panel, Facia (Biscuit)

By: Whirlpool

Part Number: 22003865

Color: Biscuit.

$320.71

Compare At:: $352.78
You Save:: $32.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Whirlpool part

Lower Bearing Assembly

5.0 (10)

By: Whirlpool

Part Number: 12001562

Screws and instruction sheet included.

Do-It-Yourself Stories from Customers like You Bearings were worn out makeing a lot of noise Lawrence L. • Largo , FL • August 08, 2015

I had a lot of problems removing the spin hub, I had to use an air impact wrench to un screw it even then it was very hard, it did not go easy with the hammer & pipe wrench as shown in the video. It was also very hard to remove the bottom spin bearing I had to cut the bearing retainer with a dremel tool so I could get my puller on it. After I struggled to get it apart The repair went very easy, I used brake spring pliers to remove the springs it worked like a charm. I am very pleased with... Read more

Genuine Whirlpool part

Tub Seal

4.7 (28)

By: Whirlpool

Part Number: W10219156

Do-It-Yourself Stories from Customers like You Maytag atlantis making really loud noise during the spin cycle Carl F. • Park City , KS • March 02, 2015

First; The part was ordered on Thursday and I received it on Friday! The kit was the correct one and complete with everything needed. (Maytag Atlantis MAV6200AWW – APV4373103 tub seal kit & bearing) Great Service ! I will certainly recommend you guys ! Some of the things I encountered installing the tub-seal on a machine that is 15 years old: Be prepared to do considerable cleaning of the tub cover, tub assy and outer tub. The 4 tub assy bolts were very rusted to the point the ½ inch socket... Read more

Genuine Whirlpool part

Water Inlet Valve

4.7 (10)

By: Whirlpool

Part Number: 12002158

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of water into the washer during the fill cycles. The valve opens to allow water to enter the tub and then closes once the desired water level is reached, ensuring the proper amount of water is used for washing. This valve includes the thermistor.

Causes of a bad water inlet valve can include mineral deposits and sediment buildup, electrical issues such as faulty solenoids, or wear and tear from frequent use.

Symptoms of a bad water inlet valve include:

The washer not filling with water
The washer filling slowly or not stopping filling
Leaks from the valve area
Inconsistent water levels during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Potential series changes might cause the valve to be part number WP22004333. Make sure to verify your model number for the correct part.

This part fixes the following symptoms

Will not fill with water
No hot or cold water

Do-It-Yourself Stories from Customers like You I was not getting any cold water in my washing machine. Kenneth D. • Blasdell , NY • July 06, 2023

1.) Made sure BOTH Hot & Cold Water Lines turned off to Maytag Washer. (I have dual shut-off valve for those two water lines), 2.) Briefly ran Washer on Warm Water Setting, removing water pressure & remaining water from Hot & Cold water lines. 3.) Unplugged Washing Machine. 4.) Used Needle Nose Pliers to remove BOTH Hot & Cold Water hoses from the hookup on the back of the washer. 3.) Made sure I had an empty bucket, on hand, to catch remaining water that may come out of now-removed, hot &... Read more

Genuine Whirlpool part

Leg Assembly

5.0 (10)

By: Whirlpool

Part Number: WP25001119

Includes leg, foot pad and locknut.

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You I was not getting any cold water in my washing machine. Kenneth D. • Blasdell , NY • July 06, 2023