Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This is the longer of the two dispenser lid hinge pins. For the shorter lid hinge pin order WPY912679.
The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more
To order indicator lens use WP22001948.
Insulates your dishwasher tub to reduce noise and maintain temperature. Replace if worn, damaged by pests, or causing odors. Confirm fit with your model.
Replaced the insjulation blanket Read more
This is a small metal or plastic hinge pin that secures the detergent dispenser door on the dishwasher's inner door panel. It allows the dispenser cover to pivot open during the wash cycle to release detergent. Replace this pin if the dispenser door falls off, won't stay closed, or fails to open properly during a cycle.
Replacement screw secures appliance panels, brackets, and internal components. Needed when original screws are stripped, missing, or damaged during repair.
I watched a 3 minute video on You Tube on how to replace a refrigerator door handle and it took me 3 minutes to replace mine. Super easy! Read more
Screw: 8-16 x 3/8 inch.
Protects tine tips from rust and prevents dish scratching. Replace when cracked, missing, or worn to extend rack life. Confirm fit with your model.
Bought the parts. Watched the video from the website...super easy. Read more
The Tub Wheel supports and guides the washer's tub assembly on its base during wash and spin cycles. Replacing a worn wheel restores smoother, quieter operation and helps reduce vibration and rubbing as the machine operates.
Specs: No.8X1/2 HEX WASHER HEAD
Replaced the control board after removing the inner door liner, plastice board cover and board itself, by removing screws, working various plastic clips/tabs and unclipping wire harnesses from board. most of time was spent cleaning the black soot from the door, which had a terrible burnt electrical/plastic fire smell. Cleaned mold/scale off of as much of the door as I could while in there as well. Removing parts without breaking plastic tabs to hold the new parts was trickiest part. Read more
Creates a leak-resistant seal between pump components and connections. Replace when you notice water leaking during drain cycles or around fittings.
I first wanted to get the dishwasher running, before ordering the spring links. So I disassembled the pump / motor assembly to determine the reason the motor would not start. My wife cleaned all of the parts in the pump assembly. I took the motor apart and discovered that the lower bearing ( a sleeve type bearing) was dry and dirty, and was the culprit for the motor seizing. I cleaned up the bearing and lubricated it with SAE 20W. I also packed felt inside the cavity adjacent to the bearing.... Read more
Gray plastic cap that threads onto the center of your dishwasher's lower spray arm assembly. Replaces cracked, broken, or missing caps. Hand-tightens.
I looked in the bottom of the dishwasher and saw that the center piece of the water wheel had somehow come loose. That center piece was lodged under the heating element and was now somewhat beaten and melted. We looked on line for an illustrated parts breakdown and found it on Appliance Parts Pros website. The diagram was so clear and straight forward that it was easy to see the part that we needed and another part (when we looked) we also found missing. Well, 3 days later the parts came in... Read more
This tub wheel mounts on the dishwasher's tub wall to guide and support the rack as it slides in and out. Replacing a worn wheel restores smooth rack movement and helps prevent binding, noise, and derailments.
Replacement tension spring for dishwasher doors and mechanisms. Restores proper return force when the original spring is broken, stretched, or missing.
Replacement leveling leg that stabilizes and adjusts your dishwasher height for proper alignment. Needed when bent, broken, or missing to eliminate rocking.
Fix loose or rattling dishwasher trim panels with this dispenser retainer clip. Secures interior panels and exterior trim for proper fit. Easy repair.
Gray plastic cap that snaps onto the spray tube diverter assembly inside your dishwasher. Replace if cracked, broken, or won't stay attached to tube.
I bought the parts and installed them. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.