Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Upper dishwasher rack adjuster assembly. Right hand side. For the left hand side order WPW10153530.
Purchased replacement roller assemble and installation was straight forward. Read more
This knob controls the rinse aid dispenser setting in your dishwasher, allowing you to adjust how much rinse aid is released during the wash cycle. It typically has numbered settings from low to high dispensing amounts. Replace it if you can't adjust the rinse aid flow, the knob is missing, or if it won't stay in the selected position.
Was easy to locate exact part needed by inputting model number Received my part in under a week. Great site for parts Read more
Seals the air/water inlet where it meets the tub to prevent leaks. Replace if you notice water dripping during cycles. Confirm fit with your model.
Replaced the seal at the Air/Water inlet and also replaced the drain hose. Drain hose had a worn spot due to vibration rubbing on the floor Read more
Lower rack fold-away tine row for dishwasher. Replace when tines rust, break, or no longer fold properly. Verify fit with your model number listed.
Replaced the tines. It was a piece of cake! Read more
Color white. The wash arm measures about 11 inches, and the retainer about 3 inches.
Spun each of the three wash arms by hand. All could be made to touch/scrape but the top one was super wabbly. Ordered both the arm and clip. Repair took less than a minute. Used a screwdriver to pry loose one side of the old clip to remove. Aligned the new parts and easily snapped into place. Read more
This O-ring creates a watertight seal in your dishwasher's wash or drain system, helping prevent leaks and maintain proper water pressure. Replace a brittle, flattened, or damaged ring to restore a reliable, leak-free connection.
Removed 8 screws that retain inner door to outer door. Removed rinse aid dispenser nut and replaced O-ring around dispenser. Also, removed 2 screws that retain the latch assembly and replaced rubber grommet around latch lever that retains soap dispenser door. Read more
Right hand side. For the left hand side order WPW10153533.
New part was ordered and replaced on dishwasher rack. Read more
This plastic component holds individual tines in proper position on your dishwasher rack, keeping them aligned and secure during wash cycles. Each tine row contains multiple plastic prongs that hold dishes and utensils in place. Replace this tine row if individual tines are broken, missing, or no longer hold dishes securely in position.
I ordered new replacement parts. Read more
Note: Check Serial Number for correct part
I installed the door latch assembly and handle. It worked fine after that. Read more
It was actually the control panel and not the electronic control board. Replaced the part and it works fine! Read more
Note: New rack no longer includes removable tines or cup shelf. This part is a lower dishrack. The lower dishrack is the lower shelf of a dishwasher that holds plates, bowls, and utensils. To remove the old dishrack, simply pull it out and lift the wheels up from its track. Set it off the side, and lift the new dishrack. Slide it into its track and make sure it is locked in. If it is gliding in and out in a smooth way, it has been installed properly.This genuine replacement OEM part is sold individually and is compatible with Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand appliances.
Bottom replacement rack is a complete unit. Simply slid the old, rusted one out and slid the new one in. Read more
Located on the supply tube behind the upper dishwasher rack.
Dishes were 'gritty' with an almost invisible coating of specks smaller than grains of salt. Prior to ordering parts, I had to determine which part(s) needed replaced and which could benefit from a good cleaning. After viewing Appliance Parts Pros YouTube Videos, I removed the Main Manifold (snaps right off) including the Top Spray Arm. I discovered the Flappers of the Docking Station (AP6009888) were worn out and/or missing. I removed the Docking Station simply by popping the old one off... Read more
Thank goodness for this website and their how-to videos! I wouldnt have been able to fix the dishwasher in my new house without the videos. Easy fixes and so much cheaper than having to buy a whole new top rack! Read more
I ordered the part from you which amazingly showed up less than 20 hours after I ordered it. I then watched a video you produced about replacing the part. Between those two things I had my dishwasher up and running withing 36 hours of talking to your rep. Read more
Rotating upper wash arm assembly for dishwasher top rack. Replace if cracked, broken, or clogged with calcium buildup to restore spray coverage.
I replaced all 3 washer arms Read more
The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.