Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Note: New rack no longer includes removable tines or cup shelf. This part is a lower dishrack. The lower dishrack is the lower shelf of a dishwasher that holds plates, bowls, and utensils. To remove the old dishrack, simply pull it out and lift the wheels up from its track. Set it off the side, and lift the new dishrack. Slide it into its track and make sure it is locked in. If it is gliding in and out in a smooth way, it has been installed properly.This genuine replacement OEM part is sold individually and is compatible with Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand appliances.
Bottom replacement rack is a complete unit. Simply slid the old, rusted one out and slid the new one in. Read more
Lower rack fold-away tine row for dishwasher. Replace when tines rust, break, or no longer fold properly. Verify fit with your model number listed.
Replaced the tines. It was a piece of cake! Read more
Color white. The wash arm measures about 11 inches, and the retainer about 3 inches.
Spun each of the three wash arms by hand. All could be made to touch/scrape but the top one was super wabbly. Ordered both the arm and clip. Repair took less than a minute. Used a screwdriver to pry loose one side of the old clip to remove. Aligned the new parts and easily snapped into place. Read more
Adjustable tine clip secures and positions tines on dishwasher racks. Replace when broken or missing to restore proper dish support. Verify fit by model.
Ordered replacement parts from AppliancePartsPros.com. Received them in a few days, and did the repair in less than 10 minutes! Read more
Right hand side. For the left hand side order WPW10153533.
New part was ordered and replaced on dishwasher rack. Read more
I ordered the part from you which amazingly showed up less than 20 hours after I ordered it. I then watched a video you produced about replacing the part. Between those two things I had my dishwasher up and running withing 36 hours of talking to your rep. Read more
Kit includes more than shown on picture. New kit is for both plastic and stainless tubs. Plastic tubs use only the float and the switch stainless tubs use all the parts.
I replaced the float switch. It was an easy enough repair. I didn't have to remove the dishwasher to do the work. The part is accessible from behind the front skirt.The only problem was there is not a lot of space to work in. Getting the fastener off and on requires a stubby nut driver. I used a flexible extension instead. I had to feel for the nut as the bottom of the door blocked my view. A ten minute job and the dishwasher is back in service (for half the cost of my local parts place) While... Read more
Replaced pump and filter. Read more
Replaced gasket. Read more
I verified the door interlock switches and the float switch in the base tub, all verified so I ordered the main electronic board, The board arrived and I installed it and everything is working great. Read more
Bottom
Part I ordered was not the problem. The corners of the dishwasher were loaded with garbage, grease and other foodstuffs. I digitally cleaned out the corners, re-seated the door seal and used a cleaner in the machine. Did two courses of cleaning. Also needed to clean the pump screen and top of the pump. Lots of junk there. All of this fixed the leaking and the junk on the dishes. Hardest part was loosening the duct from the top impeller to the pump. Read more
These convertible rear rack tines replace bent or broken prongs on the dishwasher's rear rack to help keep plates and bowls upright and prevent shifting during cycles. Durable molded tines restore rack function without replacing the entire rack. What it does:
By ordering the replacement parts. Parts were perfect fit. Read more
Ordered the part. Arrived the next day. Took the eleven screws off the door exposing the back of the Soap/Rinse Aid dispenser. Six screws hold it on the inside of the door. Popped off easily. There is a plug that runs from the timer to the dispenser…it's a pain to get off. Use a flat head screw driver. Screwed the new unit in place. Plugged it in. Put the door back together. I accidentally caught the door catch in the door and screwed it together seizing it...so I had to take the top screws off... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.