Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Color: light blue. This tine latch measures about an inch wide.
Ordered and installed clips from AppliancePartsPlus. Only suggestion is a picture of exact INSTALLED location of part. The breakdown ordering picture is great but when it comes to installing parts that have broken and not longer attached, instructions would be helpful. Read more
This impeller assembly replaces a worn or damaged wash-pump impeller to help restore water circulation and spray pressure for better cleaning. Commonly used in compatible Whirlpool wash pumps to address weak wash performance. What it does:
The initial problem was just a simple blockage on the filter screen...until I dropped a screw. So, I had to take the rest of the insides apart to retrieve it. The original impeller would not come off easily, so I tried to pry it off. Naturally, that caused the threaded portion to break. The new impeller went on much more easily than the old one came off, and the dishwasher is back in action. Simple repair; there's really not much to the inside of this thing. Read more
Dishwasher rack rear bowl tine. For the front tine order 12002218. For the tine clip order WPY912709.
I ordered new replacement parts. Read more
This dishwasher door strike mounts to the tub opening and provides the catch point for the door latch. Replacing a worn or bent strike restores positive latching so the control can sense a closed door and run cycles reliably.
Watched a video on how to replace the switch. Took ten minutes total time. Hardest part was removing the wiring from the broken switch. Fit perfectly, and very happy . Read more
This upper rack wheel and axle assembly lets your dishwasher's top rack glide smoothly and stay level. Replace a cracked or missing wheel to fix hard-to-slide racks, scraping noises, or a rack that slips off the rail.
Found the parts I needed on the Appliance Parts Pros website. Went to my local appliance store with the pictures from the website, and they did not agree that the replacement rack roller was what I needed. I was to return with a picture of my Dishwasher upper rack to show them. This was a 30 mile round trip, that I was going to have to do again before the parts I needed would even be ordered. Came home, went back to Appliance Parts Pros website and ordered the 2 items I needed. They... Read more
This little door seal goes on the corner of the dishwasher door. There are two of these seals - one in each corner. It is recommended to order and replace both. If you need pushnuts, order 99002756.
Replaced seal with your parts problem fixed Read more
This dishwasher drain hose channels wastewater from the pump to your home drain or air gap. Replacing a cracked, kinked, or clogged hose restores proper draining performance and helps prevent leaks or water backing into the tub. What it does:
Replaced the seal at the Air/Water inlet and also replaced the drain hose. Drain hose had a worn spot due to vibration rubbing on the floor Read more
This adjustable clip is used to hold the tines in place on a dishwasher rack. Color: blue. Measures about 3-3/4 inches wide by a 1/2 inch high.
I replaced the float switch. It was an easy enough repair. I didn't have to remove the dishwasher to do the work. The part is accessible from behind the front skirt.The only problem was there is not a lot of space to work in. Getting the fastener off and on requires a stubby nut driver. I used a flexible extension instead. I had to feel for the nut as the bottom of the door blocked my view. A ten minute job and the dishwasher is back in service (for half the cost of my local parts place) While... Read more
Used on the ends of the tines inside the dishwasher rack.
Parts came fast and the videos were very helpful. It showed which way the tine went, dishwasher rack back working. Read more
This Drain Pump Motor Assembly replaces the washer's drain pump motor and impeller so the machine can move water out during drain and spin cycles. Restores proper draining and reduces standing water in the tub. What it does:
I was able to pull the entire basket/pump/motor assembly out from inside the tub I did not pull the DW out of the cabinet. I did not remove/disconnect the water line or even have to disconnect/cut power. I only removed the drain tube and drain pump. The rest came out from inside the tub. Much easier than I anticipated. There are some videos that demonstrate how to do this. I took my time and cleaned everything once I had it all out. Read more
Color: light blue. Measures about 3/4 of an inch high by 5-1/2 inches deep.
Used on the end of the rails to prevent the upper rack from falling out.
I installed a new Rack Track and Rack Stop. I watched the short tutorials on your web site for installing each part and voila...the upper rack in my dishwasher was like new...so easy, this 67 year old grandmother could do it with no help from her husband! Read more
This run capacitor helps start and keep the motor running smoothly by providing the necessary phase shift and torque boost. A weak capacitor can cause hard starting, humming, or intermittent motor operation.
Figured it was either the capacitor and/or motor. Ordered both parts to be sure. tried changing the capacitor first; same problem. Replaced the motor (leaving the new capacitor in place). Unit now works fine. Overall an easy fix once you get the washer out and tip it on its side or top to get access to the motor area. Read more
Restore worn dishwasher racks and help prevent rust stains on dishes. This white rack repair kit covers chipped or exposed rack tines and caps bare metal to reduce corrosion and extend the useful life of your racks.
Replaced it with the modern replacement you provided. Now I have a repair kit, spare rollers, a foldable rack of tines and all the related parts put back for repair if necessary. A win win scenario. Thanks for all you do. :>) Read more
This small rubber grommet seals the opening around the dishwasher's detergent/rinse-aid dispenser, helping prevent leaks and moisture intrusion so the dispenser operates reliably throughout the wash cycle.
After discovering your web site and reading of others issues I ordered a door seal (my old one was a little short on the right side) a detergent door grommet, and the 2 water deflectors ( I decided to cover all the bases while I was at it. Very simple job with the information provided on your web site. I certainly have the confidence to tackle other appliance repair now. Read more
This Tub Edge Trim (bottom) fits along the lower edge of the dishwasher tub opening. Replacing a cracked, warped, or missing trim restores a clean finished edge and helps the door open and close smoothly without rubbing or snagging.
I ordered a new rubber door seal for around door, new bottom door seal and spinner impeller and nut to hold on bottom arm as it looked weak. Everything worked great except bottom door seal which looks slightly different and would NOT stay on. I ended up putting back on the old one. Door doesnt leak but not sure it would even be worth it sending part back as I already tossed bag out. Other parts worked great and DW cleaning better. Read more