Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Includes screws and wire connectors. For the complete terminal block kit use 279320.
I ordered the parts through AppliancePartsPros.com. They were delivered the next day. I installed them and the dryer works great. Read more
Secures the idler pulley to maintain proper drum belt tension in your dryer. Replace if worn, loose, or causing squealing noises. Confirm fit with your model.
Using You Tube How-To Videos. Replaced the drum drive belt and tensioner pulley/arm (including) the spring. Read more
Dryer won't start or stops mid-cycle? A faulty sensor wire harness disrupts temperature readings. This direct-fit harness restores accurate communication.
Followed the great video on the AppliancePartsPros.com website, that was perfect to get the completed. Read more
The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment.
Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.
Symptoms of a bad clip include:
This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more
Dryer not heating or taking too long to dry? This dual heating element restores proper temperature and drying performance. Moderate DIY repair.
Replaced the heating element and we have heat to dry our cloths THANKS Read more
This 3/8-16 nut secures appliance components and helps prevent loosening and vibration. Replace a worn, stripped, or missing nut to restore a tight, reliable connection and consistent operation.
I ordered the nut and was shocked when it arrived the next day. Read more
This is a metal hinge support plate that reinforces the door hinge area on a dryer, helping to secure the hinge to the front panel or door. It distributes the stress of repeated door openings across a wider area to prevent damage. Replace this plate if the dryer door sags, feels loose at the hinge, or if the mounting area around the hinge shows signs of cracking or wear.
Replaced several hinge parts. Read more
Dryer not heating? A warped or damaged heater box lets heat escape, reducing efficiency. This housing secures the element and protects components.
Well i thought i had to replace the whole metal casing, turns out the element is separate and that was all i would have needed. but i cot my original casing apart only to find out that was a mistake. anyway i got it all repaired now and its working like new. Read more
Dryer won't start, hums but won't spin, or drum doesn't turn? This drive motor powers the drum rotation. Moderate DIY repair with basic tools.
Replaced the motor Read more
Fix F4/E4 error codes or a dryer that won't start with this main control board. Manages cycle timing and drum operation. Moderate DIY repair.
Symptom: The dryer's control panel would light up; however, the drum would not start. A diagnostic test showed "F4/E4." (Note: This dryer has no history of issues and worked flawlessly for almost a decade prior to this problem.) I researched the problem online. I found that it could be as simple as a faulty Thermal Fuse (WP3392519//AP6008325) or as difficult as several bad components, to include the aforementioned Thermal Fuse, the Thermistor (WP8577274//AP6013514), and/or the Electronic... Read more
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
This is the exterior air grille that covers the dryer's exhaust outlet, directing warm, moist air out of the appliance. It helps protect internal components and maintain proper airflow during the drying cycle. Replace this grille if it is cracked, warped, or has broken louvers that could restrict airflow and reduce drying performance.
Was an easy fix with the new part and instructions. Read more
Fix a dryer that won't start, displays error codes, or won't turn off with this control board. Moderately difficult repair requiring basic wiring skills.
Replacement flip-up door that covers the lint screen opening in your dryer's front bulkhead. Needed when original door is cracked, broken, or missing.
There is no good diagram explaining how exactly these fit in. I had to do trial and error. The parts are quite delicate so I actually broke one trying to get it in. I would recommend ordering an extra or two. These need springs tonfit correctly. Luckily I saved the old ones...if you don't have them, it won't work. Unscrew the two screws on outside and two inside. You don't have to take whole thing out, just loosen. Look carefully and you can see the two little holes in the plastic where... Read more
10 - 16 x 1/2
I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more
Dryer won't start or tumble? This belt switch monitors drive belt tension and cuts power if the belt breaks or slips. Moderate DIY repair with video.
Remove bottom panel, remove top panel, remove drum. Had to cut old squirrel cage off. Remove motor to remove old wheel shank. Remove belt switch, and replaced. Videos from AppliancePartPros helped a lot.. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.