Mfw Parts

Channels defrost water from the drain outlet to the pan. Replace if cracked, disconnected, or clogged to prevent water pooling inside or leaking onto floor.

Noise filter (line filter) that suppresses electrical interference on the washer power line. Protects electronic controls from power surges and reduces EMI. Replace if washer has intermittent operation or won't start.

This orifice is a small precision component used in the refrigerator's cooling system to regulate refrigerant or gas flow. It is typically located near the evaporator or cooling circuit and helps control the rate at which refrigerant enters the evaporator coil. Replace this part if the refrigerator or freezer section is not cooling properly, frost patterns are uneven, or a technician has identified a restricted or damaged orifice during diagnosis.

Secures the roller pin in refrigerator drawer and track assemblies. Replace if missing, bent, or broken to prevent bins from tilting, binding, or dropping.

Shields and positions the temperature sensor for accurate readings. Replace if cracked, broken, or missing to restore proper sensor placement and airflow.

Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.

This is the fan blade that attaches to the condenser fan motor, typically located near the bottom rear of the refrigerator. It draws air across the condenser coils to dissipate heat and keep the refrigerator running efficiently. Replace this blade if it is cracked, warped, or broken, which can cause loud noises, reduced cooling performance, or the compressor overheating.

Replacement water hose for washers. Routes water between internal components. Replace if cracked, leaking, clogged, or damaged to restore flow.

The Hose is an OEM part for Whirlpool washing machines. It is a gasket or seal located inside the machine that protects internal components from leaks or damages. The hose washer plays an important role in sealing hoses and pipes to prevent water from escaping during rotation, agitation, and drain cycles. 

Causes of a bad hose include cracks, tears, or warpage over multiple usage cycles which allows water to bypass intended drainage paths. When this occurs, it can lead to excess moisture inside the washer cabinet. 

Symptoms of a bad hose include:

• Water leaks underneath or around the washer
• Puddles or standing water inside the washer cabinet 
• Slow or ineffective draining during washing cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Internal washer drum component that directs water flow during wash cycles. Replace if cracked, broken, loose, or catching on clothing during agitation.

Fix weak water flow or dripping at your refrigerator dispenser with this spigot assembly. Routes water from supply line to dispenser outlet.

Front counterweight that mounts to the washer's outer tub. Replace if cracked, broken, or missing to restore proper balance and reduce vibration during spin.

Replacement mounting bracket for laundry center washers. Secures components to the frame. Order when original is cracked, broken, or missing.

Adjustable track that refrigerator shelves glide on. Replace if bent, dented, or shelves no longer slide smoothly. Confirm fit with your model number.

The HOSE is an OEM part for Whirlpool washing machines and is designed to seal and protect the pump outlet hose from damage or leaks. The hose washer ensures a tight seal to prevent water from escaping during pump operation.  

Symptoms of a bad hose include:

• Water leaks from around the pump outlet area 
• Puddles or drips forming beneath the washer 
• Extended or incomplete filling during washes

Causes of failure involve wear and cracking of the rubber material from constant flexing of the hose during machine operation. Mineral or soap buildup can also cause the hose washer to fail to seal properly.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replacing the failed hose washer can prevent further water damage issues.

The Drain Hose is an OEM part for Whirlpool washers. It is responsible for carrying the wastewater out of the washer during the draining process.

A bad drain hose can be caused by wear and tear, blockages, or damage. If you notice water leaks, slow or incomplete drainage, or unusual noises during the draining cycle, it may indicate a problem with the drain hose.

Symptoms of a bad drain hose include:

• Water leaks around the hose connection points
• Slow or incomplete draining of water from the washer
• Gurgling or unusual noises during the draining process
• Visible damage or signs of wear on the hose

Replace your faulty drain hose with this genuine OEM Whirlpool part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.