Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Adjustable leveling leg for refrigerators and freezers. Installs at base corner to stabilize appliance on uneven floors. Replace if broken or stripped.
Purchased 2 replacement feet risers. A very awkward repait. Read more
Fix a refrigerator that won't cool or clicks but won't start. This compressor start relay activates your cooling system. DIY repair in under 30 minutes.
I went to appliancepartspros.com and described the symptoms which led to replacing the capacitor. The part arrived the next day!!! Unfortunately the clicking and warmness remained. I went to the online chat and Mandie recommended the relay which was next in the chain before the dreaded compressor. Once again the part arrived the next morning! I snapped it in and I was back in business, 90 dollars total in the two parts. No service call with the standard "it's the compressor" diagnosis. ... Read more
This gray magnetic door gasket creates an airtight seal around the refrigerator or freezer door to maintain proper internal temperatures. It is a flexible rubber strip that attaches along the perimeter of the door. Replace this gasket if you notice warm spots inside the unit, excessive frost buildup, the compressor running constantly, or if the gasket is visibly torn, cracked, or no longer sealing tightly when the door is closed.
Tempered glass cover that sits over the pantry or deli drawer in your refrigerator. Replace if cracked, shattered, or broken from impact or wear.
It seems large glass pickle jars are more durable than the tempered glass cover to the pantry drawer in my fancy refrigerator. My spouse dropped the jar which landed on the pantry cover. I feel fortunate the pickle juice didn't get everywhere. Instead, I got tempered glass everywhere; less smelly anyway. We searched online for the part number and did some comparison shopping. AppliancePartsPros.com beat them all. While we were at it, we ordered a replacement water filter which was also less... Read more
This is a white flipper mullion assembly that mounts between the refrigerator and freezer doors. It creates a seal between the two doors to maintain proper temperatures and prevent air leaks, and it contains a heater element to prevent frost and condensation buildup along the door gap. Replace this assembly if you notice frost forming between the doors, condensation dripping down the front of the unit, or if the mullion is cracked or warped and no longer sealing properly.
"It was a snap", following the YouTube video by Appliance Parts Pros, it just snapped into place. Read more
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
This motor control board is created for use with washing machines. It's located inside the washing machine, where users can change settings and start or stop the appliance. It is tasked with regulating how quickly the washer spins during a cycle. Wear and tear or damage can cause the motor control board to malfunction. This may make it impossible for the washer to agitate or spin. If this happens, a replacement will need to be made.To replace this part, start by unplugging the appliance. Once the area is safe, the bottom front panel should be removed. This will provide access to the original motor control board. Pull on the motor control board until the wires can be reached. The position of these components should be noted before taking out the part. Replace with a new motor control board and replace the wires.This motor control board is designed to fit washing machines made by Maytag, Whirlpool, Kenmore, and KitchenAid. This is an authentic OEM replacement part that is sourced directly from the manufacturer. It's sold as a single part.
We started getting the F06 code when on the normal cycle it was time to Rinse/Spin, pointing to a speed/tachometer issue on the motor. After several attempts of unplugging from power and restarting the cycle it would eventually start working for the rest of the laundry session. The Whirlpool technician after a brief look on the underside determined it was the motor and had to be replaced, even tough all troubleshooting tests on the motor were ok. I insisted that the probability was much higher... Read more
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Replaced icemaker and shutoff arm. Easy project. Read more
Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.
Found the parts in the diagram of my fridge and simply installed it very easy Read more
This rubber seal fits around the detergent or fabric softener dispenser housing on a front-load or top-load washing machine. It creates a watertight barrier that prevents water from leaking out of the dispenser area during wash and rinse cycles. Replace this seal if you notice water leaking from the dispenser, see visible cracks or deterioration in the rubber, or find detergent residue building up around the dispenser housing.
I ordered the dispenser and the distribution nozzle since the old one was in bad shape. I also replaced the boot since I had to take the entire machine apart and it is 20 years old. I watched your videos on you tune to learn what to do. I recently lost my job and really could not afford to hire someone to fix my washer. I have to say it wasn't that hard to do and my wife was so happy that I was able to fix it myself! I probably saved $200 or $300 in service calls and labor on top of what they... Read more
Suspension spring for washers. Supports the drum and absorbs vibration during spin cycles. Replace if broken, stretched, or detached from mounts.
Drawer slide axle for refrigerators. Supports smooth extension of crisper drawers on sliding tracks. Replace if plastic bushings are worn or broken.
Ordered the parts, got them within a few days and fit perfect and was sooooo easy to replace. Thank you all for your help! Read more
Shoulder bolt screw that secures refrigerator door handles. Replace if missing, stripped, or loose to restore proper handle attachment and alignment.
Replaced broken handle Read more
Center rail track guides and supports sliding drawer assemblies in your refrigerator. Replace if cracked, bent, or broken to restore smooth drawer movement.
Order a new Track Read more
Fix a washer that overfills or won't fill properly with a water level pressure switch. Monitors water levels during wash cycles. DIY repair.
This refrigerator roller supports the unit's weight and enables smooth movement for positioning and cleaning. Replace when wheels crack or roll roughly.
Replace front & rear wheels. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.