Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mgd4005swo Parts

Washer (Hardware), 1 Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10121334

This replacement washer is a small hardware component used in appliance assemblies to provide a stable bearing surface and proper spacing. Replacing a worn or missing washer helps maintain alignment, reduce vibration, and protect mating parts from damage.

  • Distributes load under a nut, bolt, pin, or shaft to protect mating surfaces
  • Maintains correct spacing and alignment within stacked components
  • Helps reduce friction, vibration, and noise in moving assemblies
  • Worn or missing washers can contribute to looseness, wobble, rattling, or premature wear
What's included: 1 washer Install notes:
  • Disconnect power and shut off gas/water before servicing
  • Note the original order and orientation of parts during disassembly
  • Inspect fasteners, shafts, and bushings; replace any that show wear or damage
  • Tighten fasteners securely per the service manual; do not overtighten

Do-It-Yourself Stories from Customers like You Skeaking bearings gone in idler pulley   Mark C. • Pulaski , NY • January 08, 2016

Replaced Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Drum Support Pad
Genuine Whirlpool part
By: Whirlpool
Part Number: W11409002

Dryer drum support pad provides cushioning and reduces noise during operation. Replace if worn, cracked, or causing rattling sounds. Confirm fit with your model.

More
$14.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Motor Mount Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10121316

This metal clamp secures the drive motor to its mounting bracket inside the dryer. It prevents the motor from shifting or vibrating during operation. Replace this clamp if it is bent, broken, or missing, which can cause excessive vibration, unusual noises, or a motor that moves out of position.

More
$16.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer 4-Way Venting Relocation Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10323246

Relocates your dryer's exhaust vent from rear to left, right, or bottom. Includes elbows, duct, and instructions. Replace when changing installation.

Do-It-Yourself Stories from Customers like You Changed the dryer vent location from the rear to the right side   Andrew K. • Santa Clara , CA • April 16, 2014

Used the Wpl. Vent Kit, 4-way. This is not a quick, easy job. You have to disassemble the dryer, removing the entire front, door, drum, and control panel. Take your time and take pictures as you go so you can get it all back together again after installing the conversion kit. It will take you at least an hour, and you need room to work. Also, remember that after converting the dryer over to left or right vent, you now have a wider dryer with the ducting sticking out the side. (4") Make sure it... Read more

More
$70.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Door Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10208250

Dryer won't start or stops mid-cycle? A broken door strike prevents the latch from catching, so the control can't detect a closed door. Simple fix.

More
$35.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Thermistor (Gas Inlet)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10419068

This temperature sensor mounts on the sealed-system gas inlet line in compatible refrigerators. It relays precise temperature feedback to the control so cooling and defrost cycles are managed correctly, helping maintain stable compartment temperatures. What it does:

  • Senses temperature at the gas-inlet line; resistance changes are read by the control
  • Helps regulate compressor, fan, and valve operation for proper cooling performance
  • A failed sensor may cause erratic temperatures or extended run times
  • Can correlate with control thermistor error codes or frost/ice patterns near the evaporator
What's included:
  • 1 thermistor sensor
Install notes:
  • Disconnect power before servicing
  • Note original sensor placement and insulation; reinstall in the same location and orientation
  • Attach the sensor firmly to the line and route the harness as originally, away from sharp, hot, or moving parts
  • Do not open or puncture sealed-system tubing; if damage is suspected, stop.

More
$55.30

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850046

This factory fastener secures appliance components such as panels, brackets, and handles. Replacing a missing or damaged screw restores a tight fit, reduces rattles, and helps keep parts aligned for smooth, reliable operation.

  • Secures components to the appliance frame or assemblies
  • Helps maintain alignment and structural stability
  • Replaces missing, rusted, or stripped hardware
  • Common symptoms include loose/wobbly handles or panels, rattling/vibration noises, or a visibly missing screw
What's included: One screw Install notes:
  • Disconnect power before servicing
  • Use the correct driver/bit and start threads by hand to avoid cross-threading
  • Do not overtighten; snug until secure
  • Replace any that are corroded or stripped for an even hold

Do-It-Yourself Stories from Customers like You Broken handle.   Paul P. • Mundelein , IL • December 19, 2022

Replaced the Door Handle. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Inner Door Panel Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: W11465962

This is the inner door panel assembly that forms the inside surface of the dryer door facing the drum. It helps seal the drum opening and often holds the lint screen housing or other interior door components. Replace this assembly if the inner panel is cracked, warped, or damaged, which can cause air leaks, reduced drying efficiency, or excessive noise during operation.

Do-It-Yourself Stories from Customers like You Door hinges   David M. • Soldotna , AK • November 21, 2023

Dismantled, and installed new components. Read more

More
$200.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850756

Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853898

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

  • Rear panel detaching from frame opening gaps
  • Increased noise and vibrations from a compromised seal  
  • Stress on other connections from improper mounting points
  • Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Gas Valve Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10118347

Dryer buzzing but not heating? Gas valve assembly controls gas flow to the burner. Common fix for ignition issues. Moderate DIY repair, 30-45 minutes.

Do-It-Yourself Stories from Customers like You No gas to burner in dryer just made buzz noise   Jason B. • Rockton , IL • November 01, 2015

Replaced solenoid valve assembly Read more

More
$220.70

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Hole Cover Plug
Genuine Whirlpool part
By: Whirlpool
Part Number: W10811916

Seals unused factory or service holes on your dryer cabinet or liner. Restores a clean appearance and keeps dust out. Replace if cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You Inspection port cover for gas dryer broken on delivery   Michael G. • Newberry , FL • August 13, 2017

Replaced broken part. simple pop in place. Read more

More
$10.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Gas Burner Orifice
Genuine Whirlpool part
By: Whirlpool
Part Number: WP229742

Dryer won't heat or flames are yellow? This butane burner orifice meters gas flow for clean, reliable ignition. Required for butane conversions.

More
$23.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Do-It-Yourself Stories from Customers like You Dryer drum completely wore off all coating   Larry W. • Ubly , MI • July 01, 2016

Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more

More
$58.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Blower Housing Assembly (Dryer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10211911

This blower housing assembly replaces the blower chamber that supports the blower wheel and routes air through the dryer for proper tumbling and drying. Restores correct airflow and helps reduce overheating or poor drying performance. What it does:

  • Houses and supports the blower wheel to direct airflow from the drum to the exhaust.
  • Ensures proper airflow for consistent drying and venting.
  • Can address symptoms like weak airflow, long dry times, or unusual blower noise when damaged or cracked.
  • Works with the blower wheel and motor to maintain lint passage and exhaust flow.
What's included: One blower housing assembly as shown. Install notes:
  • Disconnect power before inspecting or replacing the blower housing; follow manufacturer safety procedures.
  • Access may require removing the dryer front or rear panel depending on model.
  • Inspect the blower wheel and motor for damage or obstructions while replacing the housing.

Do-It-Yourself Stories from Customers like You Loud motor could not remove blower wheel.   Jason W. • Sandy , UT • January 25, 2021

I bought a new motor, blower wheel and housing and replaced all three. The motor rewiring was tricky, but there are plenty of videos to help explain. Read more

More
$79.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Front Panel Bumper
Genuine Whirlpool part
By: Whirlpool
Part Number: 8572266

This rubber bumper cushions the front panel of your washing machine during operation. It absorbs vibrations and prevents the panel from rattling or making noise during wash cycles. Replace it if your washer's front panel vibrates excessively or makes banging sounds.

Do-It-Yourself Stories from Customers like You The front door hinge of washer failed.   William B. • Richmond , VA • April 26, 2023

Replaced it with parts from your site. Watch the video It all went well Read more

More
$7.59

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google