Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mgd7657bww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Dryer Drum Light Deflector Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10208422

This cover mounts inside the dryer and shields the drum light from direct contact with tumbling clothes. It helps protect the light bulb and prevents garments from snagging on the light assembly. Replace this cover if it is cracked, melted, missing, or if clothes are catching near the light area during drying cycles.

Do-It-Yourself Stories from Customers like You Old worn out parts   Ronald W. • Rye , NY • December 31, 2016

Replacement parts fit perfectly. Read more

More
$51.62

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Air Duct Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10293765

Routes airflow inside your dryer to maintain circulation and temperature. Replace if cracked, warped, rusted, or blocked to restore proper air path.

More
$162.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer (Hardware), 1 Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10121334

This replacement washer is a small hardware component used in appliance assemblies to provide a stable bearing surface and proper spacing. Replacing a worn or missing washer helps maintain alignment, reduce vibration, and protect mating parts from damage.

  • Distributes load under a nut, bolt, pin, or shaft to protect mating surfaces
  • Maintains correct spacing and alignment within stacked components
  • Helps reduce friction, vibration, and noise in moving assemblies
  • Worn or missing washers can contribute to looseness, wobble, rattling, or premature wear
What's included: 1 washer Install notes:
  • Disconnect power and shut off gas/water before servicing
  • Note the original order and orientation of parts during disassembly
  • Inspect fasteners, shafts, and bushings; replace any that show wear or damage
  • Tighten fasteners securely per the service manual; do not overtighten

Do-It-Yourself Stories from Customers like You Skeaking bearings gone in idler pulley   Mark C. • Pulaski , NY • January 08, 2016

Replaced Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Electronic Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10378252

Fix a dryer that won't start or complete cycles with this electronic control board. Coordinates all dryer functions. DIY-friendly, 10-minute install.

Do-It-Yourself Stories from Customers like You Part on motherboard of our dryer went out   Alexander F. • Covington , OH • January 02, 2015

Replaced whole motherboard Read more

More
$246.46

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Drum Support Pad
Genuine Whirlpool part
By: Whirlpool
Part Number: W11409002

Dryer drum support pad provides cushioning and reduces noise during operation. Replace if worn, cracked, or causing rattling sounds. Confirm fit with your model.

More
$14.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Motor Mount Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10121316

This metal clamp secures the drive motor to its mounting bracket inside the dryer. It prevents the motor from shifting or vibrating during operation. Replace this clamp if it is bent, broken, or missing, which can cause excessive vibration, unusual noises, or a motor that moves out of position.

More
$16.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer 4-Way Venting Relocation Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10323246

Relocates your dryer's exhaust vent from rear to left, right, or bottom. Includes elbows, duct, and instructions. Replace when changing installation.

Do-It-Yourself Stories from Customers like You Changed the dryer vent location from the rear to the right side   Andrew K. • Santa Clara , CA • April 16, 2014

Used the Wpl. Vent Kit, 4-way. This is not a quick, easy job. You have to disassemble the dryer, removing the entire front, door, drum, and control panel. Take your time and take pictures as you go so you can get it all back together again after installing the conversion kit. It will take you at least an hour, and you need room to work. Also, remember that after converting the dryer over to left or right vent, you now have a wider dryer with the ducting sticking out the side. (4") Make sure it... Read more

More
$70.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Door Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10208250

Dryer won't start or stops mid-cycle? A broken door strike prevents the latch from catching, so the control can't detect a closed door. Simple fix.

More
$35.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Thermistor (Gas Inlet)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10419068

This temperature sensor mounts on the sealed-system gas inlet line in compatible refrigerators. It relays precise temperature feedback to the control so cooling and defrost cycles are managed correctly, helping maintain stable compartment temperatures. What it does:

  • Senses temperature at the gas-inlet line; resistance changes are read by the control
  • Helps regulate compressor, fan, and valve operation for proper cooling performance
  • A failed sensor may cause erratic temperatures or extended run times
  • Can correlate with control thermistor error codes or frost/ice patterns near the evaporator
What's included:
  • 1 thermistor sensor
Install notes:
  • Disconnect power before servicing
  • Note original sensor placement and insulation; reinstall in the same location and orientation
  • Attach the sensor firmly to the line and route the harness as originally, away from sharp, hot, or moving parts
  • Do not open or puncture sealed-system tubing; if damage is suspected, stop.

More
$55.30

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850046

This factory fastener secures appliance components such as panels, brackets, and handles. Replacing a missing or damaged screw restores a tight fit, reduces rattles, and helps keep parts aligned for smooth, reliable operation.

  • Secures components to the appliance frame or assemblies
  • Helps maintain alignment and structural stability
  • Replaces missing, rusted, or stripped hardware
  • Common symptoms include loose/wobbly handles or panels, rattling/vibration noises, or a visibly missing screw
What's included: One screw Install notes:
  • Disconnect power before servicing
  • Use the correct driver/bit and start threads by hand to avoid cross-threading
  • Do not overtighten; snug until secure
  • Replace any that are corroded or stripped for an even hold

Do-It-Yourself Stories from Customers like You Broken handle.   Paul P. • Mundelein , IL • December 19, 2022

Replaced the Door Handle. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Thermistor - Gas Inlet
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396709

The Thermistor is an OEM component specifically designed for Whirlpool gas dryers. It is a temperature-sensitive resistor that monitors the inlet gas temperature coming into the dryer. 

Causes can include the degradation of sensor components over time from repeated heating and cooling cycles. Moisture or debris intrusion could also impact functionality. 

Symptoms of a bad thermistor include:

  • The dryer fails to progress through or complete cycles  
  • Clothes remain damp even after extended drying
  • Gas flow error codes are present
  • Burned clothes smell is noticed from failed monitoring

This OEM Whirlpool replacement thermistor ensures accurate temperature readings for safe, optimized dryer operation. Its precise components deliver dependable sensing cycle after cycle. 

This part is also compatible with some GE, Crosley, Hotpoint, and select Kenmore electric and gas dryer models. Reliable and efficient drying performance results from an OEM thermistor replacement.

More
$51.62

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Inner Door Panel Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: W11465962

This is the inner door panel assembly that forms the inside surface of the dryer door facing the drum. It helps seal the drum opening and often holds the lint screen housing or other interior door components. Replace this assembly if the inner panel is cracked, warped, or damaged, which can cause air leaks, reduced drying efficiency, or excessive noise during operation.

Do-It-Yourself Stories from Customers like You Door hinges   David M. • Soldotna , AK • November 21, 2023

Dismantled, and installed new components. Read more

More
$200.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw (Flat Head)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488627

This flat-head screw secures panels, brackets, or trim so they sit flush on your appliance. Replacing a worn or missing screw restores a tight fit and helps prevent vibration, rattling, or shifting components.

  • Provides a countersunk, flush-mount fastener for panels, trim, brackets, or covers
  • Helps maintain alignment and secure attachment during operation
  • Replaces stripped, rusted, or missing hardware
  • Symptoms can include loose panels or handles, rattling noises, or visible gaps/misalignment
What's included: 1 flat-head screw Install notes:
  • Disconnect power (and shut off gas, if applicable) before servicing
  • Match screw length and thread to the original for proper fit
  • Start threads by hand to avoid cross-threading; tighten snugly without overtightening
  • Support the part being fastened to keep alignment while tightening

More
$12.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850756

Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853898

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

  • Rear panel detaching from frame opening gaps
  • Increased noise and vibrations from a compromised seal  
  • Stress on other connections from improper mounting points
  • Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Steam Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: W11216837

If your dryer's steam function isn't working or you hear unusual noises during the steam cycle, the water inlet valve may be clogged or faulty.

More
$77.45

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google