Mt291391 Parts

This fixed thermostat protects the appliance by opening the circuit when excessive heat is detected. Replacing a failed or weak thermostat restores reliable over-temperature protection and helps prevent heat-related shutdowns.

• Opens the circuit if the protected area overheats to help prevent damage to components
• Helps with symptoms like unexpected shutdowns during operation or no power after overheating
• Can be the cause when the unit only runs again after cooling down
• Helps maintain safe operating temperatures around heat-sensitive parts

• Disconnect power before servicing; some appliances contain high-voltage components
• Access location varies by model; note wire positions before removal and transfer one lead at a time
• Reuse existing mounting hardware; ensure firm terminal connections and correct orientation
• After replacement, confirm proper airflow/venting and normal operation

High-voltage capacitor for microwave ovens that stores and releases the electrical charge needed to drive the magnetron, restoring heating when the original capacitor has failed and preventing further electrical stress. What it does:

• Stores high-voltage electrical energy used by the magnetron to produce microwave energy.
• Works with the high-voltage transformer and diode; a failed capacitor can cause no-heat or reduced-heat conditions.
• Common, widely accepted symptoms: microwave not heating, loud humming, arcing/sparking, or blown fuse.
• Replacing a defective capacitor can stop repetitive electrical faults and protect other high-voltage components.

• Always unplug the appliance before beginning service and discharge the capacitor with an appropriate resistor or discharge tool.
• Handle and test the component using insulated tools; capacitors can retain dangerous charge even when unplugged.
• Verify correct part orientation and secure connections; use only the exact replacement specified by the manufacturer.

This door opening lever is the replacement release lever that lets the appliance door latch open and close smoothly, restoring reliable door-opening action and making everyday use easier. What it does:

• Replaces a worn, broken, or cracked lever that releases the door latch.
• Lets the door latch release properly so the door opens without excessive force or sticking.
• Works with the latch assembly to help ensure the door closes securely and operates smoothly.
• Addresses common symptoms such as a loose or unresponsive door handle, difficulty opening the door, or a lever that snaps.

• Disconnect power (and water, if applicable) before attempting any repair.
• Access may require removing the door trim or outer panel; basic hand tools are typically needed.
• Inspect surrounding latch components while replacing the lever and replace any damaged hardware.

Replacement incandescent interior oven lamp that restores cooking-cavity illumination so you can check food without opening the door. Direct-fit replacement sold individually for compatible appliances. What it does:

• Restores interior oven lighting so you can monitor cooking without opening the door
• Replaces a burned-out or flickering bulb to eliminate dark or partially lit oven interiors
• Helps diagnose whether lack of light is due to the bulb
• Fits behind the oven light cover and provides general illumination of the cavity

• Turn off power and allow the oven to cool completely before replacing the lamp
• Remove the oven light cover or shield per your appliance instructions before swapping the bulb
• Avoid touching the glass with bare hands; use a clean cloth or gloves to prevent oils on the bulb
• Reinstall the cover securely and test the lamp; if it still does not light, check the fixture and power

This is a genuine replacement mounting screw used to secure appliance panels and components. It restores proper fastening to reduce vibration and prevent parts from loosening during normal operation. What it does:

• Secures panels, brackets, or trim to the appliance frame
• Prevents rattling or vibration caused by loose fasteners
• Keeps wiring and small components held in place
• Helps maintain proper alignment of removable parts

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand, then tighten until snug; do not overtighten
• Keep removed fasteners organized to ensure correct reassembly

Color: Citrine white. Size: 4.5 oz. can. Acrylic appliance aerosol can spray paint.

Size: 2.8 fl.oz tube. 748 non-corosive sealant.

Color: Citrine white. Size: 0.6 fl.oz. Bottle with brush.

This flat metal washer provides a durable spacer and load-bearing surface for fasteners in the appliance, helping maintain proper alignment and distribute pressure to prevent damage. Simple replacement for worn or missing hardware. What it does:

• Sits under a nut or bolt to distribute load and protect mating surfaces
• Helps maintain correct spacing and alignment of assemblies
• Reduces wear and loosening where fasteners contact panels or components
• Reduces vibration-related movement when installed correctly

• Power off and unplug the appliance before accessing internal components
• Remove the fastener carefully; note orientation and any mating parts for reassembly
• Replace only with the same type and thickness of washer to preserve fit and function
• If corrosion or additional hardware damage is present, inspect and replace adjoining fasteners or parts as needed

This replacement screw is a general-purpose fastener used to secure exterior panels, trim, or internal components on compatible Whirlpool appliances. It restores proper fit and reduces rattles or loose parts for a safer, more reliable appliance. What it does:

• Secures panels, trim pieces, or mounting brackets to keep components in place
• Prevents vibration-related noise and movement caused by missing or loose fasteners
• Helps maintain alignment of control panels and exterior housings
• Replaces stripped, corroded, or lost screws to restore original fit

• Use the correct screwdriver or bit to avoid stripping the head
• Match screw length and thread engagement with the original for a secure fit
• Tighten to snug only; over-tightening can strip threads or crack panels
• Disconnect power before performing repairs on electrical components

This 10-32 x 3/8 machine screw secures panels and components in many appliances where a small, threaded fastener is required. It replaces stripped, missing, or loose screws to restore stable assembly and reduce vibration. What it does:

• Fastens panels, brackets, and small components using 10-32 unified threads
• Restores secure mounting when screws are missing, stripped, or loose
• Helps stop rattling, misalignment, and intermittent part contact caused by loose fasteners
• Works wherever a 10-32 x 3/8 machine screw is specified by the manufacturer

• Disconnect power or unplug the appliance before servicing
• Use the correct size screwdriver or nut driver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Replace with the same size and thread spec to ensure proper fit and function

This door latch assembly secures the door closed and signals the control that it's safely shut, allowing cycles to start and run. Replacing a worn latch restores a reliable safety interlock and consistent operation.

• Secures the door and engages the safety interlock so the appliance can operate
• Sends a "door closed" signal to the control
• Common symptoms: door won't latch or stay closed; unit won't start or pauses as if the door is open; intermittent operation when the door is bumped; visible wear or damage to the latch
• Helps prevent nuisance "door open" indications

• Disconnect power before servicing
• Access the latch from the door area; remove inner panel or trim as required by your model
• Note wire positions, transfer connectors, and mount the new latch in the same orientation
• Test door closure before reassembly

.95uf, 2100v, 50/60hz.

This cover guide is a replacement trim piece that helps guide and protect a range/oven door or drawer as it opens and closes, restoring smooth movement and preventing wear to the door edge. What it does:

• Guides the door/drawer along its track to keep movement smooth and aligned
• Protects the door edge and track from chipping, scraping, and premature wear
• Eliminates rubbing or catching noises caused by a damaged or missing guide
• Helps restore proper door/drawer fit and operation when the original guide is broken or worn

• One cover guide

• High-level snap-on or screw-on replacement; basic tools (screwdriver) may be required
• Disconnect power to the appliance before starting work when accessing internal areas
• Inspect the surrounding track and hardware for damage and replace if necessary
• Do not force the part into place; confirm correct orientation before fastening

A replacement door screen that restores the barrier at the appliance door opening and helps keep debris out of the door cavity. Fits into the door assembly to maintain proper airflow path and appearance. What it does:

• Provides a protective mesh/cover at the door to help block lint, crumbs and other debris from entering the door cavity
• Helps maintain the designed airflow path through the door opening for proper appliance operation
• Replaces torn, clogged or damaged screens that cause visible debris buildup at the door
• Reduces risk of small objects getting stuck in the door area and contacting internal components

• Disconnect power to the appliance before beginning any service
• Remove the door or inner door panel per the appliance service instructions to access the screen
• Handle the screen gently to avoid bending or damaging mounting tabs; use approved fasteners if required